Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Felt pads series products include: a. PBO+Kevlar pads Material: PBO+Kevlar Temperature resistantce: Continual 550, peaking at 650 Thickness:2-12mm b. Kevlar pads Material: Kevlar Temperature resistantce: Continual 480, peaking at 550 Thickness:2-12mm c. Nomex pads Material: Nomex Temperature resistantce: Continual 280, peaking at 370 Thickness:2-12mm d. Polyester pads Material: Polyester Temperature resistantce: Continual 180, peaking at 260 Thickness:2-12mm Contact informationï¼? Emailï¼?sales@lnshengyuan.cn Mob/Whatsappï¼?+8615140230656
The Best Replacement of Traditional Woven Belt Shengyuan high-speed needle punched corrugated cardboard conveyor belt/Overpass traction belt has advantages as below: A. High speed, high wear resistance(more than 350m/min) B. High belt surface flatness, good elasticity, is more beneficial to improve the quality of cardboard. C. Water absorption and dehumidification performance are better than the similar product in the current domestic and foreign markets. D. Normal service life is more than 40 million extension meters. E. There is no significant geometry change of the belt during the whole production process. THE TESTINGLAB OF CHINA PACKING RESEARCH&TEST CENTER No. 2006-1T-005 No. Test items Unit Standard requirements Test results Conclusion 1 Performance / Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Flat surface Uniform color Warp and weft lines are well textured No hard sundries,defects such as voids,cracks,stains,etc. Straight edge No obvious warping and serrated edges Qualified 2 Size deviation(width) mm ±10 -3 Qualified 3 Size deviation(thickness) mm ±0.5 0.2~0.5 Qualified 4 Mass deviation per unit area % ±3.0 2.3 Qualified 5 Tensile strength(warp-wise) KN/40mm â?¥8.5 11.1 Qualified 6 Tensile strength(width-wise) KN/40mm â?¥4.0 6.1 Qualified 7 Thermostability(warp-wise stretch) % -1.5~0.5 0.5 Qualified 8 Thermostability(width-wise stretch) % â?¤2.0 1.7 Qualified 9 Warp-wise dynamic friction coefficient / â?¥0.32 0.38 Qualified 10 permeability cm³/ (cm³*min*kpa) â?¥0.9*10³ 0.95*10³ Qualified NOTE: Sample thickness: 10mm The data in the table shows that all test indexes of Shengyuan card needle puncture zone are higher than the national standard. The sample is taken with a length of 20 mm and a width of 60 mm at a high temperature of 200 ºC with a tension of 0.72KN for 10 minutes to test the results. It is proved that the belt keeps the geometric dimension unchanged during normal operation.
Liaoning Shengyuan Industrial Co.,Ltd professional supply felt products for aluminum profile industry. Products include: A. Endless transfer belts B. Roller covers C. Felt pads D. Spacer bar covers E. Timing belt with felt covers F. Woven high temperature belts Felt pads series products include: a. PBO+Kevlar pads Material: PBO+Kevlar Temperature resistantce: Continual 550, peaking at 650 Thickness:2-12mm b. Kevlar pads Material: Kevlar Temperature resistantce: Continual 480, peaking at 550 Thickness:2-12mm c. Nomex pads Material: Nomex Temperature resistantce: Continual 280, peaking at 370 Thickness:2-12mm d. Polyester pads Material: Polyester Temperature resistantce: Continual 180, peaking at 260 Thickness:2-12mm
Place of Origin: Guangdong, China (Mainland) Brand Name: Sunyo Model Number: SY-PETG-001 Material: PETG Thickness: 0.8mm Size: 1220*2440mm Color: White Feature: anti scratch Density: 1.33g/cm^3 Surface: one side high glossy, one side matte Application: For Kitchen cabinet panel Environment: Eco-friendly Size: 1220x2440mm
Product Feature Waterproof Breathable PU mattress cover/mattress protector: : 1)Waterproof, protect bed from stain,water. 2) breathable, strong moisture absorbability and penetrability
Description Textile machine needle calender felts are used in calender machine for dye precess and aims to make the cloths soft and smooth than before, used in after processing stage of textile. our endless calender felt could proess in high temperature , fabric come out soft and smooth. Specificatoin Composition: 100%Nomex Heat-resistance: 210-260 Composition: 50%Nomex(on working surface) + 50%Polyester Heat-resistance: 160-210 Composition: 100%Polyester Heat-resistance: 120-160 Density: 2200g/m2-3600g/m2 Thickness: 5mm-10mm Width: 1600mm-3600mm Advantages 1.Even thickness,smooth surface and strong tension, 2.Wide range in weight. 3.Same texture can be produced to your original sample 4.Environmental friendly and harmless to human body 5.Easily cut into different sizes. 6.Has passed ROHS,CA117,BS5852
Description Sanforizing machines are used in shrinkage bottom wait and denim finishing plants. Manufactured by our special heat-resistant Nomex, Polyester and Wool, we can produce the felts for different models of sanforizing machines. Speocification Material: Nomex, Polyester, Wool Density: 2000g/m2-4000g/m2 Thickness: 6mm-10mm Application: Needle felt for sanforizing are used on the following machines : Monforts, Morrison, Muzzi, Sperotto Rimar, Bisio, Cibitex, Mather & Platt, Farmer & Norton, Monti, Tepa, Swastik, Dhall, Swastik, Thakore, Yamuna, Ronson, I Kuang, Poong Kwang, etc.
Description: Needle Sanforizing Felts are used on the palmer unit of the Sanforizing Machines or compressive shrinking rang (Zero-Zero machine). The Endless Needled Felts (Felt Blanket) is used in Finishing, Ironing, Lustering, Softening of the fabrics. Sanforizing machine conveyor belt are used in Shrinking bottom wait and denim finishing plants. Made by blending our special hydrolysis resistant polyester fibers with acrylic, wool and Heat resistant fibers. Specification: Material 100%polyester, nomex mix polyester Thickness 6-12mm Density 2000gr/ã?¡ - 4000gr/ã?¡ Working temperature 130°C - 220°C Packing PP Woven Bags With Water Proofing Delivery time 5-15 working days upon receipt of payment Payment Terms T/T Application: Needle felt for sanforizing are used on the following machines : Monforts, Morrison, Muzzi, Sperotto Rimar, Bisio, Cibitex, Mather & Platt, Farmer & Norton, Monti, Tepa, Swastik, Dhall, Swastik, Thakore, Yamuna, Ronson, I Kuang, Poong Kwang, etc.
Chest Wader Pants Custom Attributes 1. Colour: customized/optional 2.Feature: Adjustable Belt/100% water proof/anti-slip boots 3.OEM: Yes 4.sample: Available 5. Gender: Unisex 6. Logo: Customized 7.Usage: Hunting, Forest, Fishing, Offshore work, Chemical industry,or other usages 8. Custom size: accept 9. Delivery date: 15days 10. Price: Competitive Characters 1.Not easy to aging, not easy to open the glue; 2.With wear resistance, not easy to be scratched, very easy to repair; 3.Acid, alkali and oil resistant, will not be corroded by acid and alkali; 4.Good quality, light weight, more comfortable wearing on the body; 5.The quality is stable, the price is relatively reasonable. Main Applications Suitable for sailors, dockers, aquaculture, fishermen, waterways workers, sewer workers, plumbers, shipbuilding employees, ship launches, pond maintenance, plant care work, nature lovers and other workers in wet and muddy conditions, which requires a protective layer to prevent liquids or hazardous materials. Advantages Top fabric with environmental protection technology 2.Not stiff, more comfortable to wear with excellent elasticity 3.Acid and alkali resistant, wearable, aging resistant, corrosion resistant, tear resistant 4.The texture is thick, and the material quality is guaranteed 5.High grade with good workmanship Factory Overview DERDEX was founded in 1998 and located in Yancheng, Jiangsu province, China. We are specialized in manufacturing waterproof clothing with experience of more than 20 years, such as fishing waders, raincoat, rain boots etc. We have more than 30 thousand square meters of factory workshop with more than 600 employees and more than 30 professional and technical personnel to ensure production capacity.
Men Fishing Waders Custom Attributes 1. Colour: customized/optional 2.Feature: Adjustable Belt/100% water proof/anti-slip boots 3.OEM: Yes 4.sample: Available 5. Gender: Unisex 6. Logo: Customized 7.Usage: Hunting, Forest, Fishing, Offshore work, Chemical industry,or other usages 8. Custom size: accept 9. Delivery date: 15days 10. Price: Competitive Characters 1.Not easy to aging, not easy to open the glue; 2.With wear resistance, not easy to be scratched, very easy to repair; 3.Acid, alkali and oil resistant, will not be corroded by acid and alkali; 4.Good quality, light weight, more comfortable wearing on the body; 5.The quality is stable, the price is relatively reasonable. Main Applications Suitable for sailors, dockers, aquaculture, fishermen, waterways workers, sewer workers, plumbers, shipbuilding employees, ship launches, pond maintenance, plant care work, nature lovers and other workers in wet and muddy conditions, which requires a protective layer to prevent liquids or hazardous materials. Advantages Top fabric with environmental protection technology 2.Not stiff, more comfortable to wear with excellent elasticity 3.Acid and alkali resistant, wearable, aging resistant, corrosion resistant, tear resistant 4.The texture is thick, and the material quality is guaranteed 5.High grade with good workmanship Factory Overview DERDEX was founded in 1998 and located in Yancheng, Jiangsu province, China. We are specialized in manufacturing waterproof clothing with experience of more than 20 years, such as fishing waders, raincoat, rain boots etc. We have more than 30 thousand square meters of factory workshop with more than 600 employees and more than 30 professional and technical personnel to ensure production capacity.
Product introduction: High temperature felt roller is mainly used for aluminum industry, the main function is to transport,transfer extruded aluminum profile. Our product can protect its surface and improve the quality and grade of aluminum. It is made of 100% Polyester.Its work temperature can up to 200 degrees for a long time or a short time. Specifications: Brand:HUATAO material : Polyester color:White Size:Make-to-order Work temperature:200 degrees Length: All size are available thickness :6mm~12mm Maximum internal diameter:168mm Minimum internal diameter:20mm Advantages: 1. Heat resistance up to 200ºC 2. Anti-Pull 3. Long service life against high quality 4. Wear-Resistant 5. Eco-Friendly 6. Competitive price and good service after sales
Product introduction: Our felt pad is made of high Nomex and Kevalr. The color is yellow. The highest temperature can up to 300 degrees.Our product could improve the scratch and black marks caused by graphite,especially suitable for the production of aluminum products with high requirements,if it is Heavy-duty extruders. Specifications: Brand:HUATAO Material: nomex and kevlar color: offwhite Work temperature:300 degrees Width: 10mm---2000mm Length: 10mm---2500mm Thickness: 2mm----20mm Advantages: 1. Heat resistant up to 300 2. No elongation under high tension and heavy load 3. High density with no delaminating; 4. Smooth and even belt surface: scratch-free extrusions 5. Excellent belt tracking on the cooling table 6. Low heat conductivity and high density with good wear resistance and impact resistance property under heavy conditions
Product introduction: This product can be used in aluminum production. Our product is made of 100% polyester and one layer Nomex tension member. Its highest temperature resistance can up to 200 degrees. Specifications: Brand:HUATAO material :100% polyester+ one layer Nomex tension member color: white Size:Make-to-order Highest work temperature:200 degrees Length:1000mm-20000mm Width:20mm-1500mm Thickness:6mm-12mm Advantages: 1.Eco-friendly material 2. soft and flat surface 3. Small weight, convenient storage 4. Easy to install, everyone can operate 5. The blanket has no joint as a whole and there is no break zone
Product introducKevlartion: PBO fiber is the kind of material that can resist high temperature up to 600.The needle-punched pad that combines PBO and Para-aramid layer is the ideal product to use for first-stage cooling table. Specifications: Brand:HUATAO material :PBO + kevlar color:brown and yellow Work temperature:600 degrees Width: 10mm---2000mm Length: 10mm---2500mm Thickness: 2mm----20mm Advantages: 1. Heat resistance up to 600; 2. High density with no delaminating; 3. Abrasion resistance with smooth cutting; 4. pollution-free material; 5. Competitive price and good service after sales.
Grey absorbent waterproof needle-punched painter mat: Construction: nonwoven fleece made of recycled cotton/polyester felt, bottom surface laminated with transparent anti-slip PE-foil Applications: Apply for the craft and the construction inside and outside use Suitable for covering and protection of floors, carpet and furniture in drywall, scaffolding, renovation, relocation, painting and plastering work Also used as a bed cover for animals, as protective blanket in the car or on soil protection on parking of bicycles and prams Performance: Protection against liquids and mechanical damage Simple, clean and fast interpreted Absorbent surface, impermeable underside of sheet Anti-slip bottom for secure grip (slip-resistant under surface for secure grip) Reusable, damp-proof Packing details: (1) Roll packing, one roll per shrink PE bag (2) One A4 insert inside roll (3) Loose into container (4) Loading quantity: 40ft HQ container: 3500 rolls FAQs: (1) May I get discount if  order bulk quantity grey absorbent waterproof needle-punched painter mat? Certainly, we welcome to more convenient communication for this and we will try my best to let you more edge over our local market competitors We insisted in that more quantity to me, more discount to you  (2) Can I get a urgent delivery to certain orders as special reasons? Regards to delivery, usually, our delivery is within 20-25 days follow up our production schedule But for urgent delivery, donâ??t worry, we can promptly adjust our schedule for you I have one case for your share: One of respected Germany customer, we total spent 4 days from order placed to our hand to loaded goods to container for shipping  (3) Can I get a sample for checking before we place the order of grey absorbent waterproof needle-punched painter mat? For sample, certainly, we are pleasure to send our free sample to your reference So, donâ??t hesitate Yes, you read that right Send your inquiry details  for free sample of recycled polyester felt paint materials
Technical specifications 1.Material:100% recycle cotton and non woven or polyester textile materials. 2.Weight:200g/sqm~1500g/sqm or as your as your requirements. 3.Specifications: 150*200, 180*220cm, 200*240cm or as your option 4.Colour:yellow/grey, blue, green or as your as your requirements. 5.Package:1pcs per bag or roll package with insert 20pcs in cartons or the quality per cartons is as buyers requested 6.Delivery date:15~30days after receiving order 7. Payment: t/t, l/c, western union, ; 30% deposits; 70% balance before delivery Feature 1. Reasonable price, with high quality 2. High warmth retention. Dustproof, anti-slip bottom for a secure grip. 3. Suitable for travel use: easy to carry and wash Application Suitable for various areas of application in the craft and the construction: 1. Picnic, travel, beach, hospital 2. Protect the fragile goods 3. Protection against furniture and mechanical damage
Technical Specification Color White Material Felt with self adhesive coating/ PE membrane Thickness Appr 1.7 mm Width 100 cm Roll length 25M Weight 160 g/m2(+/5%) Construction Top layer is PE foil Middle layer is Nonwoven fleece Bottom layer is self-adhesive coating H.S code: 56039490 Features 1)non-slip on stairs , fixation with no tape,for secure construction sites; 2)impermeable, protects conrete against liquids of all kinds; 3)extremely robust and tear-resistant; 4)does not moult when wiping; 5)easy installation and disposal; 6)can be wiped and vaccumed; 7)no residues were on the ground. Applications 1)safer and more effective protection for flooring. 2)particularly dense protective fleece with a waterproof film. Floor and stairs are so protected optimally even under unfavorable conditions. 3)makes for a clean and safe building site
Technical Specification Color White Material Felt with self adhesive coating/ PE membrane Thickness Appr 1.7 mm Width 100 cm Roll length 25M Weight 160 g/m2(+/5%) Construction Top layer is PE foil Middle layer is Nonwoven fleece Bottom layer is self-adhesive coating H.S code: 56039490 Features 1)non-slip on stairs , fixation with no tape,for secure construction sites; 2)impermeable, protects conrete against liquids of all kinds; 3)extremely robust and tear-resistant; 4)does not moult when wiping; 5)easy installation and disposal; 6)can be wiped and vaccumed; 7)no residues were on the ground. Applications 1)safer and more effective protection for flooring. 2)particularly dense protective fleece with a waterproof film. Floor and stairs are so protected optimally even under unfavorable conditions. 3)makes for a clean and safe building site
Technical specification Color White Material Felt with self adhesive coating/ pe membrane Thickness Appr 1.7 mm Width 100 cm Roll length 25m Weight 160 g/m2(+/5%) Construction Top layer is pe foil Middle layer is nonwoven fleece Bottom layer is self-adhesive coating H.S code: 56039490 Features 1)non-slip on stairs , fixation with no tape, for secure construction sites; 2)impermeable, protects conrete against liquids of all kinds; 3)extremely robust and tear-resistant; 4)does not moult when wiping; 5)easy installation and disposal; 6)can be wiped and vaccumed; 7)no residues were on the ground. Applications 1)safer and more effective protection for flooring. 2)particularly dense protective fleece with a waterproof film. Floor and stairs are so protected Optimally even under unfavorable conditions. 3)makes for a clean and safe building site
Technical Specification Color White Material Felt with self adhesive coating/ PE membrane Thickness Appr 1.7 mm Width 100 cm Roll length 25M Weight 160 g/m2(+/5%) Construction Top layer is PE foil Middle layer is Nonwoven leece Bottom layer is self-adhesive coating H.S code: 56039490 Features 1)non-slip on stairs , fixation with no tape,for secure construction sites; 2)impermeable, protects conrete against liquids of all kinds; 3)extremely robust and tear-resistant; 4)does not moult when wiping; 5)easy installation and disposal; 6)can be wiped and vaccumed; 7)no residues were on the ground. Applications 1)safer and more effective protection for flooring. 2)particularly dense protective fleece with a waterproof film. Floor and stairs are so protected optimally even under unfavorable conditions. 3)makes for a clean and safe building site
