Talc stones from Afghanistan.
Product Detailed Description: Material - high-Iron talc-chlorite shale. Chemical parameters: Na20 - 2,38%, MgO - 24,91%, Al2O3 - 13,3%, SIO2 - 47,59%, CaO - 0,6%, Cr2O3 - 0,39%, Fe2O3 - 10,32%, NiO - 0,49% Mineralogical composition: Talc - 65%, Smectite - 25%, unidentified. phase (s) - 10% Shipment within 15 business days. SGS certification. Product origin: Ukraine. Packgaing details : Jumbo Bags, Bulk loose
Product Detailed Description: Material - low-iron talc-chlorite shale. Chemical parameters: MgO - 34,96%, Al2O3 - 6,76%, SIO2 - 57,47%, Fe2O3 - 0,82% Mineralogical composition: Talc - 80%, Clinochlore - 20% Shipment within 15 business days. SGS certification. Product origin: Ukraine. Packgaing details : Jumbo Bags, Bulk loose
Talc is a monoclinic mineral with a sheet structure similar to the micas. Talc has perfect cleavage that follows planes between the weakly bonded sheets. These sheets are held together only by van der Waals bonds, which allows them to slip past one another easily. This characteristic is responsible for talc's extreme softness, its greasy, soapy feel, and its value as a high-temperature lubricant. Applications: Talc is used as a filler in coatings, Pigment, dusting agent and extender in plastics, ceramics, paint, paper, cosmetics, rubber and many other products.
High quality Talc size 0 - 50mm can be supplied in in Jambo bags 1000 - 1200 Kgs further Specification upon request and Size can be customized as per customer requirements
Talc, common silicate mineral that is distinguished from almost all other minerals by its extreme softness (it has the lowest rating on the Mohs scale of hardness). Its soapy or greasy feel accounts for the namesoapstone given to compact aggregates of talc and other rock-forming minerals. Dense aggregates of high-purity talc are called steatite. Since ancient times, soapstones have been employed for carvings, ornaments, and utensils; Assyrian cylinder seals, Egyptian scarabs, and Chinese statuary are notable examples. Soapstones are resistant to most reagents and to moderate heat; thus, they are especially suitable for sinks and countertops. Talc is also used in lubricants, leather dressings, toilet and dusting powders, and certain marking pencils. It is used as a filler in ceramics, paint, paper, roofing materials, plastic, and rubber; as a carrier in insecticides; and as a mild abrasive in the polishing of cereal grains such as rice and corn.
Talc Crushed/Powdered White. 90-98%, $120-425USD Ton, Any Mesh (Food/industrial/cosmetic Grades) Very Competitive Rates QUICK DETAILS Product Name: Talc Powder/Meshed Loading Port: Bin Qasim Port / Karachi Port Grade: DIVERSIFIED (CONTACT FOR MORE DETAILS) Lead Time / Processing Time: 10 12 Working Days Incoterms (FOB / CIF): FOB MOQ: 25 Tons Supplying Ability: 1000 Metric Tons Packaging: On Buyers Preference 20-ft Container: 25 Metric Tons FEATURES: No Asbestos / High Whiteness Payment Terms: L/C & T/T Price: $120-450 USD Per Metric Ton Application: Diversified, contact for more details THE APW GROUP PAKISTAN is one of the fastest growing supplier & exporter of Talc Lumps within the country & abroad. We provide premium quality products at the most competitive rates. Our Labour are trained at such extent that they carefully sort out the product making sure its available in its purest form for our customers.
THE APW GROUP PAKISTAN is one of the fastest growing supplier & exporter of Talc Lumps within the country & abroad. We provide premium quality products at the most competitive rates. Our Labour are trained at such extent that they carefully sort out the product making sure its availalbe in its purest from for our customers. QUICK DETAILS Product Name: Talc Lumps Loading Port: Bin Qasim Port / Karachi Port Grade: A / A / B & C MIXED Lead Time / Processing Time: 8 to 10 Working Days Incoterms (FOB / CIF): FOB MOQ: 25 Tons Supplying Ability: 1000 Metric Tons Packaging: On Buyers Preference 20-ft Container: 25 Metric Tons FEATURES: No Asbestos / High Whiteness Payment Terms: L/C & T/T Price: $150-310 USD Per Metric Ton
Talc is the softest mineral filler used in the Plastics industry. It has high resistivity, low gas permeability, low abrasiveness, and high lubricity. Product Description : HS Code 252620 Price of product ( USD price or FOB price) Price depend on Grade 1 or Grade 2 Payment Terms : Advance or Mixed Delivery Time : Shipment within 15 working Minimum one 20 ft container order. Thanks
Talc Lumps And Powder
Hello World, Talc Powder or crushed or Natural Steatite Bakhtawar Industries and Desea Traders are working in partnership to mine and deliver high Quality Talc worldwide. Our offices are in Karachi and Melbourne. We guarantee high quality Talc regular supplies. We have Talc available upto 95 % whiteness as well as grey.
Talc is a purified hydrated magnesium silicate widely used as a dissolution retardant in the development of controlled release products. Talc is also used as a lubricant in tablet formulations in a novel powder coating for extended-release pellets and as an adsorbent. Talc is additionally used to clarify liquids and is also used in cosmetics and food products mainly for its lubricant properties. For - Pharmaceuticals & Cosmetics Industry Grade - BP / USP
Our company for very different mineral product line (kaolin, manganese dioxide, talc, sepiolite, zeolite, graphite) is producing or has supplied and are one of the leading firms in Turkey on this issue. According to the "Mohs scale", which classifies the substances in the world with 10 degrees according to their hardness and where human nails have a hardness degree of 2.5, talc is at the 1st degree and earns the title of the softest mineral known. Classified by mineralogists as "knife cut-sectile", talc has the formula Mg3 Si4 O10 (OH) 2 and is called "magnesium silicate hydroxide". Talc with a specific weight of 2.5-2.8 has a translucent-opaque appearance.
Modern uses of fuller's earth include as absorbents for oil, grease, and animal waste (cat litter) and as a carrier for pesticides and fertilizers. Minor uses include filtering, clarifying, and decolorizing; active and inactive ingredient in beauty products; and as a filler in paint, plaster, adhesives, and pharmaceuticals. It also has a number of uses in the film industry and on stage.
It is a mineral composed of aqueous magnesium silicate in chemical form: H2Mg3 (SiO3) 4 or .Mg3Si4O10 (OH) 2 Talc is the softest mineral according to the Mohs scale for hardness of minerals, and can be easily scratched with nails. Widely used as that powder.It is transparent to opaque. Its color ranges from white to gray or green and has a distinct waxy texture. Talc uses 1- It is used in medicinal preparations. 2- It is used as an insulator in electrical insulators. 3- It is used in welding wires. 4- Plastic and leather tanning industry. 5- Ceramic and Chinese industry. 6- Making pencils and rice bleaching. 7- Rubber and paper-making.
Located in Haicheng, Liaoning Province, China, talc factory has 15 years of experience in talc production.
Product Description : High Purity Talc Lumps HSN 25261020 Price of product ( USD price or FOB price) : FOB USD 120/MT - USD 300/MT Product origin : Haldwani, Uttarakhand, India Key Specifications/Special Features : L* : 90-98.50 Ry : 85-97 SiO : 59-61 MgO : 29-31 AlO : < 0.70 FeO : < 0.50 CaCO : < 0.70 Asbestos : Not Detected pH value : 8.5-9.5 LOI : < 6 Minimum Order Size and Packgaing details : Jumbo Bags, Bulk loose
Product Description : High Purity Talc Powder with good laminarity. Suitable for applications in Compounding, Talc Filled Master Batch, Pharmaceuticals, Paints HSN 25262000 Price of product ( USD price or FOB price) : FOB USD 350/MT - USD 450/MT Product origin : Haldwani, Uttarakhand, India Key Specifications/Special Features : L* (Min.) : 98.50 Y (Min.): 96 Median Size d(50) : 10-12 µm Top Cut d(90) : 25-30 µm SiO : 59-61 MgO : 29-31 AlO3 : < 0.70 FeO3 : < 0.50 CaCO3 : < 0.70 Asbestos : Not Detected pH value : 8.5-9.5 LOI : < 6 Minimum Order Size and Packgaing details : Packaging 25Kg/50Kg HDPE Bags, Jumbo Bags, other customised option are also available
Product Description : High Purity Talc Powder with good laminarity. Suitable for applications in Compounding, Talc Filled Master Batch, Pharmaceuticals, Paints HSN 25262000 Price of product ( USD price or FOB price) : FOB USD 300/MT - USD 400/MT Product origin : Haldwani, Uttarakhand, India Key Specifications/Special Features : L* (Min.) : 98.00 Y (Min.): 95 Median Size d(50) : 10-12 µm Top Cut d(90) : 25-30 µm SiO2 : 59-61 MgO : 29-31 Al2O3 : < 0.70 Fe2O3 : < 0.50 CaCO3 : < 0.70 Asbestos : Not Detected pH value : 8.5-9.5 LOI : < 6 Minimum Order Size and Packgaing details : Packaging 25Kg/50Kg HDPE Bags, Jumbo Bags, other customised option are also available
Product Description : High Purity Talc Powder with good laminarity. Suitable for applications in Compounding, Talc Filled Master Batch, Pharmaceuticals, Paints HSN 25262000 Price of product ( USD price or FOB price) : FOB USD 300/MT - USD 400/MT Product origin : Haldwani, Uttarakhand, India Key Specifications/Special Features : L* (Min.) : 97.00 Y (Min.): 94 Median Size d(50) : 10-12 µm Top Cut d(90) : 25-30 µm SiO2 : 59-61 MgO : 29-31 Al2O3 : < 0.70 Fe2O3 : < 0.50 CaCO3 : < 0.70 Asbestos : Not Detected pH value : 8.5-9.5 LOI : < 6 Minimum Order Size and Packgaing details : Packaging 25Kg/50Kg HDPE Bags, Jumbo Bags, other customised option are also available
