Jacobs 70 is a Self Fusing Electrical tape made of premium grade Silicon Rubber. It is an ideal tape for insulation protection in the power industry. Suitable for voltage upto 35kv and can work continuously at H Class high temperature 180OC. The tape has good insulation, moisture resistance, flame retardant and sealing property. Sizes : Thickness : 0.3mm, 0.5mm and 1mm length : 9.15mtrm, 10mtr and 15mtr Width : 25mm, 50mm (Customize size is possible) Product Features: High Temperature Resistance : -55OC to 250OC Excellent Insulation, Ozone, UV and Aging Resistant. Easy to install by hand, No need heating and special tools. Flame retardant Application: Insulation protection for substation, bare parts of the power plant and bus-bar in main network. Insulation protection for any shape of electrified body. Insulation & fireproof for large cables and irregular shape conductor Technical Parameters: Elongation at Break : 500% Flame retardant : UL 94- VO Dielectric Strength : 30kv/mm Fusion : 1.63kg/25.4mm Emergency overload temperature : 300OC Tensile Strength : 7.6MPa
Jacobs 40A, Semi conducting tape is made of low resistivity EPR material. They are non vulcanized stable conductivity and shelf stable with excellent physical and electrical properties. It can uniform electric field and reduce electric field stress under high electrical field. Size : Width :19mm,. 25mm, 38mm and 50mm Lenght : 3m, 4m, 5m and 6m Thickness : 0.76mm *Size can be available as per customer request. Product Features: Maintain the conductivity after stretched without damaging the conductivity. No need heating, special tools, self amalgamating. Easy to stetched, good comfomality on the irregular surfaces Good compatibility on various cables and conductors Weather resistance, UV and Moisture resistance, Aging Resitant. Application range: 1) Uniform electric field and reduce electric field stress under high electical field. 2) Extension of cable shield above 5kv 3) As a shield for solid dielectric insulated cable. 4) Repair semi conductive layer of cable and joint.
Black velcro 16 mm in rolls of 25 running meters packed in boxes of 60 rolls each.
We are a manufacturer of wide range of tapes such as industrial use, goods packing use, self-adhesive tapes and so on. Those goods are mainly being produced on OEM base.
Shenzhen Dowell Adhesive Products Co.,Ltd Product introduction: High temperature polyester tape, high temperature tapes are made from PET as backing material, then coated with high temperature resistance of silica gel, the overall heat resistance can reach 220�¢?? Celsius for 30 minutes, has good high temperature resistance, electrical insulation, chemical resistance, high adhesion, soft break and no residue leaving again to tear away from features such as widely used in circuit board dipping process, protection of circuit board, to prevent the plating solution and pollution, easy tear up, no adhesive residue, good ductility, friction resistance, good adhesive tape is the PCB protection.
SRST-151 Electrical Tape is a high quality insulation tape produced from a polyester film that is coated on one side with a Acrylic adhesive. The result is a 0.058mm tape which exhibits excellent conformability and good electrical strength. Polyester Film tape is typically used as layer or coil cover insulation in applications where temperatures will not exceed 130 C. This tape is varnish resistant
Tapes
Tapes
Tapes
Tapes
Tapes
Tapes
Polyimide Film is produced by cast method, which has high temperature resistance, resistance to radiation and excellent dielectric properties. It is applicable to electrical insulating of the class H electric motor and other electrical equipments, and other use electrical insulating materials.
DESCRIPTION Scapa 2517 is an insulating, self amalgamating tape based on EPR (Ethylene Propylene Rubber). Its colour is black. APPLICATIONS For jointing and repairing a wide range of solid dielectric power cables up to 69 kV. For insulation, waterproofing and protection of electrical components. PRODUCT BENEFITS 1) Excellent physical and electrical properties with a high degree of stability under conditions of use. 2) The tape amalgamates rapidly when applied under tension to provide a void free homogeneous wrapping, Compatible with a wide range of rubber and plastic dielectric cable insulation. These include polyethylene. 3) Excellent resistance to water and ozone. 4) The tape will remove cleanly when cut, allowing it to be used as temporary insulation or protection. 5) Service temperature: 40C to +100C. 6) Supplied in an easy to handle and apply tape form. The product is interleaved with a disposable plastic liner.
1. High temperature resistant, good insulation, high temperature protection without leaving residue. 2. Applied on JIG board, for MLCC silver dipping,copper dipping process. 3. For PCB gold plating masking protection. 4. Silicone realease paper splicing. 5. Spray coating and powder coating masking. 6. Multi colors available.
FOAM TAPE SINGLE SIDE / DOUBLE SIDE TISSUE TAPE
POLYKEN 930 is a cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping. The unique adhesive retains conformability over a wide temperature range, yet exhibits an elevated level of shear resistance, which is a key in-ground performance characteristic. Coupled with a pliable, very malleable polyethylene backing, this versatile tape system can be applied by hand or with a wrapping machine. Ordering Information POLYKEN 930 coating tapes are in roll form. Eg.: POLYKEN 930-35 BLK 4"Ã?50' Total tape thickness:35mils(0.89mm),50mils(1.27mm) Tape width :2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) Tape roll length:50ft(15M),100ft(30M)
POLYKEN# 934 is a cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping. The highly conformable backing and thick, aggressive adhesive also make it the ideal repair system for all types of main line coatings. The POLYKEN# 934 tape with very tacky adhesive has a release plastic liner to enable proper unwinding of the roll. Total tape thickness:40mils(1.016mm),50mils(1.27mm),60mils(1.524mm),65mils(1.65mm) Tape width:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) Tape roll length :33ft(10M),50ft(15M),100ft(30M) Color: Black ,White
The POLYKEN® 942&955 System is a multilayer coating system designed for the corrosion protection of pipelines operating in highly corrosive environments and exposed to high mechanical stresses that may be present particularly on large diameter pipes. The system consists of POLYKEN®1027 liquid adhesive, POLYKEN® 942 three-ply anti-corrosion inner layer and POLYKEN® 955 mechanical outer layer and is fully certified to the DIN 30672 and EN12068 standards. The 3-ply adhesive system produces a strong cohesive bond to the primed steel surface, at the spiral overlap and to the mechanical outer layer. The tough mechanical properties of the outer layer provide protection to the pipes during handling and installation. POLYKEN942-32 4"Ã?100' Total tape thickness:32mils(0.8mm) Tape width :2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) Tape roll length:50ft(15M)100ft(30M),200ft(61M) Color : Black
System Description The POLYKEN 980,955 is a multilayer system used for the protection of steel pipelines. POLYKEN 1019,1027 Liquid Adhesives can be used as primers for this system. In addition to serving as primers, these liquid adhesives themselves represent an anticorrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe. They are designed for machine or brush application and formulated with stress-corrosion cracking inhibitors. The Anti-Corrosion layer POLYKEN 980 is engineered to assure a high bond to the primed surface with excellent conformability characteristics. The mechanical protection layer POLYKEN 955,achieves a complete bond to the POLYKEN 980 inner layer, providing maximum handling and in-service protection for the coating system. The adhesives in these and all POLYKEN tape systems contain proven anti-microbial additives. The POLYKEN 980/955 can also be used for ductile iron pipes, in this case the use of POLYKEN 1027 primer is recommended. Ordering Information POLYKEN 980 and 955 coating tapes are in roll form. Eg.: POLYKEN 980-20 BLK 6"Ã?400' POLYKEN 980 Product Model No. Standard ordering options 20 Total tape thickness in mils 15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) BLK Tape backing color Black (BLK) 6 Tape width in inches 2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) 400 Tape roll length in feet 100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M) Eg.: POLYKEN 955-20 WHI 6"Ã?400' POLYKEN 955 Product Model No. Standard ordering options 20 Total tape thickness in mils 15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) WHI Tape backing color White (WHI) 6 Tape width in inches 2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) 400 Tape roll length in feet 100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M) **Special Roll Size can be customized .
