Dia 40mm titanium fiber felt is made by a special laying process and a special ultra-high temperature vacuum sintering process. Compared with titanium powder sintered plate, Ti fiber felt has an excellent three-dimensional network, porous structure, high porosity, large surface area, uniform pore size distribution, special pressure, and corrosion resistance, and can be rolled and processed. Titanium fiber felts are widely used in military, aerospace, civil, medical care, and other industries abroad. Titanium fiber felts are primarily used in electrolyzer stacks as the flow field or diffuser material, particularly on the oxygen (anode) side. Features: has an excellent three-dimensional network porous structure; high porosity, several times larger surface area; uniform pore size distribution, strong corrosion resistance, good water permeability; high porosity, and heat dissipation; good performance, high current density, low voltage, stable performance, long life, and so on. Parameters Color: Light grey Dimension: Customized as request Thickness:0.2mm-2mm Often made thickness (0.25,0.4,0.6,0.8mm) Porosity:30-50%
Billets, Plates, Disks, Square Bars, Rings, Tubes, Wires, Forgings, Flanges And Other Standard Parts Of Titanium And Titanium Alloy.
All types of titanium fasteners, tubes, sheets, bars and customized parts.
Titanium welded tubes, titanium seamless tubes, titanium tubes, titanium pipes, titanium sheets, titanium plates, titanium foils, titanium coils, titanium bars, titanium rods, titanium wires, titanium clad, titanium rings, titanium discs, titanium forgings, titanium pipe fittings, titanium flanges, titanium elbows, titanium castings, titanium fasteners, titanium anode baskets, titanium meshes, titanium implants bars.
Titanium tubes, titanium plate and sheet, titanium bar and rod, titanium forgings, titanium fittings and flange.
Foil Thickness: 0.05-0.5 mm; Width:300-500 mm, Sheet Thickness: 0.6-30 mm; width:1500-2000 mm. Grade 1, 2, 4, 5, and 7. Submit LOI / RFQ along with KYC/CIS. one full service of the shipments, we are available provide FOB, CIF, DDU and DAP.
OD: 5-600mm/0.2-24; Length:100mm-6000meter. Grade 1, 2, 5, 7 and 23 Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 50 Kg
SML tube OD:3-114mm / 0.12-4.5; Wall thickness:0.2-9mm; Welded tube: OD:4-914mm/0.16-36; Wall thickness:0.4-30mm; Length: 100-6000mm Grade: GR1,GR2,GR7,GR9,GR5,GR12. Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 50 Kg
OD:0.5-4.9mm/0.02-0.2; Length:500-1500 mm Grade: ERTi-2,ERTi-5,ERTi-7,ERTi-9 Surface:Pickling,Polished Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 5 - 10 Kg
OD:20-114mm/0.78-4.5 Wall thickness:1.65-4mm; Length:500-3000mm. Grade:Gr1,GR2,GR5,GR9,GR7,GR12 Submit LOI / RFQ along with KYC/CIS one full service of the shipments, we are available provide FOB, CIF, DDU and DAP. MOQ = 100 Kg
Grades : Grade 1, Grade 2, Grade 3, Grade 4, Grade 5, Grade 7, Grade 9, Grade 23 Type: Seamless / Erw / Welded/ Fabricated Range : 15 NB UP TO 600 NB IN SCH 5S, 10S, 10, 20, 40S, 40, STD, 60, 80S, 80, XS, 100, 120, 140, 160 etc. Form Round, square, rectangular, hydraulic etc. Length Single Random, Double Ranidom & Cut Length End Plain End, Bevelled End, Treaded
Sheet and Plates Specifications 1)hot and coll rolled, Gr1~Gr23 2)Thickness:0.3mm - 60mm 3)Length:6000mm 4)ASTM B265,ASTM 4911,F67,F136 Material :titanium and titanium alloys Pure Titanium Grade : GR1, GR2, GR3, GR4 Titanium Alloy Grade : GR5 (6% Al, 4%V) GR6 (5% AL, 2.5%Sn) Gr.7 (Titanium + Pd) Gr.9 (3% Al, 2.5%V) Gr.10 (11.5%Mo, 6% Zr, 4.5% Sn) Gr.11 (Titanium + Pd) Gr.12 (0.3% Mo, 0.8% Ni)
Specifications : Titanium round bar Grade: Gr1, Gr2, Gr3, Gr5, Gr7 Standard: ASTM B348, ASTM F136, ASTM F67, AMS 4928 Specification: 1. Grade : Gr1, Gr2, Gr4 ,Gr5,Ti-6AL4V ELI,Gr.7, Gr.9, Gr.12 2. Standard : ASTM B348, ASTM F136, ASTM F67, AMS 4928 3. Size: Diameter : 4mm to 350mm, Length: 50mm to 6000mm 4. Payment : T/T or L/C at sight 5. MOQ : 10 kg 6. Package : Ply wooden case or as request 7. Delivery time : 7- 30 days after confirmed 8. Applications: industry, glasses so on
Description : High Quality titanium round bar Standard : ASTM AISI SUS SS EN DIN JIS Specification: Diameter: 3mm-400mm Length: 3m, 4m, 5.8m, 6m, 11.8m or other length as requirement Type:Round bar Characteristic: Stainless steel bar is lower percent of C and Mo,which is excellent corrosion ,resistance in Ocean and Chemical Industry Surface Treatment : Bright ,Polishing ,Peeled,Bright or as your requirement Application : Stainless Steel Round Bar is mianly used in 1:Electric power,petroleum,boiler, high temperature resistant, low temperature resistant,corrosion resistant 2:Tableware, cabinet, cutting tool, boiler, auto part 3:Medical instruments, building materials, food industry 4:Sea,chemical industry and Machine Manufacture
Titanium exhaust tubing is characterized by its lightweight, high strength, corrosion resistance and heat resistance. The density of titanium alloy is only 60% of steel, but the strength is even better. At the same strength, the titanium exhaust tubing is lighter than stainless steel, suitable for race cars and motorcycles owners who pursue the ultimate lightweight modification. Titanium Seamless Tube is a long strip of tubing made of titanium alloy with a hollow section and no seams around it. It was originally used primarily for the manufacture of aircraft engine compressor components and structural components for rockets, missiles and high-speed aircraft. Since the mid-1960s, it has been gradually applied to electrodes in the electrolysis industry, condensers in power stations, heaters for oil refining and seawater desalination, and environmental pollution control devices. The titanium welding pipe is obtained by welding a titanium or titanium alloy coiled strip or a wide-width sheet into a tubular shape by crimping. It has been widely used in electric power, seawater desalination, water treatment equipment, air conditioning equipment and other industries, but in the petrochemical industry, the use of titanium welded pipes is still being promoted.
FS Titanium is the professional and leading manufacturer of high-quality all kinds of titanium and titanium alloy products in China. Commodity: Lamborghini Titanium Lug bolts, Lamborghini Titanium Wheel Bolts Material: GR5 Titanium, Ti-6Al-4V Color: Natural, Hand Burnt Blue, PVD Black Application: Lamborghini Gallardo Size: M14x1.5, Cone ( Tapered ) Seat Thread Length: Accept customized size Weight: 70g Delivery via DHL/FedEx IP, fast shipping Perfect for replacing rusted and/or broken lug bolts Our Titanium wheel lug bolts are great for showing off your wheels and enhancing the overall look of your vehicle. titanium wheel lug bolt, ti6al4v,lamborghini lug bolts, titanium bolts, lamborghini Gallardo wheel, T80 bolts, T70 bolts, racing bolts, lug nuts, wheel nuts
FS Titanium is the professional and leading manufacturer of high-quality all kinds of titanium and titanium alloy products in China. Commodity: Lamborghini Titanium Lug bolts, Lamborghini Titanium Wheel Bolts Material: GR5 Titanium, Ti-6Al-4V Color: Natural, Hand Burnt Blue, PVD Black Application: Lamborghini Gallardo Size: M14x1.5, Cone ( Tapered ) Seat Thread Length: Accept customized size Weight: 70g Delivery via DHL/FedEx IP, fast shipping Perfect for replacing rusted and/or broken lug bolts Our Titanium wheel lug bolts are great for showing off your wheels and enhancing the overall look of your vehicle. titanium wheel lug bolt, ti6al4v,lamborghini lug bolts, titanium bolts, lamborghini Gallardo wheel, T80 bolts, T70 bolts, racing bolts, lug nuts, wheel nuts
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product. We manufacture Titanium pipe fittings , including socket welding fittings, butt welding fittings and threaded fittings : Titanium Elbow (45�°, 90�°, 180�°) Titanium Reducer (Concentric, Eccentric). Titanium Tee (Straight, Reducing). Also stub ends, caps, flanges etc. Standard: ASME B16.5, ASME B16.9, ASME 16.11
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU by TUV and a professional manufacturer and exporter of titanium material and product. We manufacture Titanium Wire and Welded Wire: Titanium wire: GR1, GR2, Ti-6AL-4V Diameter (0.03-6.0mm) Straight length/Spool/Coil with ASTM B863 Titanium welded wire: ERTi1, ERTi2, ERTi3, ERTi4, ERTi5, ERTi7, ERTi9, ERTi12, ERTi23, Diameter: 0. 05mm~10mm (0.002inch-0.4inch) Straight length/Spool/Coil with AWS A5.16 standard.
CDM Titanium is an approved ISO9001:2015 & PED 14/68 EU TUV and a professional manufacturer and exporter of titanium material and product. We manufacture Titanium metal clad material / Explosive clad metal material / Titanium tube sheet for process equipment. Such as Ti Gr2 as clad material, Steel A516 GR70 as base material. Standard as per ASTM B898.
