We can supply sisal fibre... Grade 1, Grade 2, Grade 3, UG and SSUG..... Origin Kenya and Tanzania.
Hello, We supply Viscose fiber offgrade quality with affordable price any requirement
Our meta-aramid fabrics have excellent high temperature resistance, good dimensional stability, excellent spinnability, fire resistance and corrosion resistance. It can be widely used in steel, cement, power plants, chemicals, asphalt and other industries. The meta-aramid with good mechanical properties is a flexible polymer with higher breaking strength than ordinary polyester, cotton and nylon. It has a large elongation, soft handfeel and good spinnability. It can produce short fibers and filaments of different denier and length. It is woven into fabrics and non-woven fabrics in different textile machinery. To meet the requirements of protective clothing in different fields. It has excellent flame retardant and heat resistance. The meta-aramid has a limiting oxygen index (LOI) of more than 28, so it does not continue to burn when it leaves the flame. The flame retardant properties of meta-aramid are determined by its own chemical structure and are therefore a permanent flame retardant fiber that does not reduce or lose flame retardancy due to time of use and washing. The meta-aramid has good thermal stability and can be used continuously at 205 �° C. It can maintain high strength even at temperatures above 205 �° C. The meta-aramid has a high decomposition temperature and does not melt or melt under high temperature conditions, and carbonization starts when the temperature is higher than 370 �°C. It has stable chemical properties. The meta-aramid has excellent resistance to most chemicals, and is resistant to most high-concentration inorganic acids, and has good alkali resistance at room temperature. The meta-aramid has excellent radiation resistance. For example, under the long-term illumination of ultraviolet rays and gamma rays, the intensity remains unchanged. The interfacial aramid has excellent anti-friction and chemical resistance. After 100 times of washing, the torn strength of the fabric treated with meta-aramid can still reach more than 85% of the original strength.
SINAMAY - it's made of 100% Abaca fiber. It is used as a textile or as a blending material with polyester in the production of high-end fabrics and even for handmade paper such as art media & decorative materials.
Continuous Basalt Fiber Products. Industrial use: roads, pavements, water pipes, fluids or electrical wiring. Basalt fiber will not burn but smoking of the product may occur at approximately 200 - 260 °C due to decomposition of sizing. Sizings may decompose in a fire situation and release carbon monoxide, carbon dioxide, water and minute amounts of partial sizing decomposition products
production name:Citrus Fiber specifition:Citrus Fiber.Natural citrus flavor with light unique smell Solubility:100% soluble in cold water color:Off-white or light yellow powder. benifit:It has good water retention, oil retention and swellability, which can bring a full, natural and thick taste to the product, and can replace a variety of thickeners and emulsifiers. specifition:Meat, bakery, sauces &dressings, dairy, beverage, frozen food, health & wellness
Raw skirted Alpaca and cria fiber freshly sheared and skirted. We are selling 600+ pounds of fleece and seconds. All fleece is of high quality, perfect for spinning or felting. We have 5 separate colors, white being the most prevalent.
Product name: UHMWPE fiber Fineness: 20D/30/50D/100D/200D/400D/600D/800D/1200D/1600D/2000D/2400D available Density: 0.97 g/m3 Strength: >=40 g/D Modulus: >=1400 g/D Elongation: 2.8% color: white Feature: - Low density - High strength - High energy absorption - Low dielectric constant - High electromagnetic wave transmission - Low friction, - Impact resistance Application: National defense Public security Naval vessels Aviation Ocean oil Medical treatment, gymnasium, etc
Ladies Footwear Like High Heels, Boots, Sandals..
0.75 LEA Carded Natural
0.75 LEA Carded Natural
0.75 LEA Carded Natural
6 LEA Carded Natural
6 LEA Carded Natural
TMI 90.3.3.200408 - Pillow Flow Packing Machine Application: Suitable for the solid object with regular form. Such as biscuit, bread, sweet, commodities and industrial parts and so on. The bulk cargo is put in a box and form a regular object, then to be packed. Structure function: 1) Touching controller with person-machine interface, parameter enacted quickly, high speed and high efficiency 2) Adopting the tracing technology through photoelectricity, with digital input and sealing and cutting position nicely. 3) Diagnosing the troublesome and indicating to give an alarm. 4) Constant-temperature adjusting, brainpower controlling and being suitable for all kinds of packaging materials. 5) Controlled by Double frequency conversion, the bag length can be cut with the enacting To finish by one step, saving time and saving film. 6) Simple transmission system, more reliable operation, more convenient maintenance â??Technical parameter: Film width: Max. 320 mm Bag length: 65-300mm Bag width: 30-160mm Product height: Max.45mm Film roll diameter: Max.320 mm Power specification: 220V 50/60HZ, 2.4KW Packing speed: 40-230 Bag's/min Machine size: 3770 mm*670 mm*1450 mm Weight : 500 kg
TMI 12.4.200413 Product Description Rotor spinning machine is a kind of new-type open end spinning machine with some features such as high speed, high efficiency, automatic exhausting impurities. It can spin directly various short fibers, 40mm cut fibers or 60mm cut viscose into single fine yarn from combed sliver. This is a double-side-type spinning machine based on modularised design. It applies many new technologies such as air suction spin box, semi-automatic piecing-in, closed loop control etc. Max. rotor speed can reach 110000 rpm. Thanks to application of numerous new technologies, it holds spinning and winding quality close to full automatic rotor spinning machine, and then shows better price-performance ratio. Technical Specifications The minimum and max. tex: 120-150 (5s-36s) Suitable tex: 83.2-28 (7s-21s) Cotton to be fed: 2500-5000 Rotor speed (r/min): 100000 Yarn guiding speed m/min: 40-160 Splitting roll seppd: 5500-9000 Twisting degree: 220-2250 Pneumatic moto purging volume (m3/h): 5500 Suitable fiber length (mm): less than 40 Operating height (mm): 1560 Yarn feeding bobbin: outer dia: 400x914 Head space (mm): 230 Rotor diameter (mm): 400 or 40 Head number: 192 or 240 Bobbin specs (outer diameter*height)(mm): 54x170 Take-up specs (diameter*height): 300*150 Loaded weight (kg): 3 Crossing angle: 300,330,390,420 Yarn breaking (Filament per 1000 filament per hour): less than =50 Purification efficiency: 60-80 Pressure in rotor intra cavity: greater than = 5 Mechanical stretching times: 32-220 Tension stretching times: 0.93-1.06 Total power: 64kw
TMI 13.1.200415 Product Description Rotor Frame machine is a three-shaft driven computerized type high speed suspend flyer roving frames that adopt the advanced computer numerical control technique, without cone drum structure, mechanical forming and direction transposition structures of former flyer frames. It's more simple and more reliable than former roving frames, all operations are controlled by inverter and PLC. Technical Specifications Suitable for square fiber length:60-200mm Drawing multiple :4-16 Viscosity range:10-40twist/m The scope of Article :0.3-1g/m Feeding range:5-15g/m Constant speed:the maximum mechanical speed 1200RPM Maximum process speed 900RPM Drafting system : A complete unit Chinese brand drafting system (spring weighting arm). Roller diameter(mm) : 28.5,28.5 Top roller diameter(mm) : 25,28 Drafting range : 4.2-12 Mechanical spindle speed(r/min): 1600 Twist range(twist/m) : 18.0-80 Bobbin dimensions (mm) : 45 445 Take up package dimensions (mm): 152 40
TMI 14.2.200415 Product Description Ring Spinning Frame has the features of high quality yarn, high level of automation, convenient operation and easy management . The option for the number of spindle ranges from 384 to 516 .The machine can be equipped with every kind of drafting system that is available from Chinese or European brands. This model was first entered into the market in 1989 and it is known as one of the most stable and reliable ring spinning frame by customers after modification for 20 years. Technical Specifications Spindle gauge: 70mm Lifting: 205, 180, 155 mm Ring Diameter: 45,42,38mm Number of Spindle: 384,396,408,420,432,444,456,468,480,492,504,516 Yarn count: 97.2---4.9tex (6--12Ne) Twist: 300--1600(T/m) Draft Ratio: 10-50 Spindle speed: 15000-22000 rpm Spindle drive: Single tension pulley,Z or S twist optional Spindle wharves diameter: 22,24,20.5mm Creel: One tier hanger, Four or six rows optional Main Motor (380v50Hz): 15/7KW 17/9KW 18.5/11KW 22/11KW (380v) Suction Motor (380v 59 Hz): 1.5KW (for No.of spindles below4444) 2.2KW (for No.of spindles above 456) Lift Motor: 370W Distance between Spindle from left and right side: 700 mm Headstock dimensions: Width: 640mm, length:680mm, height:1700mm Endstock Dimensions: Width:640mm, length:1300mm,height: 1768mm Total height of the machine: 2300 mm Total length of the machine: L= 2380 + (N/2-1) 70mm L: length N: where means the number of spindles
TMI 1.1.200326iii Product Description The Full automatic textile rubber cots take off machine is newly developed for take off the rubber cots from the roller bearing, It is a new generation of cots take off machine. The Full automatic textile rubber cots take off machine is mainly used in spinning mill to carry out take off the rubber cots from the roller bearing. This machine is a fully automatic machine, which greatly saves labor. It's excellent take off quality helps in improving manufacturing efficiency & saves time and cost of operation. The Full automatic textile rubber cots take off machine has an automatic feeding. It automatically takes off the rubber cots from the roller bearing & the products are of a high precision take off. Technical Specifications Feeder power: 0.35 Kw Production: 300-400 Sets / hour Air pressure: 5 Kg or more Function: fully automatic take off aluminium bushing rubber cots, double layer rubber cots onto the roller bearings.
TMI 1.1.200326i Product Description The Full automatic textile rubber cots grinding machine is new developed for grinding rubber cots, it is a new generation of cots grinding machine. The Full automatic textile rubber cots grinding machine is mainly used in a spinning mill to carry out grinding of rubber cots. This machine is a fully automated machine, which greatly saves labor, provides excellent grinding quality to improve manufacturing efficiency & save the time and cost of operation. The Full automatic textile rubber cots grinding machine has an automatic feeding. The processing of rubber cots is of a high precision grinding & end surface level off is smooth. Technical Specifications Grinding wheel motor power: 2.2 Kw Rotating motor power: 180 W Displacement motor power: 180 W Dust collection fan power: 750 W Feeder power: 0.3 Kw, 220 V Air pressure: 5 kg or more Production: about 300-360 PCS/H
