Machine model - premium Machine size - 27 l x 28 b x 41 h Machine weight approx 155 kgs. Power supply 1 phase -230 v / 3 phase 415 v- ac -50 hz / Electrical motor 1 hp -1 phase / 3 phase Capacity 20 kg per day (depend on stem quality and working speed of operator) Rotor blades - harden alloy steel ( 8 nos.) Machine guard & tray s s material. Water strainer - s s material
We are manufacturer of banana fiber raw fiber and smooth fiber are also available which are eco friendly more...Type: raw fiber. Material: banana stem. Diameter: 0.5mm. Length: approximately 1 mete. Color: natural brown and cr..Pure, clean, anti-fungal, dried payment terms:-tt/lc minimum order:-500kg mex.Order:-1-2 ton
Application Mainly suitable for Clothing, Making Shoes, PVC bags, Raincoat and rain gear,Leather handbags,Stationery stickers,Leather embossing,Footwear trademark,Auto cushion,Cloth embossing and any PVC or 30% PVC contained plastic fusing. Features: 1. Frequency stability: High frequency machine according to the International Committee on radio interference (CISPR) "the provisions of the industrial band 27.12/40.68MHZ, and the design of frequency stabilizer and frequency magnetic leakage suppressor, minimal interferes with the outside equipment. Exceptionally high output: The high frequency machine adopts the low loss coaxial resonator, the output waveform is good, the quality factor is very high, the output is very strong, and the welding is fast. 2. Oscillating current stop setting: The regulator of output power is simple and convenient. According to the size and thickness of the product, the required oscillation current is set to control the degree of welding and ensure the uniformity of the welding quality. 3. Spark suppression: High frequency machine with high sensitivity spark suppression circuit, can accurately detect spark current imbalance, to produce sparks quickly cut off the oscillation circuit of spark suppression, making mould, raw materials and products to minimize the damage degree. 4. Safeguard: The high frequency machine is equipped with overvoltage and overcurrent protection device. It can automatically cut off the high voltage to protect the oscillation tube and rectifier when the work is abnormal, and avoid the frequency drift caused by improper operation. Dongguan yongjia machinery is a factory ,and specializing in high frequency welding machine more than 10 years.All machine is made by our self,quality assurance ,accepted customized
Application Leather label embossing machine Mainly suitable for Clothing, Making Shoes, PVC bags, Raincoat and rain gear,Leather handbags,Stationery stickers,Leather embossing,Footwear trademark,Auto cushion,Cloth embossing and any PVC or 30% PVC contained plastic fusing. Features: 1. Frequency stability: High frequency machine according to the International Committee on radio interference (CISPR) "the provisions of the industrial band 27.12/40.68MHZ, and the design of frequency stabilizer and frequency magnetic leakage suppressor, minimal interferes with the outside equipment. Exceptionally high output: The high frequency machine adopts the low loss coaxial resonator, the output waveform is good, the quality factor is very high, the output is very strong, and the welding is fast. 2. Oscillating current stop setting: The regulator of output power is simple and convenient. According to the size and thickness of the product, the required oscillation current is set to control the degree of welding and ensure the uniformity of the welding quality. 3. Spark suppression: High frequency machine with high sensitivity spark suppression circuit, can accurately detect spark current imbalance, to produce sparks quickly cut off the oscillation circuit of spark suppression, making mould, raw materials and products to minimize the damage degree. 4. Safeguard: The high frequency machine is equipped with overvoltage and overcurrent protection device. It can automatically cut off the high voltage to protect the oscillation tube and rectifier when the work is abnormal, and avoid the frequency drift caused by improper operation. Dongguan yongjia machinery is a factory ,and specializing in high frequency welding machine more than 10 years.All machine is made by our self,quality assurance ,accepted customized
Characteristics: - PLC digital control system for industrial use - Electronic length fixing, and accurate counting of winding size - Lower noise level under the condition of high speed - Large-package winding presents products without pieces - Multidigit electronic detection device for broken yarn - Degree of twisting can be controlled via a computer
1: Gearbox adopts oil lubricant design make maintain easy, and abrasion uneasy. 2: Crease free and easy folded with tubular fabric open width subsystem 3: High quality of cylinder with inserted trick walls and GROZ-BECKERT knitting needles used reduce wear 4:The no-crease open-width system: The machine adopts the latest winder system and is equipped with the roller shifting device to ensure the uniform stitch density of fabric. The operation is easy and convenient. It effectively removes creases in cloth caused by common winders, and makes it suitable for double air layer fabric material of chemical fibers and cotton, such as the high quality nylon, polyester and filament. 5: Combining the characteristics of double jersey and crease-free for cloths from knitting machines. High fabric output, equipped with a large diameter cylinder and high-speed motor; automatic cutting system to ensure unnecessary fabric loss. 6:Equipped with 2 tracks dial cams and 4 tracks cylinder cams, just change the camsâ?? arrangement, then you can change the fabric patterns to meeting the market need. 7: The material of cams is made by special imported heating disposal and designed by CAD/CAM to ensure the needle can running smoothly to prolong the needle life.
1: Main gear driving equipped with German ball bearings/wearing plate 2: Central Stitch Control Devices: Adjust the stitch length and GSM only by using hex wrench adjusting tuning knob 3: Cam box: Computer-milled grooves and numerical adjustment to provide precision. Use the single bevel screw to fix the cam holder to ensure the accurate position. 4: Cams made in house from Japanese alloy steel, Computer engraving, vacuum heat treatment, HRC confirms to standard. 5: Touch type control panel with high precision. Easy to be replaced and durable even in long time operation 6: Strong interchangeable cam and cam box satisfy different fabric structure. 7: Ease of maintenance, installed & changed by special designed system 8: knitting yarns used: viscose rayon, cotton, polyester, sensitive yarn etc. 9: Single Jersey Circular Knitting Machine Spec:
The open width circular machine use the cylinder four-track cam design. various kinds of single jerseys with high quality and distinct thicknesses could be knitted through arranging its cams and knitting needles in different ways. By equipping open width fabric taken down device, the fabric can be cutted automatically on the machines. It makes sure the fabric to be more smooth and completely not have crease, wrinkles. Make sure the fabric can be used without waste, which can reduce the cost and enhance the profit. The fabric taken down system equip drum speed transfer device, which makes the fabric in even and stable density. it's easy control and save time. The cloth collecting stick can roll up cloth automatically, so as to process cloth in diverse sizes, even those which are too small to strain. The cloth-cutting machine is equipped with a roller speed adjustment device that guarantees a uniform and stable knitting tightness to the fabric.
1. The Jacquard machine selects needle in cylinder by using 3 ways actuator, which can make knitting stitch, tuck stitch, and miss stitch. Any complex fabric structure and patterns are converted into control procedures through the computer system, and save into disk input control system, saving the time of pattern changing. 2. Computer system reading patterns is easy to operate, quick and efficient. 3. Special single jersey jacquard fabric can be knitted and enable knitting factory to knit different pattern to enhance fabric value. 4. 3 Technology Electronic Needle Selection System: Its under needle cylinder is equipped with the 3 technology electronic needle selection plectrum. Through the computer control system, the operator can control looping, doubling stitch or loose stitch according to different needs. Adopt the advance Three - Way Technique computerized needle select system on cylinder, simply and quickly changing the knitting function - knit, tuck, and miss pattern at your ease
This machine is applicable to extending and heat setting of fabrics, such as pure cotton which gram per square meter is 50-400, polyester cotton and other blended fabrics. Equipped with mangle, it can also carry out other treatments like squeezing and resin padding. Technical specification: Machine width: 1800-3600mm Machine speed: 20-120m/min Heat source:thermal oil, gas, electricity or steam. Fabric held by: pin,clip or pin/clip export standard
This textile waste recycling machine uses high speed centrifugal force when operating to get rid of impurities in cotton and loosen the cotton at the same time. This machine is mainly used to process all kinds of lint cotton, cloth clips, cloth corner, waste yarn, etc. 1. Overall dimensions: 4420mm*1500mm*1150mm 2. Output: 100-120kg/h 3. Capacity of removing impurities: 6%-10% 4. Cylinder diameter: 400mm 5. Cylinder rotation speed: 1st roller:1420rpm/min 2nd roller and 3rd roller: 1800rpm/min 6. Chain: t=19.5mm 7. Motor power: 11kw+7.5kw+5.5kw
This textile waste machine is mainly used to process all kinds of waste cotton, clips, leftover, waste yarn, thread, flock and flax. This machine is SBT630 opening machine combined with model 1390 cotton recycling machine, which makes better fiber. Overall dimensions: 12000mm*2300mm*1600mm Weight: 14 tons Output: 200-300kg/h Motor power: 30kw+22kw for opening machine 15kw+11kw+7.5kw+7.5kw+7.5kw+7.5kw
Vertical and automatic hydraulic baling machine for raw cotton This baling machine is designed as per our customers' requirements, having the features of high automation, labor cost and time saving. It is mainly used in the package of raw cotton, waste cotton in the cotton mill and ginning plant. It is also can be used for packing some scraps and other soft goods. This machine is easy to operate with automatically hydraulic packing device. Overall dimensions:1440mm*690mm*4200mm Machine weight: 2600kg Packing size: 1000mm*500mm*800mm( can be changed) Packing weight: 60-130 kg Rated working pressure: 12Mpa Packing pressure: 10Mpa Motor power: 7.5kw The stroke of oil cylinder: 1400mm
This machine is mainly used in pressing finished cotton after processing by cotton waste recycling machine. It also can be used in pressing cotton craps, clips, threads, car interior material, flax and papers. Overall dimensions: 1150mm*850mm*2250mm Weight :750kg Baling size: 1000mm*500mm*1000mm Baling weight: 80-120kg Motor power: 4kw-5.5kw
This textile waste recycling machine uses high-speed centrifugal force when operating to get rid of impurities in cotton and at the same time loosen the lint cotton. This machine is mainly to process all kinds of lint cotton, old quilt, cotton clips, landing cotton and flock etc. Main technical parameters: Output:100-120kg/h Capacity of removing impurities:6%-10% Diameter of cylinder:250mm Rotation speed of cylinder: 1900 rpm/min 5 .Diameter of pressure cotton roll: 1400mm*985mm 6. Fan: 1.1kw 7. Rotation speed of fan: 2900rpm/min 8 chain: t=19.5mm 9. Model of taker-in: 5610*1.09*6 teeth/inch Bearing of taker-in: 111308 dust cage double chain wheel:205 11. Motor equipped: 7.5kw and 5.5kw four grade 12. Overall dimensions: Length: 3380mm width: 1500mm height: 1150mm
This textile waste recycling machine uses high-speed centrifugal force when operating to get rid of impurities in cotton and at the same time loosen the lint cotton. This machine is mainly to process all kinds of lint cotton, old quilt, cotton clips, landing cotton and flock etc.
This textile waste recycling machine uses high-speed centrifugal force when operating to get rid of impurities in cotton and at the same time loosen the lint cotton. This machine is mainly to process all kinds of lint cotton, old quilt, cotton clips, landing cotton and flock etc. Dimensions:7540mm*1500mm*1150mm Output:100-120kg/h Cylinder diameter: 600mm for opener, 250mm for recycling machine Motor power: 18.5kw+7.5kw+5.5kw+5.5kw+5.5kw+4kw+4kw
Vertical and automatic hydraulic baling machine for raw cotton This baling machine is designed as per our customers' requirements, having the features of high automation, labor cost and time saving. It is mainly used in the package of raw cotton, waste cotton in the cotton mill and ginning plant. It is also can be used for packing some scraps and other soft goods. This machine is easy to operate with automatically hydraulic packing device. Overall dimensions:1440mm*690mm*4200mm Machine weight: 2600kg Packing size: 1000mm*500mm*800mm( can be changed) Packing weight: 60-130 kg Rated working pressure: 12Mpa Packing pressure: 10Mpa Motor power: 7.5kw The stroke of oil cylinder: 1400mm
Product Detail (1) Adopts Germany "Heusch" shears and blade.  (2) Adopts metal detectors, accurate measurement for metals in the cloth and protection the service life of shears.  (3) Deviation rectifying device is equipped in front of the machine, saving labour force and time and increasing efficiency.  (4) Hydraulic transmission, more stable , high-speed operation.  (5) The innovation of air suction technology, can drain shearing wool clean and fast.
Working width: 2000mm  2200mm  2500mm   Diameter of polishing roller: Ï?370mm Heating type: electrothermal tube Temperature polishing of roller: 5~250°C±5°C Delivery speed: 5~16m/min,inverters to adjust speed. Rotary speed of front polishing roller: 915r/min Rotary speed of rear polishing roller: 880r/min Heating power: 2x49.2KW(2000mm)2x52.2KW(2200mm)   Total power: 121.4KW(2000mm) 127.4KW(2200mm) 137.9KW(2500mm)
