I.Functional Characteristics
1.Provides remote start port, time setting function of delayed start and stop ;can control genset to start , stop and load automatically.
2.All the relay output contact capacity is over 10A.
3.Convenient ATS control function, with mains supply output and genset emergency supply output.
4.Two connecting ways of Coolant temperature and oil pressure:analog measurement and alarm switch
5.Auto-record the running time of genset.
6.Protection functions: low oil pressure, high coolant, over speed, emergency stop and over crank, ect.
1. Fractional horsepower motor
2. Fluorescent ballasts
3. Motor of washer
4. Motor of
5. Transformers
6. Lighting lamps
7. Dc motor of automobile
8. Battery changer
9. Household electric appliances
10. Oa-machines etc.
Key specifications/special features:
1. Dimension case: 18.5mmx6.7mmx3.6mm
(with leading wire 45mm-5mm normally)
2. Rated voltage: ac250v/125v (50/60hz)
3. Rated current: 6a/12a
4. Rated open temperature range: 45~145 degrees centigrade, in steps of 5 degrees centigrade.
5. Tolerance: (+/-)5 degrees centigrade
6. Resetting temperature: lower than rated open temperature 30(+/-)15 degrees centigrade
7. Switching cycles in: 10, 000 cycles
8. Contact arrangement: normally closed
9. Standard contact resistance: ≤50mª+
Pack information: to be informed
Third party certificates:
Vde ul
Product sample availability policy:
Free below 10 pcs samples but transport charge
Order lead times(days):
7~10 days
Minimum order quantity:
No
Ptc thermistors are used to monitor temperature in machines and installations. The design ensures short response times and easy installation.
The product sells point
Ptc thermistors acc. To din 44081(triple sensors acc. To din 44082) are used to protect electrical machines against thermal overload. Thermistors have an even steeper r/t characteristic as that defined in the din standard. The temperature range is from 60 to 180. Ptc thermistors beads with different rated response temperatures can be connected in series. This permits an optimal and economic thermal protection of machines and windings with different limit tempratures.
Key specifications/special features
Single triple
Max.Operating voltage 30 30 v
Rated response temperature tk60-18 c
Tolerance of tk ía5 ía5 k
Resproducibility of tk ía0.5 ía0.5 k
Resistance r25 ín100 ín300 ª+
Resistance at a temperature of tk-5k ín550 ín1650 ª+
Resistance at a temperature of tk +5k í²1330 í²3990 ª+
Resistance at a temperature of tk +15k í²4 í²12 kª+
Thermal response time td ín5 ín5 s
Insulation test voltage v ac2.5 ac2.5 kv
Max.Operating temprature 200 200 c
Max.Storage temperature 160 160 c
Min.Srorage temperature -25 -25 c
Weight 2 3.5 g
1.Hid ballast,
2.Battery packs,
3.Fractional power motor,
4.Ac brushless motor and pump,
5.Dc motor, heating appliance
(best replacement of ys-11 and st22)
The product sells point
1.Club-shape contact, jointing better with spot welding
2.Miniature size
3.Positive make and break with snap-action disc
4.Repeatable temperature performance over life
5.Various resistances of bimetal avaliable
6.Gasketed case suitable for most impregnation processes
7.Substitute ys-11, st22 series
Key specifications/special features
Maximum contact ratings10k(10a/24vdc 5a/250vac)
Opening temperature 30~155 ípc
Telorance ía5 ípc
Resistance less than 25 mª
1.It is made of specular stainless steel(304 in China) and semicirular arcs at corners ensures easy cleaning.
2.Microprocessor temperature controller makes temperature stability.
3.Door temperature controller prevents dewfall on glass door of incubator effectively.
4.Microorganism filter at inlet provides 100% filtrated gases.
5.Main parts are all imported,equipped with CO2 pressure releasing valve.(Special for CO2 incubator)
Model HHCP-T(80L)with UV light
Electrical Requirement 220V 50HZ
Input Power (W) 450
Heating Method Air-jacket
Temperature Range(Degree) RT+5~50
Temperature Control (Degree) 0.1
Temperature Stability(Degree) 0.3
CO2 Range 0~20%
CO2 Recovery Calibration*1.2min
Humidifying Method Natural Evaporization
Ambient Temperature(Degree) +5~35
Cubage(L) 80L
W*D*H Interior Dimension(mm) 500*400*400
W*D*H Overall Dimension(mm) 570*570*820
Shelves per Chamber 2PCS .
Packing Style: Standard Export Packing Style
W*D*H Packing Dimension(mm): 710*710*920
Gross Weight: 67KG
Net Weight: 51.5KG.
2108 Temperature Controllers Indicators Suppliers
Short on time? Let Temperature Controllers Indicators sellers contact you.
Size: FY400(48X48 mm), FY600(96X48mm), FY700(72X72mm), FY800(48X96mm), FY900(96X96mm)
Supply voltage: AC 85-265V, DC 24V
Frequency: 50/60 Hz
Memory: Non-volatile memory E PROM
Input: Universal
Thermocouple - type K, J, R, S, B, E, N,T , W5Re/W26Re
RTD - DPT100, JPT100, JPT50
mA dc - 4-20mA, 0-20mA
voltage Dc - 0-1V, 0-5V, 0-10V, 1-5V, 2-10V, -10-10mV 0-10 mV, 0-50mV, 10-50mV
DP position: 0000, 000.0, 00.00, 0.000 (available for mA or Voltage dc input).
Output:
Relay: SPST or SPDT Type 3A, 220V electrical life 100,000 times or more(under rated load)
Voltage Pulse: for SSR, On: 24V Off: 0V maximun load current 20mA
mA DC: 4-20 mA, 0-20 mA maximum load resistance 560 ohms
Voltage DC: 0-5V, 0-10V, 1-5V, 2-10V Maximum load current 20mA
Alarm: SPST or SPDT type 3A, 220V electrical life 100,000 times or more (under the rated load)
Control Algorithms: PID, P, PI, PD On/Off (P=0), Fuzzy
PID range P= 0-200%, I=0-3600 secs, D=0-900 Secs
Isolation: Output terminal ( control output, alarm, transmission) and input terminal are isolated separately
Operating Temperature: 0-50 deg C
Humidity: 20-90% RH
Optional Specs
RAMP/SOAK program : 2 patterns with 8 segments each, the 2 patterns can be linked together as 16 segments use
Output 2:
Relay: SPST or SPDT Type 3A, 220V electrical life 100,000 times or more(under rated load)
Voltage Pulse: for SSR, On: 24V Off: 0V maximun load current 20mA
mA DC: 4-20 mA, 0-20 mA maximum load resistance 560 ohms
Voltage DC: 0-5V, 0-10V, 1-5V, 2-10V Maximum load current 20mA
Alarms capable up to 3 alarms
Heater Break Alarm: Display range of Heater Current: 0.0-99.9A Accuracy 1%FS
Included CT; SC_80_T (5.8mm dia, 0.0-80.0A) or SC_100 12mm Dia, 0.0-99.9A)
Alarm Relay AL1
Transmission: Available for PV and SV transmission
mA DC: 4-20 mA, 0-20 mA maximum load resistance 560 ohms
Voltage DC: 0-5V, 0-10v, 1-5V, 2-10V maximum load current 20mA
Remote SV Input: 4-20mA, 0-20mA 0-5V 0-10V, 1-5V, 2-10V are available
Communication: Protocol: MODBUS RTU, MODBUS ASCII, TAIE
interface: RS232, RS485, TTL
Baudrate: 38400, 19200, 9600, 4800, 2400 bps.
8 bit, start bit: 1bit, Parity : ODD or even stop bit: 1 or 2 bit
WaterProof/Dustprof: IP65.
Motor speed controller/ ac drive 380v/220v, three phase/ single phase, 50/60hz input, 0-400hz output.
1. Advanced vector control algorithm , combine accurate speed calculation and self learning of the motor parameter. It realize the accuracy control of motor speed and torque under no- speed sensor mode. V/f and svc can be selected .
2. Optimized space voltage vector pwm modulation technology, has over-modulation function, high voltage-utilization, low output harmonic, and it greatly improves the motorí»s stability and switching loss.
3. Good operation characteristic of low frequency, can realize 0.5hz/150% rated torque output which under no-speed sensor mode.
4. LCD and led double display keyboard, display digit and chinese , the user can operate easily.
Temperature Logging System) is an advanced independent weather monitoring system. It supports Secure Digital card which is used to record the data for 10 years with 2GB SD card and with a LCD for on-line monitoring
Change in temperature at every time second is recorded
Auto sense with 10 years report
Solar powered
No external power supply required
Supports secure Digital card
Auto Data Save Algorithm used
Lcd Display for upto date temperature
Inbuilt RTC
Report with Date/Month/Year/Hr/Min/Sec
Suitable for any remote place
Temperature is calibrated in celsius
Led indication
On -off switch for recording.
Softwareshouse water level controller is an efficient easy to install and easy to use device that can be used in houses, flats and also commercial buildings. This new era device has been equipped with lcd display and push button to set time. It has features like auto set and also manual set. It comes in an attractive packing which can be clamped on to the wall.
Rating: 15A, 125VAC (resistive load)
Operating Temperature: 50 to 190 degrees Celsius
Insulation Resistance: Over 100M ohms
Dielectric Strength: Over 1,800VAC for 1 second between sensing cap and live terminals
Operating Life:
100,000 cycles (at 10A 250VAC resistive load)
10,000 cycles (at 15A 250VAC resistive load).
Our company provide many different products like weather station, rain gauge, light meter & sensor and thermo hygrometer according to our customers needs.
Applications:
The Series C2 gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.
Feartures:
Wide choices of 56 ranges available to suit your needs
Simple, frictionless movement, it quickly indicates low air or non-corrosive gas pressures-either positive, negative or differential
The design resists shock, vibration and over-pressures
No any fluid to evaporate, freeze or cause toxic and leveling problems
It's inexpensive
High accuracy-guaranteed within 2.5% of full scale Specifications
Specifications:
Service: Air and non-combustible compatible gases. (Natural Gas option available.)
Housing: Die cast aluminum case and bezel, with acrylic cover, exterior finish is coated gray
Accuracy: í+2.5% of full scale
Pressure Limits: -70 to 100 KPa
Size: 4" diameter dial face
Temperature Limits: 20 to 140ípF (-6.67 to 60ípC) Mounting Orientation: Diaphragm in vertical position Connections: 1⁄8" NPT(F) high and low pressure taps, duplicated-one pair side and one pair back Weight: 500g
Standard accessories: 1 m connecting tube, two 1⁄8" NPT plugs for duplicate pressure taps, two1⁄8" pipe thread to rubber tubing adapters and three flush mounting adapters with 3 screws
Mounting and Options:
They can be flush or surface mounted and pressure connected with standard hardware supplied
With the optional A-610 Pipe Mounting Kit they may be conveniently installed on horizontal or vertical 11⁄4" -2" pipe
Adjustable signal flag Integral with plastic gage cover. Available for most ranges except those with medium or high pressure construction. Can be ordered with gage or separate
MODELS:
Mode Range Fluid Used
C1-3 0-3in.w.c. Red Oil
C1-80 0-80mm w.c. Red Oil
C1-700PA 10-0-700PA Red Oil
Applications:
C1008 is a low cost, state-of-the-art, maintenance-free infrared carbon dioxide transmitter in the climate zone or in the ventilation duct. It can help you to decrease your energy consumption while maintaining a healthier indoor climate.
Features:
Using SenseAir´s patented NDIR technology and offers reliable measurements
Two analogue & one relay contact outputs
Maintenance-free in normal applications
Non-frill design; cost-optimized for connection to DDC/PLC
Two different housing options:
1) IP20 wall mount (w or w/o LED bar display)
2) IP65 duct mount (without display)
Operating Temperature Range : 0 - 50ípC
Storage Temperature Range: -40 to +70ípC
Specifications:
Operating Humidity Range: 0 to 95% RH (non-condensing)
Warm-up Time: í_ 1 min. (@ full specs í_ 15 minutes)
Sensor Life Expectancy: > 15 years
Maintenance Interval: no maintenance required
Power Input: 24 VAC/VDC
Power Consumption: < 1 W
Sensing method : Gold-plated infrared (NDIR) wave-guide
technology with Automatic Background Calibration (ABC)
and passive gas diffusion
Measurement range: 0-2000 ppm CO2
Repeatability: í+ 20 ppm í+ 1 % of reading
Accuracy: í+ 30 ppm í+ 2 % of reading
Annual Zero Drift : < í+ 10 ppm
Pressure Dependence: + 1.6 % reading per hPa
OUT 1: 0 -10 VDC for 0 - 2 000 ppm
OUT 2: 4 ¿C 20mA for 0 - 2000 ppm
Options OUT 3: N.C. & N.O.: contacts pre-set at 1000ppm
Housing and Dimension:
WALL MOUNT (standard)
Dimension: 100 x 80 x 27 mm (H x W x D)
Protection class: IP20
60 mm hole separation for European standard J-boxes.
DUCT MOUNT (model ¿CK)
Dimension: 142 x 84 x 46 mm (H x W x D)
Duct probe length: 245 mm
(adjustable according to duct dimension)
Protection class: IP65
MODELS: Model Descriptions
VC1008T Basic sensor/transmitter without display, wall mount,IP20 housing
VC1008T-Ks Basic sensor/transmitter without display, duct mount,IP65 housing
Options
-R Relay contact:24V,1A voltage free,Relay setpoint:1000ppm
-NTC NTC temperature sensor
-PTXX PT100 or PT1000 temperature sensor
Other ranges 0.6%,2%,4%
The thermostat makes use of high sensitive dual metal sensors to control the room temperature in a certain range. It can be used in hotel, office building, supermarket, factory, hospital and vella, ect.
The S6061 Series is direct-mount line of electric actuators that operates on 24VAC or VDC poser and is available for use with floating, proportional, or resistive controllers. S6061-series output 4 ~ 24 Nm torques, and each of them has
two models: Digital and Analogue
The S6057 series brass valve are primarily designed to regulate the flow of water in response to the demand of
a controller in zone and fan coil applications. They can be used in combination with an electric on/off actuator S6056.
The valves are availabe in 2 way N.C. (Normally Closed) or 3 way configuations. The 6056 electric on/off actuator provides a two positions (open-closed) control. This compact, spring return actuator has 105N minimum seating force in a compact, easy-to install package.
2108 Temperature Controllers Indicators Suppliers
Short on time? Let Temperature Controllers Indicators sellers contact you.
