Tapes
Tapes
Tapes
Tapes
Polyimide Film is produced by cast method, which has high temperature resistance, resistance to radiation and excellent dielectric properties. It is applicable to electrical insulating of the class H electric motor and other electrical equipments, and other use electrical insulating materials.
DESCRIPTION Scapa 2517 is an insulating, self amalgamating tape based on EPR (Ethylene Propylene Rubber). Its colour is black. APPLICATIONS For jointing and repairing a wide range of solid dielectric power cables up to 69 kV. For insulation, waterproofing and protection of electrical components. PRODUCT BENEFITS 1) Excellent physical and electrical properties with a high degree of stability under conditions of use. 2) The tape amalgamates rapidly when applied under tension to provide a void free homogeneous wrapping, Compatible with a wide range of rubber and plastic dielectric cable insulation. These include polyethylene. 3) Excellent resistance to water and ozone. 4) The tape will remove cleanly when cut, allowing it to be used as temporary insulation or protection. 5) Service temperature: 40C to +100C. 6) Supplied in an easy to handle and apply tape form. The product is interleaved with a disposable plastic liner.
1. High temperature resistant, good insulation, high temperature protection without leaving residue. 2. Applied on JIG board, for MLCC silver dipping,copper dipping process. 3. For PCB gold plating masking protection. 4. Silicone realease paper splicing. 5. Spray coating and powder coating masking. 6. Multi colors available.
FOAM TAPE SINGLE SIDE / DOUBLE SIDE TISSUE TAPE
POLYKEN 930 is a cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping. The unique adhesive retains conformability over a wide temperature range, yet exhibits an elevated level of shear resistance, which is a key in-ground performance characteristic. Coupled with a pliable, very malleable polyethylene backing, this versatile tape system can be applied by hand or with a wrapping machine. Ordering Information POLYKEN 930 coating tapes are in roll form. Eg.: POLYKEN 930-35 BLK 4"Ã?50' Total tape thickness:35mils(0.89mm),50mils(1.27mm) Tape width :2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) Tape roll length:50ft(15M),100ft(30M)
POLYKEN# 934 is a cold applied tape coating system designed for the corrosion protection of field joints, fittings, and specialty piping. The highly conformable backing and thick, aggressive adhesive also make it the ideal repair system for all types of main line coatings. The POLYKEN# 934 tape with very tacky adhesive has a release plastic liner to enable proper unwinding of the roll. Total tape thickness:40mils(1.016mm),50mils(1.27mm),60mils(1.524mm),65mils(1.65mm) Tape width:2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) Tape roll length :33ft(10M),50ft(15M),100ft(30M) Color: Black ,White
The POLYKEN® 942&955 System is a multilayer coating system designed for the corrosion protection of pipelines operating in highly corrosive environments and exposed to high mechanical stresses that may be present particularly on large diameter pipes. The system consists of POLYKEN®1027 liquid adhesive, POLYKEN® 942 three-ply anti-corrosion inner layer and POLYKEN® 955 mechanical outer layer and is fully certified to the DIN 30672 and EN12068 standards. The 3-ply adhesive system produces a strong cohesive bond to the primed steel surface, at the spiral overlap and to the mechanical outer layer. The tough mechanical properties of the outer layer provide protection to the pipes during handling and installation. POLYKEN942-32 4"Ã?100' Total tape thickness:32mils(0.8mm) Tape width :2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) Tape roll length:50ft(15M)100ft(30M),200ft(61M) Color : Black
System Description The POLYKEN 980,955 is a multilayer system used for the protection of steel pipelines. POLYKEN 1019,1027 Liquid Adhesives can be used as primers for this system. In addition to serving as primers, these liquid adhesives themselves represent an anticorrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe. They are designed for machine or brush application and formulated with stress-corrosion cracking inhibitors. The Anti-Corrosion layer POLYKEN 980 is engineered to assure a high bond to the primed surface with excellent conformability characteristics. The mechanical protection layer POLYKEN 955,achieves a complete bond to the POLYKEN 980 inner layer, providing maximum handling and in-service protection for the coating system. The adhesives in these and all POLYKEN tape systems contain proven anti-microbial additives. The POLYKEN 980/955 can also be used for ductile iron pipes, in this case the use of POLYKEN 1027 primer is recommended. Ordering Information POLYKEN 980 and 955 coating tapes are in roll form. Eg.: POLYKEN 980-20 BLK 6"Ã?400' POLYKEN 980 Product Model No. Standard ordering options 20 Total tape thickness in mils 15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) BLK Tape backing color Black (BLK) 6 Tape width in inches 2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) 400 Tape roll length in feet 100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M) Eg.: POLYKEN 955-20 WHI 6"Ã?400' POLYKEN 955 Product Model No. Standard ordering options 20 Total tape thickness in mils 15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) WHI Tape backing color White (WHI) 6 Tape width in inches 2"(50mm),4"(100mm),6"(150mm),9"(228mm),12"(305mm)18" (457mm) 400 Tape roll length in feet 100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M) **Special Roll Size can be customized .
POLYKEN 980&955 Cold Applied Tape Coating System System Description The POLYKEN# 980,955 is a multilayer system used for the protection of steel pipelines. POLYKEN# 1019,1027 Liquid Adhesives can be used as primers for this system. In addition to serving as primers, these liquid adhesives themselves represent an anticorrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe. They are designed for machine or brush application and formulated with stress-corrosion cracking inhibitors. The Anti-Corrosion layer POLYKEN# 980 is engineered to assure a high bond to the primed surface with excellent conformability characteristics. The mechanical protection layer POLYKEN# 955,achieves a complete bond to the POLYKEN# 980 inner layer, providing maximum handling and in-service protection for the coating system. The adhesives in these and all POLYKEN# tape systems contain proven anti-microbial additives. The POLYKEN# 980/955 can also be used for ductile iron pipes, in this case the use of POLYKEN# 1027 primer is recommended. Ordering Information POLYKEN# 980 and 955 coating tapes are in roll form. Eg.: POLYKEN#980-20 BLK 6"Ã?400' -Tape Width : 2"(50mm),4"(100mm),6"(150mm),9"(230mm),12"(300mm)18" (450mm) -Tape Thickness : 15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) -Tape Length : 100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M) **Special Roll Size can be customized .
Polyken-980 Cold applied tape coating system for corrosion protection of Oil, Gas, Petrochemical, and Waste Water underground or overhead pipelines. The inner-layer tape shall be applied after the primer and before the outer-layer tape by hand or with a wrapping machine â?¡Structure The specification of the tape consists of two layers, adhesive layer and film backing Adhesive: butyl rubber Outer layer: Special blend of stabilized polyethylene III Features Excellent adhesion to pipe and self Resistant to UV Can be applied over a wide temperature range Good conformability and consistent uniform thickness Easily applied with no special equipment Compatible with common pipe coatings Excellent resistance to cathodic disbonding Meets ASTM D 1000 , EN 12068,AWWA C 214 Standard Cold applied
POLYKEN 980&955 Cold Applied Tape Coating System System Description The POLYKEN# 980,955 is a multilayer system used for the protection of steel pipelines. POLYKEN# 1019,1027 Liquid Adhesives can be used as primers for this system. In addition to serving as primers, these liquid adhesives themselves represent an anticorrosion layer and provide a uniformly smooth contact surface to promote high adhesion of the coating system to the pipe. They are designed for machine or brush application and formulated with stress-corrosion cracking inhibitors. The Anti-Corrosion layer POLYKEN# 980 is engineered to assure a high bond to the primed surface with excellent conformability characteristics. The mechanical protection layer POLYKEN# 955,achieves a complete bond to the POLYKEN# 980 inner layer, providing maximum handling and in-service protection for the coating system. The adhesives in these and all POLYKEN# tape systems contain proven anti-microbial additives. The POLYKEN# 980/955 can also be used for ductile iron pipes, in this case the use of POLYKEN# 1027 primer is recommended. Ordering Information POLYKEN# 980 and 955 coating tapes are in roll form. Eg.: POLYKEN# 980-20 BLK 6"Ã?400' -Tape Width : 2"(50mm),4"(100mm),6"(150mm),9"(230mm),12"(300mm)18" (450mm) -Tape Thickness : 15mils(0.381mm),20mils(0.508mm),25mils(0.635mm),30mils(0.762mm) -Tape Length : 100ft(30M),200ft(61M),400ft(122M),600ft(183M),800ft(244M) **Special Roll Size can be customized .
Butyl Rubber, or IIR, is an abbreviation for Isobutylene Isoprene Rubber with good chemical stability and thermal stability. The most prominent performance is the air tightness and water tightness.Its air transmittance is only 1/7 that of natural rubber, 1/5 that of styrene butadiene rubber, and the vapor transmittance is 1/200 that of natural rubber, 1/140 that of styrene butadiene rubber. Gas is even difficult to penetrate the material, not to mention water.Its outstanding weatherability, according to the relevant test data, can reach 120 high and -40 low. Report done by China's Building Waterproof and Zero Point Consulting Survey done says building waterproof leakage rate is as high as 90% in China. Many large enterprises have set up repairing departments. And in this process, the repairing products acrylate and butyl tapes are rapidly popular. 1. Flashing tape Waterproof:correctly paste butyl tape with roller compaction can be perfectly waterproof , because butyl tape is a pressure sensitive tape. 2. Waterproof tape Air tightness:The characteristics of butyl rubber determine that the air tight performance of butyl rubber tape is very good 3. Flashing butyl tape Reflective: The Flashing butyl tape can be used for the connection of reflective materials.Flashing butyl tape will not reduce the reflective performance of the material. 4. Butyl flashing tape Durability: Butyl flashing tape is an inert material with a service life of 50 years 5.Weather flashing tape Wide temperature range: Weather flashing tape can resist high temperature 120 , low temperature minus 40
High quality self-adhesive Aluminium lamination butyl tape caulk with waterproof and sealing performance on the surface of steel.Good connection for breathable membrane
high quality self-adhesive Aluminium lamination butyl tape caulk with waterproof and sealing performance on the surface of steel 9-44 Square Meters US$0,52 45-89 Square Meters US$0,51 >=90 Square Meters US$0,49 1 batch = 9 Square Meters Quantity: - 9 +Square Meters US$4,68 in total Shipping fee: Contact supplier for shipping cost to United States Lead Time: 5 day(s) after payment received Start Order Contact Supplier Add To Cart Samples - US$0,80 /Square Meter, 1 Square Meter (Min. Order): Buy Samples Payment: Overview Quick Details Place of Origin: Beijing, China (Mainland), Beijing, China (Mainland) Brand Name: PANZHU, PANZHU Model Number: BRT-AF Product Name: Flashing Butyl Rubber Tape Material: Butyl+aluminum Foil Thickness: 0.8mm-3mm Usage: Waterproof Projects Length: 10m or 20m/roll Sample: free Color: black Application: Used for construction joints Packaging & Delivery Selling Units: Multiple of Package size per batch: 40X26X29 cm Gross weight per batch: 16.73 kg Picture Example: package-img Lead Time : Quantity(Square Meter) 1 - 9 10 - 45 46 - 90 >90 Est. Time(days) 5 10 15 To be negotiated Aluminum Foil Flashing butyl tape uses high elastic aging resistant film coated with high quality butyl self-adhesive tape, with excellent aging resistance, high elongation, high peel strength, fast viscosity and other advantages.
Product type: baby diaper raw material OPP Frontal Tape Material: printed embossed nonwoven fabric Width: 190/200/210mm, or customized Length/Roll Diameter: 500m/34cm; 650m/39cm;1000m/48cm; 1500m/58cm, or customized Weight: 76mm Professional Service: Provide OEM & ODM Service Quality Systems: Factory and products passed FDA/SGS/BV/TUV certification. And we implement ISO 9001:2015 quality management system Usage: Frontal Tape ,used together with side tape for baby diaper closure system Sample: Free Sample Payment: T/T,30% deposits; 70% balance before delivery Delivery time: 7-15Days,according to your order quantity
Product type: baby diaper raw material PP side tape Material: CPP Width: 62mm or customized Length/Roll Diameter: 600m length, roll diameter 43cm Core Diameter: 76mm Weight: 40~50g/m² Professional Service: Provide OEM & ODM Service Quality Systems: Factory and products passed FDA/SGS/BV/TUV certification. And we implement ISO 9001:2015 quality management system Usage: Hook Side Tape ,used together with suede frontal tape for baby diaper closure system Sample: Free Sample Payment: 7-15Days,according to your order quantity