R1234YF now with UV Dye leak detection Adding UV Dye to automobile refrigerant systems to detect leaks has long been a trick of the trade Honeywell is now offering the same benefit with R1234yf UV This technology provides precise leak detection shortened service times accurate repair verification and increased customer satisfaction Solstice yf refrigerant with UV dye will allow service technicians to maintain these benefits when servicing vehicles that were built with R1234yf Solstice yf for heavyduty vehicles Due to the AIM Act in the US and FGas in the EU the allowable production and consumption of HFC quota in the US and EU will reduce again in 2024 As a result the supply and price of 134a may become more volatile With additional HFC quota reductions planned beyond 2024 134a volatility is expected to continue to increase as the US and EU essentially phase out all HFCs over the next decade In fact the US has proposed a ban of 134a in all HeavyDuty OffRoad vehicles effective 2026
Honeywell's Solstice zd (R-1233zd) is an innovative refrigerant designed as a non-flammable, ultra-low Global Warming Potential (GWP) alternative to R-123. It offers significant environmental benefits with a GWP of 1, making it 99.9% lower than R-245fa. This refrigerant is particularly suitable for low-pressure centrifugal chillers and applications such as Organic Rankine cycle (ORC) and high-temperature heat pumps. Key Features: Non-flammable: Ensures safety in various applications. Ultra-low GWP: Significantly reduces the environmental impact compared to traditional refrigerants. Versatile Applications: Ideal for HVAC systems and advanced energy systems. Related Products: We also offer a range of other Solstice products, including: SOLSTICE yf (R-1234yf) SOLSTICE ze (R-1234ze) SOLSTICE L-40X (R455A) SOLSTICE L-41z (R477B) SOLSTICE N-40 (R488A) Packing specification: 22.7kg / 100kg / 1000kg / tank truck
Ortho Xylene also referred to as O-Xylene is an aromatic hydrocarbon and its formula is C6H4(CH3)2. It is one of the constituents of the three isomers of xylene, namely p-xylene and m-xylene. Concentration: 99 - 100% Physical State: Liquid Odor: Aromatic Appearance Colorless
Factory price 98% 99% Mixed xylene for Industrial and Agriculture Grade C8H10 CAS 1330-20-7 CAS No.: 1330-20-7 Chemical Formula: CH Description: Xylene is a colorless, transparent liquid with a pungent, characteristic odor. It is a flammable substance that can easily mix with ethanol, ether, and various other organic solvents, but is insoluble in water. Xylene is composed of three isomers: 45% to 70% m-xylene, 15% to 25% p-xylene, and 10% to 15% o-xylene. It has a boiling point range of 137140C and is commonly used in the production of petrochemicals, paints, coatings, and solvents. Specifications: CH Content: Grade I: 99% min Grade II: 99% min Chroma: Grade I: 10 max Grade II: 20 max Evaporation Residue: Grade I: 0.001% max Grade II: 0.002% max Acidity (mmol/g): Grade I: 0.00025 Grade II: 0.0005 Alkali (mmol/g): Grade I: 0.00025 Grade II: 0.0005 Sulfur (S) Content: Grade I: 0.003% max Grade II: 0.005% max Benzene Content: Grade I: 0.1% max Grade II: 0.2% max Toluene Content: Grade I: 0.1% max Grade II: 0.5% max Ethylbenzene Content: Grade I: 19% max Grade II: 24% max Water Content (Hâ??O): Grade I: 0.03% max Grade II: 0.06% max
Melamine Cyanurate used for V-0 grade nylon(PA66 and PA6) and glass fiber reinforced nylon flame retardancy Category: Flame Retardant Powder Tags: Film Grade, Masterbatch, Polyester Chips, Textile Grade Classification: Inorganic Flame Retardant CAS No.: 68333-79-9 Product Description: Melamine Cyanurate (MC) is a halogen-free flame retardant commonly used in unfilled polyamide (PA) products. It provides exceptional flame retardancy, achieving the UL 94 V0 flame retardant rating in materials such as nylon PA66 and PA6. MC is recognized for its unique crystal structure and excellent dispersibility, making it highly suitable for various polymer applications. Key Applications: Flame Retardancy: PA6, PA66 (nylon) PBT, PET TPE, EVA, PE Silicone Rubber, Epoxy Resin Rubber Products MC is an effective solution for enhancing the flame retardant properties of these materials, ensuring both safety and performance in a wide range of industrial applications.
Product Name: Diethylene Glycol (DEG) CAS No.: 111-46-6 Molecular Formula: CHO Molecular Weight: 106.12 g/mol EINECS No.: 203-872-2 Physical Properties: Melting Point: 10C (lit.) Boiling Point: 245C (lit.) Density: 1.118 g/mL at 25C (lit.) Appearance: Colorless liquid Purity: 99% Applications: Diethylene Glycol (DEG) is widely used in the manufacturing of plasticizers and serves as a key component in various industrial applications, including: Extractant Desiccant Insulation agent Softener Solvent
High Quality Mono Ethylene Glycol /Ethylene Glycol Price CAS 107-21-1 Molecular Formula: CHO Density: About 1.11 g/cm Boiling Point: 197 C Melting Point: -13 C Purity: Typically >99.5% for industrial applications
Ethylene Glycol is an important organic compound with the chemical formula CHO, commonly known as ethane-1,2-diol. It is a colorless, odorless, and sweet-tasting viscous liquid. Due to its unique properties, ethylene glycol is widely utilized across various industries. Key Properties: Boiling Point: Approximately 197.3 C (388.1 F) Melting Point: -12.9 C (8.8 F) Density: About 1.11 g/cm
Naphthalene Dicarboxylate (NDC) Naphthalene Dicarboxylate (NDC) is a specialized chemical compound utilized primarily in the production of advanced polyesters and resins. It plays a crucial role in manufacturing high-performance items such as: LCD Flat Panel Displays: NDC enhances the properties of materials used in screens, contributing to better display quality and durability. Ultra-Thin Data Storage Tapes: The compound is key in producing data storage solutions that require thin, flexible materials without compromising performance. NDC is part of IVL's High-Value Added (HVA) product portfolio, highlighting its importance in innovative applications across various industries, including electronics and data storage.
Purified Terephthalic Acid (PTA) Purified Terephthalic Acid (PTA) is a key organic compound formed through the reaction of paraxylene (PX), a secondary petroleum product, with acetic acid. PTA is primarily used in the production of Polyethylene Terephthalate (PET), a widely utilized polyester. During polymerization, PTA is combined with other chemicals to produce PET, which appears as a white crystalline powder. Key Characteristics: Safety: PTA is considered to be non-toxic and is classified as flammable, with the potential to ignite in the presence of sufficient air. Applications: As a crucial organic raw material, PTA finds extensive use in various industries, including: Chemical Fiber Industry: Essential for producing synthetic fibers. Light Industry: Used in a variety of consumer products. Electronics Industry: Integral in the manufacturing of electronic components. Construction Industry: Utilized in various construction materials and applications.
Paraxylene (PX) is an important aromatic hydrocarbon with various industrial applications, primarily in the production of purified terephthalic acid (PTA), which is a key precursor for polyester fibers and polyethylene terephthalate (PET). Here are some of its notable properties and uses: Properties of Paraxylene: Melting Point: 12-13 C Boiling Point: 138 C Density: 0.861 g/mL at 20 C Vapor Density: 3.7 (compared to air) Vapor Pressure: 9 mm Hg at 20 C Refractive Index: n20/D 1.495 Flash Point: 77 F Storage Temperature: Recommended at +5C to +30C Solubility: Slightly soluble in water (0.2 g/L) Appearance: Colorless liquid pKa: >15. Applications: PTA Production: Approximately 65% of PTA produced is used to manufacture polyester fibers, which are widely used in clothing and textiles. PET Bottles: About 30% of PTA is converted into PET, commonly used for beverage bottles and packaging. Plastic Products: The remaining 5% is utilized in various plastic products, including films and food containers
HFC-245fa, or 1,1,1,3,3-pentafluoropropane, is a third-generation alternative blowing agent designed to replace chlorofluorocarbons (CFCs) and hydrochlorofluorocarbons (HCFCs) in various applications. It is primarily utilized as a blowing agent for rigid polyurethane (PU) foam, which is extensively used in refrigerators, cold storage, and building boards. Additionally, HFC-245fa serves as a refrigerant, effectively replacing R-123 and R-22 refrigerants in central air conditioning systems (chillers). Quality Index: Purity: â?¥99.8% Moisture (% w/w): â?¤0.0020 Acidity (as HCl, ppm w/w): â?¤0.0001 Evaporation Residue: â?¤0.01 Color: Colorless liquid HFC-245fa's high purity and low moisture content make it suitable for a wide range of industrial applications, ensuring optimal performance and reliability.
Raw Material: Dichloromethane (Methylene Chloride) Dichloromethane, also known as DCM, methylene chloride, or methylene bichloride, is an organic compound commonly used as a solvent in various industrial applications. Chemical Properties: Chemical Formula: CHâ??Clâ?? CAS Number: 75-09-2 Appearance: Colorless, transparent liquid Odor: Irritating ether-like odor with a sweet, chloroform-like scent Solubility: Dichloromethane is slightly soluble in water and fully soluble in ethanol and ether. It exhibits low polarity and is miscible with many organic solvents, making it versatile for various applications. Physical Properties: Under normal usage conditions, dichloromethane is a non-flammable, low-boiling solvent. It serves as an effective replacement for flammable solvents such as petroleum ether and ether, particularly in environments where safety is a concern. However, caution is advised when vapor concentrations become elevated, especially in high-temperature air.
Perchloroethylene, commonly known as PERC or tetrachloroethylene, is a versatile solvent widely utilized across multiple industries. It is particularly renowned for its applications in dry cleaning operations and metal manufacturing, where it serves as an effective cleaner and degreaser. Chemical Properties: Other Names: PERC, PCE, and tetrachloroethylene CAS Number: 127-18-4 Chemical Formula: C2Cl4 Appearance: Colorless, non-flammable liquid Odor: Sweet, ether-like aroma Key Applications: Dry Cleaning Clothes: PERC is primarily used as a solvent in the dry cleaning industry, effectively removing stains and dirt from fabrics. Degreasing and Cleaning Metal Parts: In metal manufacturing, perchloroethylene is employed to degrease and clean metal components, ensuring optimal performance and quality. Finishing Product for Textiles: It is used as a finishing agent in the textile industry, enhancing the appearance and durability of fabrics. Oil and Fat Extraction: PERC is also utilized in the extraction of oils and fats, making it valuable in various food processing applications. Intermediate in Synthesis: Perchloroethylene serves as an intermediate in chemical synthesis, playing a crucial role in the production of various chemical compounds.
ABC Dry Powder Fire Extinguishers utilize mono ammonium phosphate-based dry chemical powders, designed for multipurpose use on Class A, B, and C fires. Available in concentrations of 40% and 90%, these extinguishing agents are SABS approved, ensuring reliability and effectiveness. Applications: Class A Fires: The dry chemical powder insulates Class A fires by melting at approximately 350-400 degrees Fahrenheit. Class A fires typically involve common combustible materials such as wood, paper, or trash. Class B Fires: For Class B fires, the powder effectively interrupts the chain reaction by forming a coating on the burning surface. Class B fires involve flammable liquids or gases, including gasoline, oil, propane, and natural gas. Class C Fires: ABC dry powder is safe and effective for Class C fires, as it is a non-conductor of electricity. Class C fires typically involve live electrical equipment, which requires extinguishing agents that do not conduct electricity, unlike water. It's important to note that electricity can also cause Class A and B fires. Inappropriate Uses: ABC dry chemical powder should not be used on chlorine or oxidizer fires, as the resulting chemical reaction can lead to explosions or the release of toxic gases. Water is recommended for these situations. Additionally, it is ineffective for certain metal fires (Class D) and cooking oil fires (Class K). Due to the corrosive nature of ABC dry chemical powder, it is not advisable to use it around aircraft or sensitive equipment.
HFA 134a (1,1,1,2-tetrafluoroethane) is a non-ozone-depleting candidate used as a propellant in multi-dose inhalers (MDIs). HFA 134a Packaging The available packaging: 3.4kg , 6.8kg, 13.6kg, 22.7kg, 930kg, 20000kg, 300g, 340g, 500g, 800g, and 1000g , Contact us for more details and prices
HFA 152a Medical gas, also known as 1,1,-difluoroethane, is a pharmaceutical-grade propellant widely used in various medical products. Technical Parameters of HFA 152A Appearance: Clear, colorless liquid and vapor Physical State: Gas at ambient temperatures Molecular Weight: 66.05 Odor: Faint ethereal odor Specific Gravity (Water = 1.0): 0.909 @ 21.1�°C (70�°F) Solubility in Water (Weight %): Unknown pH: Neutral Boiling Point: -24.05�°C (-11.29�°F) Freezing Point: -117�°C (-178.6�°F) Vapor Density (Air = 1.0): 2.29 Evaporation Rate: 1 (compared to CCl4 = 1) Volatiles: 100% Flash Point: Not applicable Advantages of HFC-152a: HFC-152a is a versatile compound utilized in various applications, including refrigerants, foaming agents, and aerosol propellants for products such as hair sprays, air fresheners, and insecticides. Additionally, it serves as a key raw material in the production of mixed refrigerants and acts as an intermediate in organic synthesis for vinylidene fluoride, a primary industrial ingredient for polyvinylidene fluoride (PVDF) and fluoroelastomers.
ZeroR AC Refrigerant R134a Replacement 3 6oz Cans for AC Recharging Product Name: ZeroR AC Refrigerant Container Size: 6oz Cans Usage: Designed for R134a systems Key Features: Universal Compatibility: ZeroR AC Refrigerant is a hydrocarbon that safely bonds with chemicals like R134a, R1234YF, and R12. However, it is officially marketed for use in R134a systems due to EPA regulations, which prohibit mixing different refrigerant types. Easy Installation: The product installs similarly to standard R134a refrigerants. Each can feature R134a threads, making it compatible with most R134a can taps. Performance Efficiency: Although ZeroR is low weight compared to traditional R134a, its performance is equivalent to that of 16oz of R134a, providing an efficient solution for automotive air conditioning systems. Eco-Friendly: Made from 100% natural gas, ZeroR AC Refrigerant is a more environmentally friendly alternative compared to R134a, R1234yf, and R12. The product is proudly manufactured in North America. Safety Rating: This refrigerant has a Class 2.1 flammability rating, similar to R1234YF, which is now used in 100% of newly manufactured vehicles. When handled properly and used in approved systems, it presents no danger to users.
Product Name ZeroR R134a Refrigerant Container Size 12oz SelfSealing Container Pack Size Available in 3pack and 6pack options Usage Designed for Mobile Vehicle Air Conditioning MVAC systems Key Features SelfSealing Valve Equipped with a 50 State compliant selfsealing valve design allowing easy storage of partially used cans Freshness Guarantee ZeroR ensures the refrigerant is produced multiple times a year minimizing the risk of moisture and rust affecting performance Environmental Compliance Complies with Section 612 of the EPA Clean Air Act highlighting its commitment to environmental standards USA Made All products are manufactured in the USA ensuring high purity standards Specifications Refrigerant Type R134a Flammability Rating Class 21 Storage Cans are designed for convenient storage and are not returnable due to HazMat classification Applications Ideal for recharging automotive air conditioning systems ensuring efficient and reliable cooling performance
Product Details R134a Refrigerant ORAFON 136 KGS R134a Refrigerant by ORAFON Free leak detector included Replaces R12 refrigerant suitable for refrigeration systems with high to medium temperatures such as car air conditioners refrigerators freezers and chillers Does not deplete the ozone layer reduces global warming and helps save energy A pure singlecompound refrigerant with high cooling efficiency It is nontoxic nonflammable safe and has low moisture content Similar to R22 refrigerant but with less environmental impact Product Information Name R134a Refrigerant Packaging 136 kg Category HFC Chemical Name 1112Tetrafluoroethane CAS No 811972 Lubricant Type POE Molecular Weight 10203 gmol Ozone Depletion Potential ODP 0 No ozone depletion Global Warming Potential GWP 1430 Pressure at 30C 100110 Psi Boiling Point 26C Recommended Compressor Oil POE or PAG lubricants Characteristics Colorless odorless nonflammable
