Barium Hydroxide : Chemical Formula Ba (OH)2 8H20 Packing : 50 Kgs HDPE bags with thick inner liner. Physical Property : White powder soluble in dilute acids slightly soluble in water. Chemical Property : Assay (as Ba(OH)2 8H20) % by mass min. 95. Iron as (Fe) mass min 0.003. pH of aqueous solution ranges between 7.5 to 9.0. Uses : manufacturing of oil & grease additives, purifying agent for Caustic Soda, Refining edible oils.
Barium Nitrate : U.N.NO 1446. Chemical Formula Ba (NO3) 2 Packing : 50 Kgs HDPE bags with thick inner liner. Physical Property : Lustrous, White crystal, Soluble in water, insoluble in Alcohol. Chemical Property : % of material content as Ba(NO3)2 mass min. 99.00. pH of 5% solution 5.5 to 7.5. Moisture % by mass min 0.5 Sulphur nil. Uses : Pyrotechnics (gives green light), ceramic glazes, Electronics.
Barium Chromate : Chemical Formula BaCrO4 Packing : 50 Kgs HDPE bags with thick inner liner. Physical Property : Heavy yellow crystalline powder insoluble in water Sp.Gr.4.5 Chemical Property : % of material content as BaCrO4 is 97.5 to 98.5%. Water-soluble Sulphates & Chloride as SO4 & Cl % by mass max. 0.1. Matter soluble in water % by mass max 0.5 oil absorption 8 to 20. Uses : Safety matches, Pigment in Paints, Metal Primers, For Explosive & Pyrotechnic industry.
Barium Sulphate (Precipitated) : Chemical Formula BaSO4 Packing : 50 Kgs HDPE bags with thick inner liner. Physical Property : Precipitated white heavy inorganic powder. Tasteless, Non-toxic & Noncombustible. Refractive index 1.6 to 1.7. Particle Size Passing 300 Mesh. Chemical Property: % of material as BaSO4 mass max 98% Volatile matter % by mass max (moisture) 0.5 oil absorption (Ml / 100gm) 20 +/- 3 matter soluble in (NaCl) as % by mass max 0.5. pH 6-8. Relative density 4.45 Uses : It is called as BLANK FIXE It is used in Paint, Epoxy Adhesive, Chemical resistance cement, Water proofing compound, Crayons & many other uses. We can give very fine powder of upt 2 micron
Barium Sulphate (Natural Ore) : Chemical Formula BaSO4.It is known as Barites Packing : 50 Kgs HDPE bags with thick inner liner. Physical Property : White or Yellowish, Odorless tasteless powder. Chemical Property: % of material as BaSO4 97%. Iron as (Fe) % mass max 0.10 to 1.5. Particle size 200 to 300 mesh. Sp.Gr 4 - 4.5. Aluminum as (Al) % by mass max. 0.10. Silica as (SiO2) % by mass max 2.0 to 6.0. Relative density at 27oC min 4.15. matter soluble in water % by mass max 0.02. Uses : Off color material used for weighting mud in oil drilling.White color material used for paper coating paints Filler and delustrant textiles. In battery plate expanders.
Textile Auxiliaries Leading manufacturer and exporter of Textile Auxiliaries from India Main manufacturer and exporter of textile auxiliaries of India Fihrende Hersteller und Exporteur von Textilhilfsmitteln aus Indien Manufacturer and exporter of Textile Auxiliaries from India - Wetting - Scouring - Stain Removing Agents - Lubricating - Anti Creasing Agent - Peroxide Stabilizers - Peroxide Killers - Sequestering Agents - Alkali Buffers (soda Ash Replacements) - Acidic Buffers (acetic Acid Replacements) - Levelling Agents/dye Bath Conditioners - Washing Off / Soaping Agents - Dye Fixing Agent - Finishing Range - Specialty Finishes - Silicone Based Softeners (amino Based & Hydrophillic)
We have produced and exported sodium alginate more than 14 years ,our sodium alginate is very suitable for flat bed, rotary and roller screen printing . Welcome to contact with me .
high quality sodium alginate manufacturer !
We are - Manufacturer / Suppliers / Exporter for SILKO - FEEL - Softener / Silko-Sizeing Chemical . SILKO - FEEL- Softener is a Acrylic Co Polymer SOFTENER Specially formulated to give SOFT , SILKY ,LUSTROUS and BOUNCY feel to any fabric & woolen & TERRY TOWEL & YARN DYEING ( natural ,Man Made or blends ) 50/KGS BLUE PLASTIC CARBO
Textile Dyeing Industrial Glacial Acetic Acid 99% 99.5% 99.8% Popular name:Vinegar acid,Glacial acetic acid; Acetic acid solution;Acetic Acid GlacialBP;GAA MF:CH3COOH Cas No.:64-19-7 EINECS No.:200-580-7 Hs code:2915211900 UN NO.:2789 Dangerous Goods Class: 8 Appearance: transparent liquid, stimulating odour. Melting point:16.635 Boiling point :117.9 Grade: Agriculture Grade,Food Grade,Industrial Grade,Medicine Grade,Reagent Grade Packing details:25kg/drum, 20MT/20FCL 30kg/drum, 21MT/20FCL 225kg/drum, 18MT/20FCL IBC 1100kg, 22MT/20FCL
Introduction : RX-12558 was multifunction organic-silicone fluid softener. It imparts durable, wash resistant to fibers, textures and leathers. Traditional softeners (e.g. amino-functional silicones) generally cause the fabric to become extremely hydrophobic. But RX-12558 is designed to provide hydrophilic & softening to all kind of textures, leathers and hairs. Especially, RX-1288 may be applied by exhaustion methods for treating various fabrics without side reaction. Specifications : appearance clear to opaque special gravity 1.02 active content 80.%
Various types of textile fabric printing thickeners. for hand screen,flat bed,rotary. for reactive,vat,napthol,acid,procion,ramazol dye printing. AGBV UBV NBV CMG WHITE ACID DEVELOPED ETC.
A molecular sieve is a material with tiny, uniform pores that is used to adsorb gases and liquids. Unlike common filters, the molecular sieve operates on a molecular level. It only could adsorb molecules which are small enough to pass through the pores, such as water molecules. Because of this, the molecular sieve is usually used as a desiccant, which can adsorb water up to 22% of its own weight. Molecular sieves often consist of aluminosilicate minerals, clays, zeolites, active carbons, synthetic compounds, etc. that have pores which small molecules can pass through. Usually, a 4 to 8 mesh sieve is ideal for gas phase applications, and a 8 to 12 mesh sieve is perfect for liquid phase applications. The powder forms of the 3A, 4A, 5A and 13X sieves are used in specialized applications. Xiangrun is an experienced molecular sieve manufacturer in China. To ensure our customers could find the product they are looking for, we offer four types of molecular sieves, which are listed below carton packing, drum packing
As the sizing, it can enhance the solubility and viscosity changes and easy desizing. It also could ensure the uniformity of sizing and enhance the efficiency od weaving.As the textile finishing agents, especially the permanent wrinkle resistant finish 20/25kg net composite paper-plastic bags or 3-ply kraft paper bags with pe liner
Ammonium polyphosphate Oxyl groups to form a nonstable phosphateester. Following dehydration of the phosphateester, a carbon foam is built iciency intumescent coating, the flameproof treatment for multistory building, ships, trains, cables, etc. 2. Used as the main flameproof additive for expanding-type flame retardant used in plastic, resin, rubber, etc. 3. Make into powder extinguishing agent to be used in large-area outfire for forest, oil field and coal field, etc. 4. In plastics (pp, pvc, pe, etc.), polyester, rubber, and expandable fireproof coatings. Packing: 25kg plastic woven bag with pe liner. 20mt/20¡¯fcl without pallets, 18mt/20¡¯fcl with pallets. Other packing as request.
We are supplying chemicals which has been accredited nationally and internationally and also compiled to international quality standards.We are catering in wide variety as our products are applicable to fabric, yarn/thread, denim, knit, woven & home furnishings. Applications: 1). Wet processing additives 2). Pre-treatment formulations for wet processing 3). Silicone specialties 4). Organic Softeners 5). Bio polishing enzyme 6). Neutral cellulose enzyme 7). Acid cellulose for denims Our products are widely used in many textile industries, as for that we call us friend to them and also to the Eco system.
In textile printing and dyeing industry, sodium alginate acts as active dyestuff paste, which have more advantages than using grains, starch and other paste. The printed fabrics feature bright color, clear outline, high color yield, even and uniform color, good penetration and good hand-feel. Sodium alginate is the optimum printing paste in modern printing & dyeing industry, it is widely used for cotton, wool, silk, nylon, synthetic fiber, particularly applicable to discharge printing paste preparation. It also can be used in warp sizing, it not only save grains, but also making the warp fiber not fluff, friction-resistant, no breakage, so that fiber weaving efficiency is improved. It works for both cotton fiber and synthetic fiber. 25kg/bag
Specifications 1 Print paste hot transfer print paste for fabric 2 Softness/good fastness/washable 3 High elasticity 4 Dry naturely 5 Gloss This product is a print paste of water-based hot-melt performance. Its anionic. People use the product to print in cloths, it can cross-linking and self-cross-linking, it was used for Foil Printing ,Glue printing , Flocking printing in every textiles . After printed with the product, the textiles are felt soft, Washable and Flexible. This product is stable property, Non-toxic, Environmental protection, is the best choice for printing in cloth and textiles. Technical order Serial number Project Instruction 1 Outward appearance Cream color and paste 2 Solid content (%) 50+1 3 PH 5-7 Packaging: 50KG /CAN Storage condition: 5- 35, put the product in the cool and dry place by sealed. Storage life: 6 Months. Usage: The use of such products can be diversified; you can move the cold/silver paper on to the cloth with 150-170 by the traditional process, and you could also move the gold/silver paper to the cloth directly before the paste dry completely. Hot process method: 1. print on the cloth for 3-4 times 2. dry it naturally 3. bronzing in 150-170. Cold process method: Print on the cloth for 3-4 times¡úsurface dry ¡úbronzing¡úput up the cloths¡údry it with 150-170 ¡úfinished goods Paste up the pearls process method: print on the cloth for 2-3times ¡úpaste up the pearls¡údry naturally¡úhot pressing for 15 seconds with 150.
Specifications Binder for pigment printing Ingredient:acrylic acid polymer Physicochemical properties: Appearance:white slightly blue light emulsion Ion:anionic/nonionic PH value:7-8. Characteristics 1. Eco friendly thickener for aqueous printing 2. Strong water cohesive and thickening ability 3. High concentration, small dosage, no influence to handle, good color yield, sharp definition. 4. To enhance colour depth in loop ager for disperse prints. 5. Tested by independent testing centers (SGS) in China. 6. Available to be used in cotton cloth, T/C cloth, nylon, special fibers and pass 110-120 degrees of heat treatment after finishing printing. Usage self-crosslinking type of binder,good compatibility with various pigments,preparation of paste,no fouling or clogging,good stability,directly mixed with pigment and thickener to prepare paste.Low formaldehyde content,can meet the requirements for export,application to pigment printing of various fiber fabrics. Application methods mixed with pigment,thickener and water for paste with stirring,adding some crosslinker(10-15% ratio to binder) will obtain better results,printing,drying and curing at 150¡ãC for 3 mimutes or 170-180¡ãC for 30 seconds.If dosage of pigment is 5-8%,adding 10-20% binder,for printing special dark color,increase the binder dosage. Package and storage:200kg plastic drum,sealed at cool,dry place,validity for 6 months.
Specifications Product description: I. Properties: (1) Appearance: milk white paste. (2) Composition: high molecular polymer latex and filling compound (3) Ion type: Negative ion type or Non-ionic type II. Characteristics (1) Good screen-passing property, strong covering power, soft hand feeling. (2) Good elasticity, good fastness, well washable (3) Smooth and lustrous surface, not sticky to hands III. Application scope: It is suitable for deep or light colored elastic cotton fabrics or cotton blended fabrics. environment friendly elastic white paste. Elastic Paste 1. Color: Milk White / Milk White 2. Element: Multi-polymer & titanium powders & auxiliary / Multi-polymer & auxiliary 3. PH: 7.5-8.5 /7.0-8.0 4. Irons: Negative ions / Negative ions 5. Elasticity: 12-140000pcs / 10-120000pcs 6. Stability: Good / Good 7. Application: Printings for clothes, toys and textile; all kinds of cottons, TC clothes, blending, weaving clothes etc 8. Characteristics: Good covering power, high whiteness & elasticity, water-washing fastness, non stick, good hand-feeling and high elasticity.
