Introduction to the Product These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm. Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to UVA and UVB, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid. Characteristics of the Product HTTi-01 is a nano powder made of nano TiO2 mixed with some metal or metal oxide. Its crystal is anatase, and it may be used for producing photocatalyst. Under the illumination of light of less than 400 nm, the valence electrons of this powder are sent to the conduction band to put the electron and cavity in action with O2 and H2O absorbed on their surface and produce superoxide anion radicals. These radicals have the function of decomposing hazardous gas and organic pollutants through photo catalysis and antisepsis through photo catalysis, and can be widely used in air purification and sewage treatment. Moreover, this product is characterized by low cost, good stability, high photocatalytic activity and wide range of absorption of light wave. HTTi-01-W and HTTi-01-Mn has the highest catalytic activity, HTTi-01-N also has high catalytic activity. These products can be used in the field of decomposition the automobile exhaust, increasing fuel combustion efficiency and sewage treatment, etc. Technical Index Model: HTTi-01 Appearance: White powder Content of titanium oxide (%): 99 Average of the grain size (nm): 10 Specific surface area (m2/g): 150 Crystal /surface treatment by: anatase Characteristics: large specific surface, high photocatalytic activity Model: HTTi-01-W Appearance: White powder Content of titanium oxide (%): 94 Average of the grain size (nm): 10 Specific surface area (m2/g): 100 Crystal /surface treatment by: anatase Characteristics: highest photocatalytic activity 5/10kg/bag
Introduction to the product These series products of nano titanium dioxide are independently developed by our corporation and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of less than 100 nm. Nano titanium dioxide of our corporation has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Nano titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid. Characteristics of the product Htti-03-h and htti-04-h are made for cosmetics. The model of htti-03-h is hydrophilic, while htti-04-h is lipophilic. These products have very good characteristics of even granularity and more excellent absorbency to uva and uvb than sun organic screener. They are widely and safely used as inorganic sun screener in the cosmetics and well compatible with other raw materials. They are the ideal additive of the sunscreen, anti-ultraviolet rays cosmetics. Technical index Model: htti-03-h Appearance: white powder Content of titanium oxide (%): 88 Average of the grain size (nm): 30 Specific surface area (m2/g): 100 Crystal /surface treatment by: especially for cosmetics, hydrophilicity Characteristics:good transparency, clear blue light and has the ability to resist the ultraviolet ray Model: htti-04-h Appearance: white powder Content of titanium oxide (%): 85 Average of the grain size (nm): 30 Specific surface area (m2/g): 100 Crystal /surface treatment by: especially for cosmetics, lipophilicity Characteristics:idem 5/10kg/bag
Titanium dioxide, rutile titanium dioxide, anatase titanium dioxide, soda ash, caustic soda, formic acid, oxalic acid, glacial acetic acid, phosphoric acid, boric acid, sulfamic acid, stearic acid, dodecyl benzene sulfonic acid (dbsa), sodium formate, chrome oxide green, lead oxide, iron oxide, iron oxide red, iron oxide yellow, aluminum tripolyphosphate, zinc oxide, chrome yellow, lithopone, carbon black, sodium bicarbonate, hydrogen peroxide, sodium metabisulphite, polyacrylamide(pam), aluminium dihydrogen phosphate, zinc phosphate, aluminium sulphate, copper sulfate, sodium hexametaphosphate, calcium chloride, ultramarine blue, sodium tripolyphosphate
Property: Titanium dioxide pigment (TiO2) is a white powder with high opacity, brilliant whiteness, excellent covering power and resistance to colour change. Application: Paint & coating, rubber, printing inks, plastics, rubber, paper making and leather industries etc. Packing: 25 kg/bag, 22MT/20'FCL
Titanium Dioxide Rutile Type (Chlorination Process) Content% ---------------------------------------------- 93Min Tint Redusing Power% ---------------------------- 100 Min Oil Absorption (g/) ------------------------- 22 Max pH value ------------------------------------------------ 6.5-8.0 45 um SieveResidue %---------------------------- 0.1Max Water-soluble Matter% ----------------------------- 0.3Max Rutile Content% ------------------------------------- 98Min Appearance: White Powder Packing: 25kgs net bag, 22mts in the 20'FCL Usage: It is widely used in the industries of aqueous and solvent-based paints, electro-deposition paints, coating, plastics, rubber, printing ink, high quality paper, waxed paper and leather finishes, cosmetics, ceramic, etc.
Please check the spec. As follows : Titanium dioxide anatase type Tio2 98%min Volatile content 0.4%max Water soluble matter 0.5%max Oil absorption 26%max Suspension ph 6.5 to 8.0 Titanium dioxide rutile type Tio2 93%min Water soluble matter 0.3%max Oil absorption 22%max Suspension ph 6.5 to 8.0 45umsieve residue 0.1% Chemical formula: tio2 Appearance: white powder Packing: 25kgs net bag, 22mts in the 20í»fcl Usage: it is widely used in the industries of aqueous and solvent-based paints, electro-deposition paints, coating, plastics, rubber, printing ink, high quality paper, waxed paper and leather finishes, cosmetics, ceramic, etc. We can provide sample if required . Packing: 25kgs net bag, 22mts in the 20í»fcl
Introduction to the product These series products of pure titanium dioxide are independently developed by our company and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of 30nm1200nm. Pure titanium dioxide of our company has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Pure titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid. Technical index Parameters (anatase tio2) Molecular formula:tio2 Cas no.:13463-67-7 Einecs no.:236-675-5 Grade:high purity titanium dioxide Appearance:white powder Type: micro material Model: httip-01-500 Httip-01-1200 Purity: 99.9% 99.9% Average particle size d50: 0.5um 1.2um Specific surface area(bet): 7m2/g 2m2/g Moisture: 0.3% 0.3% Parameters (rutile tio2) Molecular formula:tio2 Cas no.:13463-67-7 Einecs no.:236-675-5 Grade:high purity titanium dioxide Appearance:white powder Type:micro material Model:httip-02-500 Httip-02-1200 Purity: 99.9% 99.9% Average particle size d50: 0.5um 1.2um Specific surface area(bet): 7m2/g 2m2/g Moisture: 0.3% 0.3% Application Base materials in electron components, for example multilayer ceramic capacitors (mlcc); cosmetics; textiles, ceramic capacitors, positive temperature coefficient thermistors, spurting materials, optical glass and steel. Packing: 5/10 kg/box (bag)
Introduction to the product These series products of pure titanium dioxide are independently developed by our company and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of 30nm1200nm. Pure titanium dioxide of our company has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Pure titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid. Technical index Parameters (anatase tio2) Molecular formula:tio2 Cas no.:13463-67-7 Einecs no.:236-675-5 Grade:high purity titanium dioxide Appearance:white powder Type: micro material Model: httip-01-500 Httip-01-1200 Purity: 99.9% 99.9% Average particle size d50: 0.5um 1.2um Specific surface area(bet): 7m2/g 2m2/g Moisture: 0.3% 0.3% Parameters (rutile tio2) Molecular formula:tio2 Cas no.:13463-67-7 Einecs no.:236-675-5 Grade:high purity titanium dioxide Appearance:white powder Type:micro material Model:httip-02-500 Httip-02-1200 Purity: 99.9% 99.9% Average particle size d50: 0.5um 1.2um Specific surface area(bet): 7m2/g 2m2/g Moisture: 0.3% 0.3% Application Base materials in electron components, for example multilayer ceramic capacitors (mlcc); cosmetics; textiles, ceramic capacitors, positive temperature coefficient thermistors, spurting materials, optical glass and steel. Packing: 5/10 kg/box (bag)
Introduction to the product These series products of pure titanium dioxide are independently developed by our company and divided into two crystal forms of anatase and rutile with an appearance of white powder, high purity, characteristics of even granularity and average grain size of 30nm1200nm. Pure titanium dioxide of our company has the properties of good transparency, and excellent absorbency to uva and uvb, except for the properties of normal titanium dioxide. It also has good properties of chemical stability, thermal stability. Pure titanium dioxide is insolubility in water, organic acid and weak inorganic acid, and solubility in sulfuric acid, alkali and hydrofluoric acid. Technical index Parameters (anatase tio2) Molecular formula: tio2 Cas no.: 13463-67-7 Einecs no.: 236-675-5 Grade: high purity titanium dioxide Appearance: white powder Type: nano material Model: httip-01-30 Httip-01-50 httip-01-100 Purity: 99.8% 99.9% 99.9% Average particle size d50: 30nm 50nm 100nm Specific surface area(bet): 30m2/g 20m2/g 13m2/g Moisture: 0.8% 0.6% 0.5% Parameters (rutile tio2) Molecular formula: tio2 Cas no.: 13463-67-7 Einecs no.: 236-675-5 Grade: high purity titanium dioxide Appearance: white powder Type: nano material Model: httip-02-30 httip-02-50 Httip-02-100 Purity 99.8% 99.9% 99.9% Average particle size d50: 30nm 50nm 100nm Specific surface area(bet): 30m2/g 20m2/g 13m2/g Moisture: 0.8% 0.6% 0.5% Application Base materials in electron components, for example multilayer ceramic capacitors (mlcc); cosmetics; textiles, ceramic capacitors, positive temperature coefficient thermistors, spurting materials, optical glass and steel. Packing: 5/10 kg/box (bag)
Items Titanium Dioxide Rutile Type Titanium Dioxide Anatase Type Content 93%Min 98%Min Tint Redusing Power 100% Min 100% Min Oil Absorption (g/100g) 22 Max 26 Max Ph value 6.5-8.0 6.5-8.0 45 um SieveResidue 0.1%Max 0.1%Max Water-soluble Matter 0.3%Max 0.5Max Rutile Content 98%Min - Volatile Matter(105D) - 0.40Max . Weight 25kg per bag.
We offer Titanium Ore Rutile Sand & Powder. Parameters: Ti 67% Fe 10% Si 1.0% Mg 7.1% P 0.3% V 0.2% Terms: Minimum Order: 25MT, F.O.B. Price: 1.230 USD per MT, from APAPA, LAGOS, NIGERIA
Titanium dioxide, it is a dye and pigment, its molecular formula is TiO2, molecular weight is 79.8658. It is a kind of white inorganic pigment, with non-toxicity, optimal opacity, optimal whiteness and brightness, and it is considered to be the best performance of a kind of white pigment in the world nowadays. Because of its stable physicochemical properties and excellent optical properties and photochemical activity, titanium dioxide has been used in coatings, plastics, rubber, chemical fiber, paper making, ink, cosmetics, capacitors, cutting edge technology of national defense, toys, food, medicine, chemical reagents, electrode, enamel, ceramics, glass, refractory materials, metallurgy, artificial gemstones, fine art pigments, leather, printing and dyeing pastes, soaps, decorative panels, Asphalt bricks, polyester catalyst, photocatalysis, solar cells and other fields have been widely used.
TiO2 is Zirconium and Alumina coated Rutile titanium dioxide pigment,We adopt professional technology of Hydrolysis, calcination and special surface treatment.It is an universal grade which has good whiteness, easy dispersion, low oil absorption, and high tint-reducing power.
Introduction: Artificial Rutile is also called Synthetic Rutile. Its TiO2 content varies from 91% to 96% depending on the processing technology. It is a high-quality substitute for natural rutile. Application: Synthetic Rutile can be used to make high-quality welding electrodes; titanium dioxide can be used to make high-grade white paints, coatings, lightening agents for rayon, white rubber and fillers for high-grade paper. Titanium, titanium metal, enamel products and electrode coatings can also be used to produce artificial rutile yellow pigments.
RUTILE CONCENTRATE (rutile sand, rutile) TiO2 min 95-96%, CAS number: 1317-80-2; Minimum Order Quantity: 1 truck - 22mt; Packaging: 1000kg big bags; Payment terms: T/T, LC; Terms of delivery: DAP-Europe
T-101 is a high whiteness, blue substrate product specially designed for high concentration film grade plastic color master, color sheet formula.
T-102 is widely used in water-based coatings, solvent based coatings, powder coatings, inks and paper making.
T-103 is a titanium dioxide powder specially designed for outdoor water-based coatings and oil-based coatings, and can also be used in some inks.
T-104 is suitable for high and low pressure plain paper and grain paper and decorative paper and decorative foil.
T-105 is suitable for PVC profiles, PVC pipes, powder coatings, road sign coatings and plastic products with high weather resistance requirements.
