This line, which designed and manufactured based on the advanced experience, is the comprehensive characteristic of the fiber peocessing machines at home and abroad.To be certificated, this line basically mmet the requirements of high quality, high output, low consumption, and have advantages such as compact model, easy operation, safety, etc.
The line designed to use the tearing cylinder fast-moving mechanical centrifugal force to exclude impurities from cotton material and tear material, compared to the trodictional processing technology of fiber tearing, and it keeps the fiber length ang less cotton knots.The line is the ideal type to process the old quilter cornor, waste yarn, cloth, linen and other textile waste material.
It is used to open the yarn waste, fabric waste, help to loosen the fiber of the fabric waste, yarn waste etc. It can help to protect the fiber length of the regenerated cotton on the highest level .Same time, reduce the damage of the wire of qt machine series and increase the working efficiency of qt machine series. It includes waste removal system, so that raw material which not well processed will be sent back automatically by the waste removal system.
An electronic jacquard machine is used for jacquard weaving. it is suitable for any loom like handloom, shuttle loom, rapier loom, waterjet loom, airjet loom, etc. It has a hook range from 448 to 5376.
An electronic jacquard machine is used for jacquard weaving. it is suitable for any loom like handloom, shuttle loom, rapier loom, waterjet loom, airjet loom, etc. It has a hook range from 448 to 5376.
An electronic jacquard machine is used for jacquard weaving. it is suitable for any loom like handloom, shuttle loom, rapier loom, waterjet loom, airjet loom, etc. It has a hook range from 448 to 5376.
An electronic jacquard machine is used for jacquard weaving. it is suitable for any loom like handloom, shuttle loom, rapier loom, waterjet loom, airjet loom, etc. It has a hook range from 448 to 5376.
MODEL : BKK-YKZ-ZH SIZE: 7000 2700 2000MM AC INPUT : 220V 2N PE POWER : 19KW AIR SUPPLY : 0.6 DATE OF PRODUCTION : 2020 NET WEIGHT : 1200 KG FULL- LOAD CURRENT : 50A FREQUENCY : 50Hz
WE HAVE FACE MASK MACHINE IN UAE UMM AL QUWAIN
FACE MASK MACHINE - 10 NUMBERS X 10000 AED = 100,000
N95 MACHINE - 2 NUMBER X 15000 AED = 30,000
Brief introduction
By softness value of the test material and objective evaluation of its feeling (touch) performance for softness test fabrics, textiles, non-woven, sanitary paper, leather and other sheet-like soft material.
At the same time, the use of different accessories, you can also test a sample of the elastic / viscoelastic / plasticity, bursting, compressibility, thickness and basis weight and other performance indicators
Product description?
The new type of concrete works softness measuring method is as follows: the main components of the instruments are a rotor, a vibration sensor and other sensors used to collect additional data and control instrument functions.
For the measurement, the sample rests on the rotor, when the rotor starts to rotate to reach the final position.
Mutual contact between the rotor and the sample so that the sample vibrate. After the vibration sensor receives the vibration signal, which is transmitted to the analysis component.
Analysis component prepared good data transfer to the computer. Then, through a complex computer calculations of these data are processed.
Use a complex formula, the parameters measured by synchronizing further parameters and customer pre-entered (the maximum you can use 68 different parameters) to calculate the value of soft.
?technical data
Software: friendly interface, simple operation. Test data can be stored for a long, always call data storage software, data were compared with the current test.
Sample size: f112.8 mm
Measurement: smoothness / roughness, softness, stiffness, feel value (hf)
Measuring pressure: 100mn, 600mn
Instrument size: 440x190x470 mm (h x w x d)
Weight: 19 kg
Power supply: 115-230 vac, 50/60 hz
Ceramic Plunger Kit textile machinery parts for Water Jet Loom
Piston Material: 99 porcelain and stainless steel combination.
Installation and precautions: Since ceramic products are easy to be broken, special hexagonal wrench tools must be used during installation, so as to make multiple points on the outer circle of the column plug bear uniform force, so that the ceramics are not easy to be broken. The water quality must also be treated by a regular system to facilitate the service life of the plunger.
Ceramic plunger features:
1. The ceramic piston kit is made of high-performance technical ceramic materials, which have high hardness, wear resistance, high temperature resistance, corrosion resistance and other properties. Ensure reliable material performance.
2. The microporous structure obtained by the unique processing method on the ceramic plunger working face has the self-lubricating effect, which changes the poor sliding friction or jamming of the traditional plunger pump.
3. The inner cavity surface adopts fluid structure, and the ceramics have no dead corners and grooves. The internal cavity surface - plunger surface is processed to the mirror surface by using an advanced high-precision internal and external grinder, and the external surface is vibration polished for easy cleaning and disinfection.
4. The pump body structure is finely sealed with the product structure to facilitate disassembly.
5. The ceramic plunger kit has been tested for corrosion resistance, acid and alkalinity resistance, and its indicators have reached the level of similar products abroad.
Water jet loom Mechanical take up gear box Textile machine parts,
Take-up mechanism gearbox for power looms,
Take up assembly case, textile machinery spare parts weaving machine gear transmission case.
Eastsong is leading manufacturer of textile machinery spare parts and weaving looms, incuding air jet, water jet, rapier, towel making and jacquard loom.
The fiber laser cutting machine AKJ1530F1 you see on this page is a low-cost metal laser cutting machine that can range from $13500 to $36500. Here you can choose 1000W, 1500W, 2000W metal laser cutter, it can cut 6-16mm thick carbon steel plate and 3-8mm thick stainless steel plate. Ideal for small businesses, home stores, beginners, hobbyists and schooling.
Our company provide professional circular loom accessories, disk winding accessories and high speed winding accessories.
Testing means complete, advanced technology, sophisticated equipment, a variety of products.
6488 Textile Machinery Equipments Suppliers
Short on time? Let Textile Machinery Equipments sellers contact you.
