Product Brief One output line , high capacity Fully Automatically , make outside earloop welding togther with mask producing process which can save labor , once non woven raw material in unwinding part use up , the machine can automatically stop . Equipment size 4600*3100*1900mm (L*W*H) speed 60~80pcs/min voltage 220v Total power of equipment 6.5KW Equipment weight 1550Kg
This machine mainly used to process the waset textile, such as fabric, yarn, carpet etc. into fiber, according to fiber quality request, there need different cylinder qty. Opening machine: 400-500-600 Recycling machine:250 Capacity: from 150-600kg per hour as request.
this machine machine can recycle the waste clothes (second hand clothes or used cothes) directly, don't need to remove the button and zipper, output fiber widly used for filling, mattress, felt, automotive industry. Capacity: 200-800kg per hour Power: 45-103kw There have different type for refer according to processing and capacity request.
Dscription Aerogel Inaulation Blanket is one of our hot sale products.It has chosen the acupuncture fiber as substrate, and then the aerogel is compounded into the substrate. It has the thermal insulation performance and surface hydrophobicity and excellent flame retardant properties. The thermal conductivity at room temperature in 0.016 (W/m.K), is lower than the static air; The aerogel product is of high hydrophobicity; at room temperature, the water repellent rate of can be up to 99%; Excellent flame retardant performance, and fire rating has met the national A1 standard. And the temperature of the product using range is wide, Joda Aerogel fiberglass blanker could be used according to the different requirements in -200 ~ 650 DEG C for adiabatic pipe and tank, using the furnace of industrial equipment and pipeline. Specification Material:Nano Silica Aerogel Color: White Density: 180-220kg/m3 Applicable Temperature: -200 ~ +1000 Hydrophobicity: Absolute Hydrophobicity (Below 350) Thermal Conductivity: 0.012 - 0.018w/mk (At 25) Low Temperature Bending: 99% Breaking Elongation: 65% Bending Strength: 45KP Compressive Strength: 32N Advantages Optimized thermal conductivity in high temperature service Faster application, especially on large-bore piping and vessels Addresses tight, hard-to-insulate spaces with outstanding thermal efficiency Flexible blanket material won't crack, sag, or settle in high-temperature service Stands up to vibration, footfalls, and tool strikes Tough enough for reuse after removal and inspection Hydrophobic and breathable, Aerogel resists liquid water and avoids the damaging effects of wet insulation Versatile format can be fitted to any piece of piping or equipment, greatly simplifying material management Higher packing density reduces shipping and storage costs by up to 90% Company Name:HUATAO Contact Person:Frank Zong Mob/Wechat/Whatsapp:+86 19930618603 Skype:huataogroup Email: Frank:export@huataogroup.com,Mob:+86 19930618603 Annie:annie.lu@huataogroup.com,Mob:+86 18032422676 Emma:sale04@huataogroup.com,Mob:+86 13383110252 Julie:team5@huataogroup.com,Mob:+86 17731189774 Lily:team7@huataogroup.com,Mob:+86 18033762592 Rebecca:marketing@huataogroup.com,Mob:+86 18033762592 Website: www.industrial-felts.com www.huataolover.com www.geosynthetic-fabric.com sjzht.bossgoo.com
Description Textile machine needle calender felts are used in calender machine for dye precess and aims to make the cloths soft and smooth than before, used in after processing stage of textile. our endless calender felt could proess in high temperature , fabric come out soft and smooth. Specificatoin Composition: 100%Nomex Heat-resistance: 210-260 Composition: 50%Nomex(on working surface) + 50%Polyester Heat-resistance: 160-210 Composition: 100%Polyester Heat-resistance: 120-160 Density: 2200g/m2-3600g/m2 Thickness: 5mm-10mm Width: 1600mm-3600mm Advantages 1.Even thickness,smooth surface and strong tension, 2.Wide range in weight. 3.Same texture can be produced to your original sample 4.Environmental friendly and harmless to human body 5.Easily cut into different sizes. 6.Has passed ROHS,CA117,BS5852 Company Name:HUATAO Contact Person:Frank Zong Mob/Wechat/Whatsapp:+86 19930618603 Skype:huataogroup Email: Frank:export@huataogroup.com,Mob:+86 19930618603 Annie:annie.lu@huataogroup.com,Mob:+86 18032422676 Emma:sale04@huataogroup.com,Mob:+86 13383110252 Julie:team5@huataogroup.com,Mob:+86 17731189774 Lily:team7@huataogroup.com,Mob:+86 18033762592 Rebecca:marketing@huataogroup.com,Mob:+86 18033762592 Website: www.industrial-felts.com www.huataolover.com www.geosynthetic-fabric.com sjzht.bossgoo.com
Description Sanforizing machines are used in shrinkage bottom wait and denim finishing plants. Manufactured by our special heat-resistant Nomex, Polyester and Wool, we can produce the felts for different models of sanforizing machines. Speocification Material: Nomex, Polyester, Wool Density: 2000g/m2-4000g/m2 Thickness: 6mm-10mm Application: Needle felt for sanforizing are used on the following machines : Monforts, Morrison, Muzzi, Sperotto Rimar, Bisio, Cibitex, Mather & Platt, Farmer & Norton, Monti, Tepa, Swastik, Dhall, Swastik, Thakore, Yamuna, Ronson, I Kuang, Poong Kwang, etc. Company Name:HUATAO Contact Person:Frank Zong Mob/Wechat/Whatsapp:+86 19930618603 Skype:huataogroup Email: Frank:export@huataogroup.com,Mob:+86 19930618603 Annie:annie.lu@huataogroup.com,Mob:+86 18032422676 Emma:sale04@huataogroup.com,Mob:+86 13383110252 Julie:team5@huataogroup.com,Mob:+86 17731189774 Lily:team7@huataogroup.com,Mob:+86 18033762592 Rebecca:marketing@huataogroup.com,Mob:+86 18033762592 Website: www.industrial-felts.com www.huataolover.com www.geosynthetic-fabric.com sjzht.bossgoo.com
we can offer belowing common used guide unit L-9-0-0,KL-28-92-0 L-28-0-0,KL-28-93-49 L-32-0-0,KL-32-93-49 L-20-66-0,ML-32-93-0 L-20-3-41,ML-28-93H-0 L-22-0-6,ML-36-92P-0 L-18-73-49,ML-36-92H-0 L-16-93-49,ML-6-100-49 L-24-93-49,L-22-66-6 muler L-14-93-49,3-70-4K 28E DL-9-17-9,3-70-20K 28E DL-14-17-9,3-70-4K 14E Dl-24-16-9,3-70-4K 16E L-28-66-0,3-70-4K 12E L-28-66-49,3-27-20 28E L-28-0-49,3-58-4 28E L-28-93-0,3-70-20K 32E L-28-93-49, KL-22-93-49/3 L-6-49-44, KL-22-93-49/2 L-24/2-42-54, KL-22-93-49/1 L-24/2-84-63, KL-28-66-0/2 L-24-0-49, both metal and plastic. annually export quantity is more than1,000,000pcs Quality: 6 months will be warranteed if the proper yarn and machine is matched If qty is huge,we will discount properly. Yours kind inquiry will be highly appreciated.
we can offer different kinds of beam,used in the warper machine both for common yarn and elastic yarn spec is 14"x14"4.33 17"x14"5.90 21"x21"7.87 21"x21"(A)11.81 21"x42"10.24 30"x21"7.87 30"x21"(A)11.81 30"x21"(B)14.17 30"x42"11.81 40"x21"14.17 40"x21"(A)11.81 40"x42"14.17 40"x42"(A)11.81 40"x65"14.17 40"x65"((A)11.81 50"x42"15.75 50"x42"(A)14.17 50"x65"15.75 50"x65"(A)14.17 warp knitting spare part karl maye liba bobbin beam 50"x65
standard plastic box ,each box put 500pcs Port Shanghai Compound Needle 40.50G102 Compound Needle 40.56G102 Compound Needle 51.50G104 Compound Needle 57.50G101 Compound Needle 57.55G101 Compound Needle 51.50G11 Compound Needle 51.50G8 Compound Needle 37.41G102 Compound Needle 37.45G104 Compound Needle 41.50G104 Compound Needle 43.41G103 Compound Needle 43.45G104 Compound Needle 43.45G105 Origin: China & Germany Quality: 6 months will be warranteed if the proper yarn and machine is matched Package: Standard Plastic box and cartoon box
DUBIED TRANSNIT KNITTING MACHINES MAKE DUBBIED SWITERZLAND 1) 14 DIA X 1 SET GUAGE 14, FEEDER 16F, NEEDLE 600 2) 16 DIA X 3 SETS GUAGE 14, FEEDER 16F, NEEDLE 684 3) 18 DIA X 3 SETS GUAGE 14, FEEDER 16F, NEEDLE 768 TOTAL NUMBER OF SETS: 7 CONDITION: EXCELLENT AND RUNNING
HOWA JAPAN BRAND VELVET RAPIER LOOM MAKE: HOWA JAPAN Y.O.M: 1995 MODEL: H410-A AND H411-S WIDTH: 140CM (4 PILE, 4 GOUND, 4 SEL ) SHEDDING: AICHI DOBBY X 31 SETS SHEDDING: ISTAUBLY DOBBY X 20 SETS CONIDTION: EXCELLENT RUNNING TOTAL NUMBER OF SETS: 51 SET PHOTOS AS ATTACHED PRICES ON REQUEST If you are Interested, Inform us Thanks and Best personel regards JAFRI +821029184243
Top-mounted positive shedding device NP4421 is characterized by more lifting units, large shedding amount, frame box of integral structure, strong rigidity, wide weaving patterns. Itâ??s especially suitable for double-warp looms that produce wide and heavy home textiles. Technical Parameters Reed Space: 1900mm~3600mm Max. RPM: 600rpm (4/1 weave, 1900 mmï¼? Weft picks: 12 picks Pitch: 12mm Max. Lifting Units: 16 pcs Heddle: 330mm Shedding Amount: 56mm~130mm
Top-mounted high-speed positive cam shedding device NPA408C is suitable for all types of air-jet looms. It can weave various fabric types that within 10 weft picks. The design of high-precision conjugated cams is incorporated into this device. The conjugated cams control the heald frames to move precisely according to given motion law through connecting parts, and keep them moving up and down smoothly even when loom runs at high speed. The cam box is fully enclosed and lubricated via oil bath inside. Double-side sealed bearings are used for all the connecting parts outside of frame box. Lever arm shaft and lever arm are joint with needle bearing, which is lubricated with grease to guarantee the service life. Technical Parameters Reed Space: 1400mm~4600mm Weft picks: 10picks Max. Lifting Units: 10 pcs Heddle: 280mm Shedding Amount: 55mm~126mm
Electronic jacquard shedding device is applied to rapier, water-jet and air-jet looms. Its driven by oil-bath conjugated cam and concentric shaft. Different stoppage angles can be selected to create clear opening for meeting various weaving needs of multifarious fabrics the jacquard machines features strong bearing capacity, components of long service life, easy and convenient operation, low consumption and less maintenance cost. Np6016 features longitudinal arrangement of 16 lines of components. With the advantages of compact structure, light weight and robustness, the device can meet the needs of high speed running. Np6016 is equipped with electrical self-check function. Its capable of weaving tie, trademarks, towels, clothing fabric and lining. Technical parameters: Hooks amountï 2688-5376 Max rpmï 650rpm (based on process of fabric weave) Shedding amount 46mm~130mm Full load of hook: 2000kg Storage capacityï 4g Screen sizeï 7 inches
General details: Ul-e series high-precision laser cutting machine is a compact model with max. Processing area 1300x700mm, equipped with the digital control, modular mechanics and software specialized on the cutting of handicraft, electronic and advertising model. Itâ??s suitable for prototype and light or on-demand production, also be best choice for educational purpose and your starting business. Features: 1. Engraving the printed images and drawing , engraving the raster pictures, the engraving accuracy can be adjustable. 2. The daily production can be recorded by the processing time and frequency. 3. Give the user best usability & reliability, higher acceleration and speed, plus high precision and accuracy. Applicable materials: Textiles&fabrics, wood&plywood, rubber, plastic, acrylic, films&foils, foam, paper, packing box, leather, arts&crafts, electronics parts, non-metal materials, and bamboo products, touch screens etc. Above includes materials commonly processed by laser, for questions on other materials please contact an applications specialist.Â??â??
General Details: UL-VC series high-precision vision laser cutting machine is a model with CCD camera positioning and analysis system, with specialist software could positions the laser beam according to fiducial marks and automatically recognize the contour, then accurately position for cutting without any additional hand-work . Plus advance function for compensation of distortion such as shrinkage, stretching and twists in the material, as result you will get faster processing speed together with high process reliability and short machine setup times. The Max. processing area up to 3200x8000mm, really well-prepared for all applications in the fields of laser cutting for large size materials, equipped with the DSP digital control, rigid mechanics and software specialized on the cutting of textile and fabrics. Itâ??s suitable for continues production with automation workflow, high performance, productivity, quality and reliability add up to a lower cost of owner-ship , thatâ??s means cost saving for your business. Features: 1. Laser cutting machine design with UniSmartCut controller which is based on advanced DSP technology for improving the performance, dedicated speed controller software design ensures fast and stable moving, plus automatic laser compensation technology. 2. Suitable for end-user who has a high requirements on the precision of cutting, it is widely used for most of popular application such as garment , leather, toy, computer embroidery, handcraft, advertisement, decoration, building upholster, package materials, digital printing, paper products, etc. 3. CCD Camera positioning system, captures marks via CCD camera and automatically recognize the printed design contour or curves, automatic camera detection enables printed materials to be cut out precisely along the printed outline. Even copying tolerances in the printed format can be compensated by software control. 4. Fast continues curve cutting is possible, due to the powerful data processing capability of the high speed DSP technology and precision mechanical system. During high-speed operation, cutting either straight lines or curves without distortion. 5. Protection system: enclosure protection, emergency stop switch, leakage protection. 6. Give the user best usability&reliability, higher acceleration and speed, plus high precision and accuracy. As example for general sport wear, daily production can be 500-800 sets. Applicable Materials: Textiles&Fabrics, Acrylic, Films&Foils, Foam, Paper, Packaging box, Leather, and digital printing materials, etc. Above includes materials commonly processed by laser, for questions on other materials please contact an applications specialist.â??â??
Automatic weighing and velvet filling machine with good performance Model�SCR-1P-3G This device is an electromechanical product, unilateral charge pile structure is composed of touch panel and PLC control. The production of down clothing and other products with the filling equipment, can effectively improve the productively, reduce labor strength, improve the production environment of factory. Basic parameter Model SCR-1P-3G Power supply 220V Motor 1.5KW Filling mouse 1 Number of weighing scales 3 L*W*H dimensions(m) 2.5*1.4*1.9 Eiderdown category Dry above 70 Speed of equipment 1-8s/time Store all quantity 3kg/time Fill up quantity every time Small:0.1-7g ; big:0.1-25g Precision grade Within±0.05g,the biggest no more than±0.1g Weighing error Within±0.2g,the biggest no more than±0.3g N.W/G.W 400kg/600kg Gas storage tank Not less than 0.3m³ Size: The main box (m):1.5*0.7*2 Weighing box (m):1.5*0.5*0.9 Weighing velvet box (m):1*0.8*0.6 Filling machine features: 1. Three scale alternating out of velvet. 2. Down filling with air pressure filling method, does not damage down, can keep down the original soft and elastic and feel. 3. Quantitative and accurate, can choose and set the range the error, effective the contradictory relationship between the filling weight and the filling efficiency. 4. The operation is simple, save labor, single head only need one person operation. 5. Down in the full closure of the equipment cycle, to ensure the production site clean and tidy environment. 6. Good stability the key components of imported components. 7. High degree of automation, the whole machine adopts PLC automatic control. 8. High production efficiency, each charge time 1-8s (depend on the specific weight of the charge). Pressure requirements of the charging machine: 1. gas supply: above 0.5m³ /min 2. air pressure: not less than 0.58mpa Filling room requirements: Minimum transport channel (m):1*2 Minimum place (m):3*2*2 Recommended place (m):4*2.5*2 This is the finished product. The important controlling buttons. Lack of air pressure, automatic alarm. The touch screen which can save up to 100 data enable both ingle quantity filling and multiple quantity filling. The paddle. Finish a whole intact filling with one paddle. Filling nozzle with good quality.
Capacity:300-350kg/h Porcupine roller diameter:600mm Weight:1000kg Width:1000mm Power:26kw Description:pneumatic brake system and lubricating system , direct driving system with the gear motor without chains driving system and fixed carbon dioxide fire extinguished installation Reduce the damaging of the fiber, in order to keep the fiber length make reasonable and efficien. The porcupine roller (cylinder with taper-pin)shall be changed depend on the raw material and customer requirements. Raw material:textile waste
Four roller textile recycling machine Output::150-180 Barbed rollers diameter:400mm Revolving speed of rollers: first 1400/others 1500 Fan power: 1.1 Motor power: first 11kw/other 7.5kw Dimension: 7650/5100/3850/2550*1720*1160mm Weight: 4200/2800/2100/1400kg Description:ideal machine to replace the nsx-qt series.
SD-822series water jet loo is a orgic combination of all advanced designs in SD-622 and SD-408 series; thus it is more stable than SD-622series, d more concise than SD408 series. Reed With: 150-380cm Max Speed: 1000RPM 40KGS
