Taipei Waterproof Safety Matches Suppliers and Manufacturers

1- Designed to protect the eyes from the flying objects. 2- Comes with anti-scratch lens, high impact resistance and 99.9% UV radiation block out. 3- Good for protection again dust and impact. 4- Used for construction, gardening, maintenance, sporting, biking, surgery and laboratory etc. 5- Black frame, yellow lens Frame: Nylon, length & angle adjustable. Lens : Polycarbonate, yellow, anti-scratch. Lens options : Clear, Grey, Amber, Blue, Green, Silver Coating, Blue Mirror Coating etc. Lens with ANTI-FOG coating is available (optional) Standards : ANSI Z87.1 approval

1- Designed to protect the eyes from the flying objects. 2- Comes with anti-scratch lens, high impact resistance and 99.9% UV radiation block out. 3- Good for protection again dust and impact. 4- Used for construction, gardening, maintenance, sporting, biking, surgery and laboratory etc. 5- Black frame. Frame: Polycarbonate & Nylon, length & angle adjustable. Lens : Polycarbonate, clear, anti-scratch. Lens options : Clear, Grey, Amber, Blue, Green, Silver Coating, Blue Mirror Coating etc. Lens with ANTI-FOG coating is available (optional)

1- Designed to protect the eyes from the flying objects. 2- Comes with anti-scratch lens, high impact resistance and 99.9% UV radiation block out. 3- Good for protection again dust and impact. 4- Used for construction, gardening, maintenance, sporting, biking, surgery and laboratory etc. 5- Black frame. Frame: Polycarbonate & Nylon, length & angle adjustable. Lens : Polycarbonate, clear, anti-scratch. Lens options : Clear, Grey, Amber, Blue, Green, Silver Coating, Blue Mirror Coating etc. Lens with ANTI-FOG coating is available (optional)

Description PU-850 is a one component, thixotropic, polyurethane waterproofing membrane where viscosity of the liquid is paramount. In applications such as sloped roofing, flashing details and under tile waterproofing PU 850 cures to form a durable yet elastic membrane with strong adhesion to many types of substrates. PU 850 is fast curing, and is tack-free in less than two hours, with exceptional elasticity. Due to it thixotropic, hydrophobic and elastomeric nature, PU 850 is the perfect solution to provide excellent waterproofing on vertical and sloped surfaces without running. Use - Shower Recesses - Bathrooms - Laundries - Kitchens - Balconies - Retaining Walls - Planter boxes - Steel (suitably primed) - Patios - Plasterboard - Courtyard Areas - Brick - Concrete, Cement render, plaster - Wet area wall lining board - Hardie/CSR sheet flooring - Light weight aggregate block Feature â?¢ Easily applied onto vertical and sloped surfaces with no running OR bubbling. â?¢ Excellent adhesion to most substrates. â?¢ No thinning required. â?¢ Excellent thermal resistance, never turning soft. â?¢ Excellent cold resistance, remaining elastic to -40â?°c â?¢ No accumulation of humidity under coating â?¢ Excellent mechanical properties â?¢ Highly stable, will not bleed through porous materials â?¢ Bitumen free â?¢ Highly elastic and stable. Packaging 15 Litre pail Consumption 1.2~1.5kg/m�² Shelf Life Unopened pails can be stored for up to 12 months in a cool, dry and weatherproof environment.

DESCRIPTION CP-320 is a fast-curing, two-component, bitumen-extended polyurethane fluid. It produces a highly elastic membrane with strong adhesion to many types of surfaces and excellent mechanical and chemical resistance properties. FEATURE Components easily mixed, fast curing Its low modulus gives it excellent substrate crack-bridging properties Excellent adhesion on almost any surface Excellent thermal resistance, max service temperature 80 Resistance in the cold: Film remains elastic even down to -40 Good chemical resistance Can also be used as a joint sealant APPLICATIONS Bathrooms, balconies, basements and rooftop Gypsum and cement boards Light roofing made of metal or fibrous cement Non-potable water tanks Bridge platforms Cut-and-cover tunnels Irrigation channels PACKAGING A : 20LT B : 20LT

DESCRIPTION CA-002W(12) is an Acrylic Polymer emulsion, especially used to improve the physical properties of cement. After mixing grout with CA-002W(12) can increase water resistance and bonding strength. AREA OF APPLICATIONS * Repair Mortar for Concrete Areas * Industrial Flooring * Bonding Agent for New to Old Concrete * As Cement Grout Additive * Enhance adhesion strength of Mortar. PACKING & STORAGE 20kg per plastic pail. Please store in cool places and avoid direct sunlight.

DESCRIPTION CC-103(1K) Crystalline Waterproofing Materials is fusion resin powders which contains water-soluble crystalline mineral coating with special additive syntheses. It will have a protective coating which is firm and impact resistance after curing. CC-103(1K) is a high technology product to prevent water leakage. ADVANTAGES * Prevent the constructions aging phenomenon * Avoid the leakage and mold on the wall * Effective against negative water pressure * With good stability * Non-Toxic APPLICATION * Internal and external walls * The leakage of inner wall in basements or the protection against negative water pressure * The construction of base isolated structures * Reservoir; drinking water pool * Contaminated water pool; water storage tank PROCEDURE 1. Ensure all surfaces which CC-103(1K) will be applied are clear. 2. Mix one pail(22.5KG) of CC-103(1K) and 4.5~5.0Liter water well by construction mixer. 3. Wait for 3-5 minutes and stir before use; use finishing trowel to smoothing or apply evenly with a nap roller. 4. Use finishing trowel to smoothing after using spray machine. PACKING 22.5KG per pail. STORAGE 6 months in original container stored in dry conditions. LIMITATION The crystalline products need to be used between 4 °C ~ 32 °C when applied.

DESCRIPTION CP-310 was synthesized from imported high-technology macromolecule resin and specialized paint that is different from general acrylic resin. CP-310 is a perfect product to provide a high water-tolerant, climate-tolerant, and anti-UV ability. FEATURES * Excellent environmental water-based waterproofing paint * Water-based, Non-toxic, odorless, inflammable, and harmless * Fine adhesion, extreme toughness, high elastic, and high endurance * Hydrophilic, and may be applied on damp surface USE RoofBuilding, condominium, factory, barracks, school, garden and etc.. WallsBasement wall , exterior wall , and etcâ?¦ PREPARATION 1. (The following steps are recommended for best results) 2. New concrete must cure for a minimum of 30 days 3. All holes or cracks must be properly patched 4. All surfaces must be clean and free of dirt, dust, efflorescence and oil APPLICATION (The following steps are recommended for best results) 1. Stir well before use. Do not thin; however, if thinning is necessary, thin water at a rate of no more than 10% 2. One prime required CP-310 primer 3. Two coats are required for the best resultskeep the thickness of each coating below 1m. 4. Wait for each coating to be total dry before overlaying the next coat. The interval time between each coating is minimum of 8 hours. COVERAGE 5-gallons about 33m2 COLOR Grayã??Whiteã??ivoryã??Green DRY TIME Dries to touch in about 1-2days . Low temperatures or high humidity conditions will affect drying time. Full cure should be reached in 14-30 days. CLEAN UP 1. Clean hands and tools with soap water. 2. After 30 days or paint has fully cured, areas may be wasted using a non-abrasive, mild detergent and cellulose sponge. WARNING (Read the following carefully for your own safety) 1. Keep out of reach of children-Do not take internally. 2. May cause eye, skin and respiratory tract irritation. May be harmful if swallowed. Use only with adequate ventilation.

DESCRIPTION CC-103(2K) Crystalline Waterproofing Materials is a capillary waterproofing formulation. CC-103(2K) has high permeability which crystallize and penetrate deeply into the capillaries of the concrete. ADVANTAGES * Applied to wet surface * Transparent, non-toxic and odorless * High cohesion and effective against positive/negative water pressure well APPLICATION * The leakage of inner wall in basements or the protection against positive/negative water pressure * Prevent seepage and leakage in underground passages and tunnels * Avoid the leakage of cisterns and pools PACKING 30KG/Set A: 22.5KG in powder.+ B: 7.5KG additive. COLOR Grey and white. STORAGE 6 months in original container stored in dry conditions and under 25°C.

1- Made of soft vinyl frame and high impact resistance polycarbonate lens 2- Also used as chemical splash goggle 3- Lens with or without anti-fog coating. 4- Allow to use with prescription glasses. 5- Color: Clear 6- Standard: CE EN166, ANSI Z87.1 7- Suitable for chemical factories, hospitals (flu), laboratories and painting houses where requires indirect ventilation on the goggle to get full protection to the eyes. 8- Also allowed to use as high impact goggle which is recommended for light-duty works such as gardening, cleaning and cutting etc.

1- Made of soft vinyl frame, comes with high impact resistant polycarbonate lens. 2- Frame with holes for air ventilation. 3- Lens with anti-fog coating is available (optional) 4- Allowed to used with prescription glasses. 5- Color : clear 6- Standard : CE EN166, ANSI Z87.1 7- Suitable for painting, gardening, cleaning, cutting and light-duty work where requires protection against dust and impact on the eyes.

1>. A5 size with 6-holes colored binder. 2>. Dimension of cover is 17.50 X 23.0 CM. Dimension of refill is 14.20 X 20.70 CM. 3>. The color of 6-hole binder is by plating not by spray paint. So, the color look more vivid as well as more durable. Color looks dull and easy to fade away if by spray. 4>. Color of the PU can be matched with the binder. 5>. The internal design/layout and the tab can be customized by the customer. 6>. We have at least more than thousands of colored changing PU in stock . So, customer could select color combination without considering the MOQ of the PU. For example, 1,000 PCS for 2 colors or 2,000 PCS for 4 colors. Low purchasing threshold of the material allows customers more flexibly design the color combination and diversify the market.

DESCRIPTION CA-055(W12) is an emulsion primer of water-based acrylic resin with excellent properties such as water resistance, pull-off strength and pore-filling ability etc. , especially used to improve the physical properties of cement. It can be mixed with water at any ratio. FEATURES *Excellent penetration into the concrete substrate to increase pore-filling ability and adhesion. *Reduced transport paths of concrete structure to enhance durability. *Excellent water resistance. AREA OF APPLICATIONS *Repair mortar for concrete areas. *Industrial flooring. *Bonding agent for new to old concrete. *As cement grout additive. *As water-based primer. *For making two component tile adhesives. *As adhesion aid for skim coat materials. PACKAGING 20kg Plastic Pails FLAMMABILITY Being water-base, it is non-flammable. CLEAN UP Tools and equipment can be easily cleaned up with cloth before drying.