Multi-functional design, "-" screwdriver & silicon rubber tip are adaptd Quick, non-contact and accurate temperature taking Easy to use & carry: k/d design with rubber tip to avoid touching of heat Object Directly Battery capacity: displaying the battery capacity in square pattern Application: For remote racing car hvacr, engineering, automobile machinery, lab & Home users Response time: 1 second Emissivity: 0.95 fixed Update frequency: 1.4hz Wavelength: 5 to 14um Auto shut down: 15 seconds Operating temperature: 0~50°c (32 to 122°f) Storage temperature: -20°c to 65°c (-4 to 149°f) Power voltage: 3v Battery: lr44 x 2 Dimensions: o13.5 x 231 mm Weight: 72 g (includes batteries)
It is not just an individual working unit to turn On/Off Switch to DC12-48V LED Light 0-100% dimmer, but also a great media to join a smart system via RS485 Modbus-RTU comm. port. It means, no matter for simple group LED lights dimming/control or for complicated smart system control, LC-01 is the best choice in market. *4-channel designed led light dimmer and controller is using pwm dimming technology to direct drive led lights, 1~5% dimming no flash concern *each channel max load current 4a (4 channels total output power 768w@48v), with Protection design against overload, short circuit and surges *independent working unit, able to extend working units in series for more channels dimming and control demand *isolate rs 485 and modbus-rtu communication protocal able to connect with hmi tft Touch panel or smart control system like system chart 4 to dim lighting range from fully off "0" to full-on "1000" for different lighting mode and environment change setting *4-channel isolate multi-function digital input able to work with existing or general power On/off switch for light on/off and 0-100% brightness dimming and to connect sensor for On-off, detain or group dimming setting *wide working voltage 12-48v dc, to ensure stable and continued electricity supply for led lights to extend the working life of led lights, industrial power supply working source is recommended *extend ports for remote control or sensor for smart control system *watchdog function supported *easy installation and set up, cost-effective, low maintenance cost, long working life of led and environment protection
High accuracy for professional users 3 steps rotatable pobe: rotating in 3 steps of 0/90/180 degree angle 69mm blunt probe Lcd display with backlight Hold/max/min display Mini size: easy to carry and use Fast response time & auto power off °c / °f switchable Application: Professional-grade instruments for food and wine, hvacr, engineering, Automobile, Machinery, lab and home users Measurement range: -50 to 150°c (-58 to 302°f), thermistor Accuracy: ±0.5°c (-10 to 80°c ), ±1°c(-50 to-10, 80 to 125°c), ±1.5°c(125 to 150°c) Resolution: ±0.1°c/0.1°f Response time: 20 seconds Operating temperature: 0 to 50°c (32 to 122°f) Storage temperature: -20 to 60°c (-4 to 140°f) Dimensions: folded o14.2 x 170 mm (unfolded o14.2 x 300 mm) Probe shape: blunt probe o3.6 x 135 mm Weight: 58.2g (includes battery) Modes: hold/max/min Back light: 10 seconds Battery: aaa x 2pcs Auto shut down: 10 minutes
2-in-1 design: combine contact and non-contact type thermometer in one Piece 135mm needle probe 3 step rotatable prob: rotating in 3 steps of 0/90/180 degree angle Lcd display with backlight Hold/max/min display Mini size: easy to carry and use Fast response ime & auto power off °c / °f switchable Application: Professional-grade instruments for food and wine, hvacr, engineering, Automobile, Machinery, lab and home users Measurement range: contact type: -50 to 150°c (-58 to 302°f), Thermistor Ir0-n11: -33 to 110°c, ir0-n12: -33 to 250°c Accuracy: contact type: ±0.5°c (-10 to 80°c ), ±1°c(-50 to-10, 80 to 125°c), ±1.5°c(125 to 150°c) Irt: ±2.0°c of reading or 2.5°c whichever is greater Resolution: contact type: ±0.1°c/0.1°f Irt: 0.1°c/0.1°f ( 200°c) Response time: contact type: 20 seconds Irt: 1 second Emissivity: irt: 0.95 fixed Update frequency: 1.4hz Wavelength:irt: 1:1 optics ratio Operating temperature: 0 to 50°c (32 to 122°f) Storage temperature: -20 to 60°c (-4 to 140°f) Dimensions: folded o14.2 x 168 mm (unfolded o14.2 x 300 mm) Probe shape: needle probe o3.6 x 135 mm Weight: 66g (includes battery) Modes: hold/max/min Back light: 10 seconds Battery: contact type: lr44 x 2pcs Irt: lr44 x 2pcs Auto shut down: contact type: 10 minutes Irt: 15 seconds
No Coding Required! - Ergonomic Design - Alternate-Site-Testing (AST) Approved - Before/After Meal Modes - 400 Results in Memory - Ketone Warning - 6 Daily Alarms -blood sample size - Big Screen Display - Speaking Function (Option) in order
Antennas, connectors, patch antennas, cable assemblies, GSM, 3G, GPS, GPRS, 4G, LTE, YAGI, patch, power cords, automotive accessories, mobile phone accessories.
INTRODUCTION The BMB-EA001A/S is designed as a total healthcare solution. It is easy to operate and to carry on-the-go to get on with your daily life. PC Downloadable Results,Speaking fuction ,large LCD screen, simple interface, and automatic strip type detection make this product ideally designed for healthcare needs for a variety of users. FEATURE 1.Outstanding Accuracy & Precision 2.Speaking Function Available 3.No Coding 4.Works with GOD Based Test Strips 5.Alternate Site Testing Approved 6.Ketone Warning 7.Before/After Meals 8.Result in 5 seconds 9.USB Interface 10.400 results in Test Memory 11.Big Screen Display #For use only with BMB-BA002A Test Strips SPECIFICATION Measuring Range:20-600 mg/dL Test time:5 seconds Operation Temperature:50 - 104 F ( 10 - 40 C ) Operation Humidity:RH 15% - 85 % Storage Temperature:-4 - 140 F ( -20 - 60C ) Sample Size:0.3l Sample Type:Capillary whole blood Hematocrit Range:30 - 55 % Battery Life:More than 1000 times Display:LCD display (41 x 37 mm) Test Principle:Amperometric method Memory Capacity:400 measurement results Daily Alarm Function:6 sets Measurement Unit:mg/dL or mmol/l Analysis Method:Electrochemical Warranty:12 months Power Supply:AAA 1.5V x 2 Dimensions:64 x 95 x 29 mm Contents of BMB-EA127A 1. Meter 2. User's Manual 3. Blood Glucos Test Strips 4. Lancets 5. Puncturer (lancing Device) 6. Pouch 7. Battery
Elevator cab interiors, home appliances, electronics casing, interior panelling, pre-fabricated bathroom wall, office partition, ceiling panel.
Q Water Structure Core Technology Module Motorization.\Pipeline Grooving.\Process flexibility.\Quick connection.\Simplified Control. Q Water Function. It is easy to move, easy to install and can filter sea water, river water and ground water. Decentralized mobile ã?? Desalination ã?? Fresh water plants. 1.The system is easy to assemble in 20 mins by two persons. 2.The quality of effluent is conform to the drinking water regulations with high water turbidity 3,000 NTU) of influent. 3.The production is 15 m 3 /day in the small (2.5 m 3 space. It can provide clean water to at least 60 persons of community. more detail please visit our company website.
1.75 hp motor (option) W/6 window led computers w/body fat function Running belt: 1400*470mm Speed range:0.8~16km Power incline :12% Rapid buttons can aess your desired speed and angle of running deck quicky. User weight: 130kgs Assemble size: 1890mm*850mm*1415mm (lwh) Cuft: 17.3'/ctn N.W./g.W.: 85kgs/98kgs 20'/40'/40'hq: 63sets/126sets/140sets
Photon beauty Function: Anti-wrinkles ;energizing Balance skins and enhance blood circulation Prevent the formation of melanin pigment Firming your skin Smooth pocks and lighten scars Remedy acne and dermatitis Features: Infrared ray: reaching 10 mm deeply of your skins without medium Low power: do not need cooler medium Temperature control: warm and comfortable. Time setting: auto shut-off device (about 10 minutes) Buzzer: beeps when plugging, power on/off and auto shut-off Light weight: easy to carry and use in any time, any place Choice: for different kind of skins
Ultrasonic ACU-massager Specification: Frequency: 0.5MHz Mode: Pulsed Wave Treatment area: 3.8cm2 Switch: ON/OFF Timer setting: 10 minutes Auto off Dimensions: 50 x 45 x 190mm Weight: 200 g
Body fat analyzer Examine the weight, the percentage and the quantity of body fat Features: Operated by two 9V batteries. Simply controlled panel. Easily make out indications Specification: Frequency: 50KHz Power source: 12V rechargeable battery and adaptor Dimension: 66 x 176 x 208 mm Weight: 1.5kg
Bio beauty microcurrent Features: Microcurrent + massage + permanent magnet = rejuvenation Tone and firm your skin Soften scar Smooth your wrinkles and fine lines Renew your skin texture Accelerate draining the waste out. Help nutrition absorption Specification: Battery: 3.0v (um 3 x 2 x 2 ) Frequency:1-30hz adjustable Amplitude: max 5ma (500 [, load) Carrier frequency: 8khz Conductive material: conductive gel (water soluble) Dimension: 28cm x 3.5cm x 3cm Weight: 200g
Infrarex Effective and safe:provides pain relief without medication Fast: experience pain relief within 10-15 minutes Convenient: give yourself a treatment at any time you wish and as often as necessary Simple: it's simple and can be used right in home 110v/ 220v Unit with a spare bulb Specification: Voltage: 110v/220v Temperature switch: high/ low
Ultrasonic beauty High frequency ultrasound transmits into the skin surface to clean the facial dirt, remove the freckles and wrinkles Frequency:3MHz Mode: Pulsed Wave Treatment area: 3.8cm Switch: ON/OFF Timer setting: 10 minutes Auto off Dimensions: 50 x 45 x 190mm Weight: 200 g
Diagnostic devices & systems, electro-physical therapy devices, photon therapy devices, ultrasonic therapy devices, home health-care products, accessory, TENS, EMS, light therapy.
Auto control / Manual adjustment for desired direction: PAN and TILT are available Special screw terminal-detachable connector easy for installation 1pc/box, 20pc/2.3'
Sudden light should consistently light up for 45 seconds to shut off Infrared Color at daytime. Under low illumination or at nighttime, infrared activated immediately and system automatically switched to B/W Burst signal is switched off while shifting to B/W at nighttime Auto electronic shutter High sensitivity Project distance 30M 1pc/box, 20pc/2.72'
Allow a single monitor to display the output for one to eight cameras in automatic or manual sequence Each camera can be positioned in areas where user wants to surveillance The scene from each camera is displayed on the monitor for an operator-selected dwell time from 1 to 35 seconds. Green led lamps indicate the position number of the camera output bring viewed. Unused camera positions may be bypassed without changing the order of sequence or dwell time Designed to meet the needs of the small, basic closed-circuit video system user Housed in a heavy-gauge steel chassis and cover protected by an off-white textured baked enamel finish CV-123-8A is with Audio 1pc/box, 10pc/2.3'
