1) surfing pump:2-3¡á3hp 2) circulating pump:1¡á1hp 3) blower: 1¡á1hp 4) heater: 2-1¡á3kw 5) ozone: 8w/12vac v Ctn size: 45¡á27¡á28cm(2set/ctn) Per set includes a ectrical box and a control panel.
1) three working modes: normal mode, economic mode and filter mode. 2) plug-and-play mode is to get easy operation and easy installation. (b type) 3) 24 hours clock display and setup of circulation-cleaning 4) synchronously change or fix color with multiple lights and ozone antivirus system. 5) an additional load aux output (b type) one) overcurrent protection. 9) overcurrent protection of circulating pump (b type) 10) switchbank can select various functions 11) error code hinting Ctn size:45¡á27¡á28cm(3set/ctn)
Per set includes a electric controller, a control panel and a heater 1) plug-and-play mode is to get the easy operation and easy installation. 2) three working modes: normal mode, economic mode and filter mode. 3) the clock display and setting of circulation-cleaning for 24 hours 4) synchronous changing color with multiple lights and fixed color light and ozone antivirus system. 5) automatically anti-freeze 6) double color buttons backlighting e) overcurrent protection 12) overcurrent protection of circulating pump 13) error code hinting Ctn size: 45¡á27¡á28cm(2set/ctn)
Working principle of the oil heater The user only needs to connect the equipment to a power supply, and arrange medium inlet and outlet pipes and electrical interfaces before use. Electrical heat conduction oil furnace (also known as oil transfer heater), the electric heater is directly inserted into the organic carrier (heat transfer oil) for direct heating. A circulating pump is used to create liquid-phase circulation of heat conduction oil, thus, to transfer the heat to one or several pieces of heat using equipment. After unloaded in the heat using equipment, heat transfer oil will return to the heater via the circulating pump, again to absorb heat, and transfer the heat to the heat using equipment. This process is repeated again and again, realizing continuous transfer of heat. As a result, the temperature of objects being heated rises, and heating requirements are fulfilled. The oil heat transfer machine adopts a digital display temperature controller, and has functions of over temperature alarm, low oil level alarm and over pressure alarm. Characteristics of oil heater 1)our electric heat conduction oil furnace is equipped with a perfect operating control and safet monitoring device, so it can realize automation control 2)it can reach a higher operating temperature under lower operating pressure 3)high thermal efficiency, can reach to higher than 95%, the control precision can be 4)the equipment is of small volume, flexibility to install, adapting to install nearby the heat using equipment
4 quartz tubes 1800w With fan and humidifier With safety switch 6ocs/ctn
1.Specification: 1) rated power: 9000w/12000w/15000w/18000w/21000w/24000w/27000w 2) rated voltage: 400v 3) frequency: 50/60hz 4) optional color: red, silver, purple, black, white 5) housing material:imd film 6) installation: wall mounted 7) moq: 100pcs 2. Features: 1) on-demand hot water - never runs out 2) reduce water heating costs by as much as 50% 3) compact design saves space, luxury imd (in-mold decoration) front cover 4) far less likely to leak or rupture 5) substantially reduces risk of scalding injuries to children and elderly 6) maintains efficiency throughout its service life 7) less prone to hard water, sediment, or mineral problems 8) long service life! 3. Packing: 1) dimension: Product: 385*260*90mm Gift box: 475*135*367mm Carton(4pcs/ctn): 570*490*385mm 2) weight: Unit n.W.: 4.7kg Carton g.W.: 28kg 4. Conveyance: 1) 20 fcl: 1120pcs 2) 40 fcl: 2240pcs 3) 40hq: 2120pcs
Power: 2.0 Voltage and current: 220v/9a Adaptation bearing diameter: >15 Largest bearing diameter:200 Maximum bearing width: 110 Maximum load-bearing: 25kg Heating configuration: 10 Total mass: 14kg Heater dimensions: 42x19x28cm
Power: 2.0 Voltage and current: 220v/9a Adaptation bearing diameter: >15 Largest bearing diameter: 400 Maximum bearing width: 140 Maximum load-bearing: 25 Heating configuration: 10 Total mass: 29 Heater dimensions: 32*32*32
Power: 5.0 Voltage and current: 380v/13a Adaptation bearing diameter: >30 Largest bearing diameter: 500 Maximum bearing width: 140 Maximum load-bearing: 65 Heating configuration: 20.30.40.60 Total mass: 41kg Heater dimensions: 42*42*42cm
We are the manufacturer and supplier of thermic fluid heater. Features: Thermic fluid heater temp : 30000 c. Standard model, 35000 c high temperature models & 40000 c vapour design. Capacity : 30000 kcal/hr to 9 million kcal/hr. Fuel : wood, coal, lignite, diesel, ldo, fo, bio-mass, husk, biogas, pet-coke fired, agro waste, electrical thermic fluid heater.
MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals. The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating. The heating equipments are equipped with handle torch of different shapes, so more efficient. Our SPQ-10 has air conditioning water cooling system. SPQ-06 has water cooling system. SPQ-1.5 has air cooling system and special for 4S car shop. Specification: SPQ-1.5 Dimension300mm*300mm*220mm Input Voltage2phases 220V Output Power1.5KW Tube Length6m Cooling SystemWater cooled Weight12kg Model SpecificationSPQ-06 Input Voltage1 Phrase 220V/50~60HZ Input Power 6KW Water Pump Power0.33KW Load duration rate60% Host Volume900mmX830mmX590mm Weight120KG Hand lead line /weight¦µ5.5X20CM/2KG Hand lead line extension6M Water Tank 25L Cooling systemAir Condition Water cooled Circulation Period>60Mins Wooden case
Features: 1.Fast, effortless removal of glass, emblems, bonded body components, rusty bolts and much more. 2.Flameless heat reduces the need for torches, solvents and abrasives. 3.Less flame and solvents reduces potential safety hazards and insurance rates. 4.Only heats metal objects, enabling it to be used in or near heat-sensitive areas. 5.Wide range of heating inductors for increased versatility. 6.Easy-to-read heat output meter to quickly verify induction heat. 7.Output isolation transformer provides the safest possible operation. Model: spq-1.5 Dimension: 300mm*300mm*220mm Input: /input voltage: 2phases 220v Working frequency: auto frequency locking and tracking. Output power: 1.5kw Tube length: 6m Cooling system: air cooled Working cycle: >45 minutes Weight: 12kg Model: spq-1.5 Dimension: 300mm*300mm*220mm Input: /input voltage: 2phases 220v Working frequency: auto frequency locking and tracking. Output power: 1.5kw Tube length: 6m Cooling system: air cooled Working cycle: >45 minutes Weight: 12kg
MODERN Series Induction Heaters carry the most advanced transduction control technology. By long distance induction, electric power is transmitted into heated conductors efficiently and the temperature of conductors is quickly up. The series is the best equipments to remove collision stress from thick metals. The heating way is direct, no fire, safety, efficient and green. It has been the best heating equipments for auto frame, chassis, connection plate, etc. before and after straightening. It avoids the hidden danger of fire heating. The heating equipments are equipped with handle torch of different shapes, so more efficient. SPQ-1.5 has air cooling system and special for 4S car shop. SPQ-06 has water cooling system. Our SPQ-10 has air conditioning water cooling system. It has a very high degree of efficiency and is water-cooled using a closed compressor-powered system. Through the use of automatic control monitors, the power output remains constant during the heating process. The SPQ -06/10 is designed for heavy work demanding fast and thorough heating of the material, for example, for straightening of chassis, and for coarser parts and axles. This machine is convenient for heavy-duty vehicle repairs. SPQ-06/10 Induction Heater is the top efficient equipment used for repairing heavy duty and car chassis. When using our induction heater, the temperature can be up to 600¡ãC within seconds,which can soften 5mm plate within 8 seconds and soften 8mm plate within 12 seconds. The induction heater can work over 60 minutes constantly, which can save your time and improve working efficiency with a steady performance.
FEATURE: Power Consumption: 850W-900W Working Voltage: 220 -240volts, 50 Hz Surface color: white Front Surface Temperature Materials: Aluminum Protection : Inner Temperature control device protects again over heating Energy Transfer Ratio 98% Life span: 100000H Mounting: Wall mounted or ceiling mounted or free standing cable 3M with VDE certificate SIZES / POWER As mentioned four standard sizes, . Other sizes and powers are availabe in OEM production. Please send us your requirements and we design and quote your individual panel. Higher surface temperatures provide better efficiency rates .We offer our standard sizes with different powers/surface temperatures according to customers demand. INSTALLATION / USAGE ALL panels are ready to use and fast installation possible (all necessary tools included in standard packing). Mounting of panel possible in 5 minutes (plug in type, 3m power cable). All panels can be either wall or/and ceiling mounted. Furthermore, we provide accessoires for floor standing. Advantage: 1. Energy-saving It can be used together with temperature controller to form infrared radiant heating system. According to the temperature needs of the user, the temperature in each room can be freely adjusted. When the indoor temperature reaches the preset temperature, the heating system will automatically stop and the heat accumulator begins to emit heat so as to maintain the preset temperature for a long time, saving energy and power. 2. Environmenal protection Its energy is electricity so that is very evironmental. 3. Safety and comfortable It won't explode or emit odor, wind or noist. 4. Long life expectancy It can be used more than 20 years. 5. Health care The heat radiant can change body microcirculation, cell organization under skin producing resonance, clearing the barrier of microcirculation, adjusting and balancing nervous system promoting metabolism, increasing body physical power. It is very good for your health. Size:60*2.5*120cm,inner carton size:65.5*5.5*125.5cm
* anodized extruded aluminium alloy frame * high efficiency carbon fibre heating element * power: 1400w * 4 metres power supply cord * tempered glass table top: d=50cm * stainless steel base cover: d=40cm * height: 75cm * led lighting * 360 degree tip-over safety switch * ip24 approved Product size 500x500x750mm
Cast aluminum heating loop is a kind of electric heater, using tubular electric heating elements and a high-grade aluminum alloy shell, with a general operating temperature of 150 to 450 degreesc. It is applicable to plastics machinery, die heads, cable machinery, and equipment in chemical, rubber, and petroleum industry, etc. Cast aluminum heater is featured by long service life, excellent heat-insulating properties, outstanding mechanical properties, corrosion resistance, and magnetic reactance, etc. 1) customers shall provide product drawings or samples, if drawings or samples are not available, please provide specifications, models, voltage, and power, etc. Of the products. 2) power handling of the surface of cast aluminum heater is 2.5--4.0watts per square cm. Use instructions, Use instructions 1) the working voltage shall not exceed the rated value by 10 percent, 2) the wiring part shall be outside the heating layer and insulating layer, the shell shall have effective grounding, 3) cast aluminum heating loop shall be placed in a dry place, if the insulation resistance is lower than 1megohm because it has been unused for a long period of time, please bake the resistance in an oven at 200 degrees c for 5-6 hours.
1)temperature can be adjusted. 2)the heater adopts ss heating tubes, warming up rapidly. 3)various kinds of stainless steel or carbon steel electric water tank heaters are adoptable according customers' requirements. As to small machine, we will package it with wooden cases, as to large machine, we can use safe deliver by bulk cargo ship.
Asphalt heater is characterized by rapid heating, uniform heating, environmental protection. The power can be customized according to special requirements. As to small machine, we will package it with wooden cases, as to large machine, we can use safe deliver by bulk cargo ship.
Air duct heater is mainly used to heat up the air in the airduct, can be classified into three types by high temperature, medium temperature, low temperature.The common ground on the structure is adopting steel plate to support the heating tube, in the purpose of decrease the shake of the heating tube when the fan stops.Overtemperature controller is installed in the junction box.The low temperature type air duct heater can be directly installed on the airduct, due to the differences from the structure, the medium temperature type and high temperature type electric air heater has a 100mm thick thermal insulation material layer between the duct exine and the junction box clamp, not only to decrease the whole duct external heat dissipation, but also bring down the temperature in the junction box. Characteristics 1.Heating tube adopts outer coiled ripple-type ss belt, which enlarges the heat dissipation area, thus, it greatly improves the heat exchange efficiency. ¡¡¡¡2.Professional design, low wind resistance, uniform heating, no high temperature or low temperature blind angle. ¡¡¡¡3.Duplex protection, good safety performance.Temperature controller and fuse protector are installed, which can be used for controlling the heater operates normally under the condition of overtemperature and without wind, thus, to guarantee not a single miss in a ten thousand times. As to small machine, we will package it with wooden cases, as to large machine, we can use safe deliver by bulk cargo ship.
Silicon rubber electric heating plate is mainly consists of nickel-chromium alloy heating wire and silicon rubber high-temperature insulation cloth. It has advantages of short heating time, uniform temperature, high thermal efficiency, high strength, convenient operation, long service life (4 years), and slow aging. Generally, the output power range is 0.4-0.8w/cm2. Since the output power varies with different installation and temperature regulation conditions of the heating sheet, please contact with us when placing an order. Technical parameters 1. Highest temperature resistance of insulation material: 250 degreesc 2. Highest service temperature: 250 degreesc 3. Insulation resistance: 5 m ohms 4. Compressive strength: 1500v/5s5, power deviation: +/-8% 5. Damp resistance: end face plates are used for basic damp proofing, the product will be out of use, after being placed in water or covered with frost for a long period of time.
