PA/PE (UGB Series) PA based barrier films Film structure : PE/PE/TIE/PA/TIE/PE/PE Film structure : PA/TIE/PA/TIE/PE/PE/MPE Medium barrier to gas ,oxygen Excellent sealability Excellent barrier to water vapour High gloss, transparency, printability (dissymmetric) PE/PA/EVOH (SHB Series) PA-EVOH barrier film Film structure : PA/EVOH/PA/TIE/PE/PE/MPE Film structure : PE/TIE/ PA/EVOH/PA/TIE/PE High barrier to gas ,oxygen Excellent sealability Excellent barrier to water vapour PP/PA (UGB Series) PA based barrier films PA/TIE/PA/TIE/PP/PP/MPP Medium barrier to gas , oxygen Excellent sealablity Excellent barrier to water vapour High gloss ,transparency,printability (dissymmetric) Pasteurization and retortable (PP/PA) PP/PA/EVOH (SHB Series) PA-EVOH barrier films PA/EVOH/PA/TIE/PP/PP/MPP High barrier to gas , oxygen Excellent sealablity Excellent barrier to water vapour High gloss ,transparency,printability (dissymmetric) Pasteurization and retortable (PP/PA)
Co-extruded Oriented Down-gauge PE Film (Grade no. DL) BOPE is a type of Co-extruded Bi-axially Oriented PE film offers a number of benefits over traditional blown PE: High web strength allows as much as 50% Reduction of the total thickness of packing materials. Outstanding hot tack and heat sealing performance for high speed lamination and FFS operation. Excellent optical property, web flatness, and High stiffness, impact-resistance, puncture-resistance at low temperature down to -30â?? Good barrier performance. Stable surface tension provides good printing conditions.
Nylon film and special grades
BOPET PET film (Polyester Film) and special grades BOPET FILMS - PET films offer polyester film products that provide excellent performance characteristics suitable for use in packaging, electrical and industrial applications GT TYPE Good transparency ,good flatness,good processing performance. Thermal shrinkage is small. HEATSALABLE FILM Heatsealable BOPET for food packaging ,medicine and electric equipment.High strength,Good transparency and good barrier property CHEMICAL COATING FILM The enchanced printing base membrane mainly as composite layer of soft packaging materials, for printing table can maintain high ink adhesion ,can make the ink particle ,round and full,clear resolution ideal printing effects. Enhanced plaiting aluminium film,single -sided coating process/the other side coating treatment ,corona treatment.Because of the thin film surface through chemical processing ,thin film and aluminium layer of high adhesion,peel strength reached more than 4 N/15 mm,due to their high aluminium layer flatness ,does not appear to be can increase the thickness of aluminium layer thickness has the higher barrier property ,good temperature resistance. Features: Metallized film, non â?? heatsealable One side corona treatment Excellent gloss and stiffness Excellent dimensional stability,good machinability Recommend use primer lacquer before printing to get better ink adhesion. Metallized side should not contact with food.
MPET Very high gloss of metallic with supreme appearance strong texture of PET film, high strength & stiffness.Excellent metal adhesion and barrier property Packaging Microwave susceptor film Decoratives / Board Lamination film Bag-in-box laminates High barrier laminates tea, coffee, dairy packs
BOPP films are transparent bi-oriented polypropylene films designed to offer high performance, good appearance and easy converting for flexible packaging and other applications GT TYPE Plain films are mostly used for printing and lamination industry whereby we have a strong reputation in providing an excellent film quality to meet the ever changing stringent quality demand HEATSALABLE FILM Heatsealable BOPP fil m mainly produced for the application to provide an overwrap film.This grade does not require any lmination sealing layer as the skin of the film is of heat seal.The film comes with either no,one side or both side corona treatment to improve wetting tension and it comes in both side heat sealble.Our series are formulated with anti-static agent or excellent machineabillity which is also suitable for printing and lamination. ANTIFOGGING This series were manufactured with excellent antifogging property for clod display of freas produce.Corona is treated at both sides of films for printing and lamination proposes.Both sides of the films are heat sealable for both lap and fin seal Translucent, non heat sealable One side corona treatment Low static, good matt surface Features: Metallized film, non â?? heatsealable One side corona treatment Excellent gloss and stiffness Excellent dimensional stability,good machinability Recommend use primer lacquer before printing to get better ink adhesion. Metallized side should not contact with food.
CPP CPP films are transparent cast polypropylene films designed to offer high performance, good appearance and easy converting for flexible packaging and other applications. CPP films are also produced from a combination of various grades of PP polymer. Key characteristics of CPP films are -High Clarity and Gloss -Higher seal strength -Good hot tack strength -Good anchoring of inks and adhesive to Treated Surface -Good machinability on Packaging line -Resistance to grease and oil -Good resistance to tears & puncture -Good moisture barrier -Low static properties
Special designed for vacuum metallizing application Goood aluminium bonding strength exceptional heat seal temperature & high seal strength GT TYPE VMCPP film is a coextruded cast polypropylene, with one side heat sealable layer and one side metalized layer. -Good moisture barrier -Good UV light barrier -Excellent heat seal strength -Good metal adhesion. HIGH BOND TYPE VMCPP FILMS is a coextruded cast polypropylene, with one side low heat sealable and one side metalized layer with better bonding strength to BOPP and good bonding strength to BOPET with opaque ink -Better bonding strength Low sealing temperature Excellent metal adhesion.
Clear grip seal carrier bags are ideal for showing off your product. They can be opened and closed repeatedly with a squeeze-to-seal closure. Available in four handy sizes.
PL4R30 Clear Grip Seal Bag (30% Recycled) 89mm x 114mm x 50 micron (3.5" x 4.5" x 200 gauge) Small plain grip seal bag (C7 to fit A7) made with 30% recycled content, with a 50 micron (200 gauge) thickness. Boxed in 1000's.
Zipper bag and jumbo bag lldpe/hd/pp/ld with competitive price and high qualified product.we are certified by iso ,gmp and hacpp, aluminium foil, lamination adhesive, clear grip seal carrier bags, heavy duty grip seal bags, specimen bags, white full label for, bottom gusset, bopp film, nylon film, barrier film, bope film, pet film, cpp films, vmcpp film.
Easy to open and close again and again.....and again. These self-sealing bags are also known as minigrip, grippa or grip-lock bags. Our warehouses are full with different sizes and varieties of grip seal bags awaiting your order!
Customize brand for brand owner.
A panelled range of self-sealing bags with 3 matt white write-on-panels so that you can label contents with a pen or pencil. It's worth adding that all our standard grip seal bags are 50 micron (200 gauge) thick so are better quality than some of the thinner alternatives.
Self-seal grip seal bags where extra bag strength is required; these are 350 gauge (87 micron) thick. See also Duogrip bags.
A range of self-sealing grip-seal bags with an attached pouch for record cards or documents - what you put in the bag is your business but customers include hospitals, laboratories, doctors, police forces and headmasters!
Industry-standard antistatic grip-seal bags that prevent the build-up of static electricity through a static-dissipative coating on the surface of the bag. Ideal for the storage of non-static-sensitive parts that accompany electronic goods, such as instruction manuals, nuts and bolts etc. Made with polythene with a distinctive red-tinted colouring - which appears pink - these bags are popular for storing small parts on factory assembly lines as the antistatic polythene does not attract dust. For protection of sensitive electronic components from electrostatic discharge (ESD) in a resealable bag, see our range of grip seal static shielding bags.
Opaque black grip seal bags. A range of reusable self-sealing bags from small up to A4+ size all in a stylish glossy black. Ideal for colour-coded storage.
Our great range of coloured grip seal bags! We are the first packaging company to offer this vibrant range of gripper bags and with black and 3 bright colours to choose from, they are ideal for colour-coded storage, sorting and quick-referencing or perfect to add a little zing to your packaging. Each bag has a squeeze-to-seal closure, which means they can be opened and closed repeatedly. Each colour is available in 6 different sizes.
Medium Grip Seal Carrier Bag 300mm wide x 400mm long + 75mm grip seal, 90 micron thickness. Medium transparent 90 micron grip seal bag with punched out carrier handle. 300 mm wide x 400mm long, plus 75mm above the gripseal. Ideal to protect any items from moisture or dirt. Bagged in 100's and boxed in 400's
