BOPP tape.
Bopp packing tape, stretch film, stationery tape, double sided tape.
Network tap, copper tap, aggregation tap, fiber tap.
Masking tape.
Adhesive tapes.Manufacturer, OEM
Gum tape, printed tape.
Hot melt BOPP tape.
Adhesive tapes.
BOPP self adhesive tapes.manufacturer
BOPP self adhesive tape.
These film capacitors are designed for DC-link and coupling/filtering for inverter, industrial & high-end power supplies and Solar inverters Features: -Double sided metallized polypropylene structure -Low loss and small inherent temperature rise -Excellent active and passive flame resistant abilities -Negative temperature coefficient of capacitanceThese film capacitors are designed for DC-link and coupling/filtering for inverter, industrial & high-end power supplies and Solar inverters
Description PE film, or polyethylene film, is a type of plastic film made from polyethylene. Polyethylene film is odorless, odorless, non-toxic and translucent. It is the most widely used polymer material in the world today. It does not react with moisture, grease, compounds, etc., is insoluble in most solvents at room temperature, and can withstand low temperatures of -70 �° C. Good weldability, good transmittance to oxygen and carbon dig aside, and poor permeability to water vapor. Type PE film is based on special polyethylene (PE) plastic film and is divided into high-density polyethylene protective film, medium-density polyethylene film and low-density polyethylene film according to different densities. 1. Low-density polyethylene (LDPE), the density of about 0. 92g/cm2; low-density polyethylene film has good transparency and heat sealing, can be waterproof and moisture-proof; but the tensile strength is low, the tensile elongation is large, and it is easy to wrinkle; 2. Medium-density polyethylene (MDPE), the density is about 0. 93ï½?0ï¼? 94g/cm2; the performance is between high-density and low-density polyethylene; 3. High-density polyethylene (HDPE), the density is 0. 94â??0ï¼? 965g/cm2; the heat resistance and mechanical strength of high-density PE film are better than those of low-density PE films, the tensile elongation is small, and the thickness of the film is generally above 0.03mm, but the transparency is poor. In general, as the density rises, the mechanical properties and barrier properties will increase accordingly, heat resistance, and raw. Polyethylene of the same density also has different properties between them due to different film-forming processes. Features PE film is lightweight and flexible, making it easy to handle and transport. It is resistant to moisture, making it suitable for use in damp or humid environments. PE film can be sealed or heat welded to create a watertight barrier, making it useful for packaging applications. It is also resistant to UV radiation and can be used outdoors without degrading. PE film is generally very strong and can withstand high levels of stress, making it suitable for use in a variety of applications. It has excellent mechanical strength, dielectric and moisture resistance, and can maintain softness and chemical stability at low temperatures. Applications PE film is often used in our lives, such as computer shell surfaces, screen surfaces, LED display surfaces, instruments, glass plate surfaces, etc. PE film is commonly used in packagings, such as for food, beverages, and consumer goods. It can be used to wrap or cover products to protect them from moisture, dust, and other contaminants.
Double Sided Transparent Pet Film Tape This kind is a transparent, double-sided self-adhesive tape used transparent PET film as backing and double sided coated with solvent acrylic adhesive. Features: Good aging resistance and shearing resistance,has super process performance with high temperature resistance. Very thin has excellent handling performance in converting processes Good bonding strength to most common, smooth, even substrates,like plastic/ABS. Suit for electronic die-cutting. Double Sided Transparent Pet Film Tape Application fields: Mounting of metal,plastic,internal parts of LCD modules. Mounting of foam or other cushioning materials. Battery pack mounting. Double Sided Transparent Pet Film Tape Double sided tape suppliers Product construction: Backing material Transparent PET film Type of adhesive solvent acrylic Total thickness 0.03mm/0.05mm/0.08mm/0.1mm/0.12mm/0.15mm/0.2mm Color Transparent Release liner White paper/Yellow glassine paper
Double Sided Pe Foam Tape Foam tape consisting of a PE foam backing and an acrylic adhesive. Features especially: High initial and ultimate adhesive strength. Conformable foam backing to compensate design tolerances or uneven surfaces Excellent temperature resistance performance Excellent sealing and shock adsorption. Double Sided Pe Foam Tape Application fields Permanent mounting of emblems, scriptings; Single letters or labels for cars; Pasting and fixing for car door edges,interior trim panels,water guide strips Double Sided Pe Foam Tape Pe Foam Tape Double sided tape suppliers Product construction: Backing material PE foam Type of adhesive solvent acrylic Total thickness 0.3mm/0.5mm/0.6mm/0.8mm/1.0mm/1.2mm/1.5mm/2.0mm/3.0mm Color Black/white/gray Release liner Red/blue/green/yellow/white film;white paper
Foam tape consisting of a PE foam backing and an acrylic adhesive. Features especially: High initial and ultimate adhesive strength. Conformable foam backing to compensate design tolerances or uneven surfaces Excellent temperature resistance performance Excellent sealing and shock adsorption. Application fields Permanent mounting of emblems, scriptings; Single letters or labels for cars; Pasting and fixing for car door edges,interior trim panels,water guide strips, Product construction Backing material PE foam Type of adhesive solvent acrylic Total thickness 0.3mm/0.5mm/0.6mm/0.8mm/1.0mm/1.2mm/1.5mm/2.0mm/3.0mm Color Black/white/gray Release liner Red/blue/green/yellow/white film;white paper
Self-Adhesive Bituminous Waterproof Membrane, its basement is made from SBS elastomer compound, good road bitumen and adhesion-promoting resins, its upper side is faced with PET Film, PE Film, aluminium foil or silicone-coated film, its bottom side is removable silicone-coated film. 1.Reliable application performance: its adhesion, water resistance, airtightness, high and low temperature resistance are excellent,and dimensional stability is good. 2.Stable chemical properties: excellent chemical resistance, weather resistance and corrosion resistance. 3.Excellent mechanical properties: high bond strength, high tensile strength, good elasticity and extension properties, strong adaptability to interface deformation and cracking, and excellent follow-up to the deformation of objects. 4.The construction operation process is simple. THICKNESS: 1.5MM, 1.2MM. 1.0MM WIDTH: 5CM-20CM LENGTH: 2M-20M ISO, CE
Self-Adhesive Bituminous Waterproof Membrane, its basement is made from SBS elastomer compound, good road bitumen and adhesion-promoting resins, its upper side is faced with PET Film, PE Film, aluminium foil or silicone-coated film, its bottom side is removable silicone-coated film. 1) Replacement or repair of flashing 2) Extensions, porches, window frames and chimneys 3)Caravans and conservatories 4) Seals capping bolts and roof ridges 5) Guttering down pipes, skylights 6) Sealing parapets, valley gutters 7) Roof repair of portable building
Butyl tape is a kind of self-adhesive waterproof sealing tape which is made by advanced technology with butyl rubber as the raw material . It has strong adhesion to all kinds of material surface , at the same time it has excellent weather resistance ,aging resistance and waterproof , to the surface of the adhesive sealing ,shock absorption , protection and other function.
Self-Adhesive Bituminous Waterproof Membrane, its basement is made from SBS elastomer compound, good road bitumen and adhesion-promoting resins, its upper side is faced with PET Film, PE Film, aluminium foil or silicone-coated film, its bottom side is removable silicone-coated film.
Description Wallpaper adhesive is a high quality, easy to mix adhesive. It is easily spread with excellent slip properties for accurate positioning and longlasting results. Suitable for hanging all wallpaper types. Features â?? This product is made of natural cassava flour after gelatinization and modification, and added with water resistance additives. It has high adhesiveness and is not easy to hydrolyze after film formation. â?? It can be used in cold water. Its characteristic of dispersing first and then dissolving makes it difficult to form fish eye colloid under a large amount of powder. â?? Non-toxic, tasteless, easy to clean. â?? During use, the amount of water can be increased or decreased according to the characteristics of the material to control the adhesion. Application 1. Wallpaper adhesive. 2. Poster. Stamp adhesive. Precautions 1. If bubbles are generated during the mixing process, they must wait for the bubbles to disappear before they can be used on the material 2. The mixed colloid cannot be stored for too long, it is recommended to use it up within 3 days 3.If the colloid that has been stored for too long has a peculiar smell, there will be black hair and yellow on the side of the barrel or the surface of the colloid. It cannot be used and needs to be re-modulated Package 5kg/barrel (20L barrel. Plastic bag inside) 35kg/barrel (big blue barrel, lined with plastic bag)
