Valve balls.
Auto lamp, body parts, engine parts, filter, bumper, fender, mirror, radiator, hood, suspension part, engine part.
Vehicle, motorcycle, farm machine, outboard engine spare parts, palm kernel shell.
Item no. :pv-010 Voltage rate:dc12v Power comsumption:4 watts max. Operating voltage Min. Operating voltage:8.5v Release voltage:1.6v Air flow:8l/min(-60kpa) Leakage rate10 cc/min(-86kpa Coil resistance:40.
Item no. :pv-012 Voltage rate:dc12v Power comsumption:4 watts max. Operating voltage: Min. Operating voltage:8.5v Release voltage:1.6v Air flow:8l/min(-60kpa) Leakage rate:10 cc/min(-86kpa) Coil resistance:40.
Pipes Shin nan casting factories have been producing quality cast iron pipes and fittings for potable water, sewerage and gas applications since 1955. With a total capacity of 80, 000 tons per year, shin nan's products include ductile iron pipes, fittings and valves conform to iso 2531, bs 4472, en 545, en 598, en969 as well as cns and jis standards. All shin nan's pipes, fittings and valves have the iso 9001-2000 quality assurance certificate as well as major international third party laboratory's approvals. Shin nan's state-of-art technology and equipments are located in two plants: yung kang factory and sun shine factory International standard for ocean transportation
Second hand cars, engines, scooters, tires, motorcycles, and other parts.
The GlobalTop Technology FGPMMOPA1 is one of the advanced GPS receiver module available with a finely tuned, high-sensitivity Patch on Top (POT) ceramic antenna utilizing SmartAntenna Structure. This POT GPS module is an ideal solution for those who wish to incorporate GPS functions into their own design without worrying about RF noise interference or any additional antenna fine tuning adjustment. It excels in tracking performances under urban landscapes or other environments where GPS signals can be difficult to acquire. FGPMMOPA1íªs design is powered by MediaTek Inc. (MTK) 32 channels chipset, the leading digital fabless semiconductor company for wireless communications and digital media solutions. This GPS module engine board has a very cost-effective design with excellent tracking performances, and ease of integrations; it is ideal for use in fleet-tracking device and those who wishes to plug-and-play GPS receiver module into their design! Feature: -Based on MediaTek Inc. Architecture -TCXO Design -Sensitivity: -158 dBm Tracking -L1 frequency, C/A code, 32-channels -Position Accuracy:
The GlobalTop Technology FGPMMOPA2 is an advanced GPS receiver module based on MT3318 single chip solutions, available with finely tuned, high-sensitivity Patch on Top (POT) ceramic antenna utilizing SmartAntenna Structure. This POT GPS module is an ideal solution for those who wish to incorporate GPS functions into their own design without worrying about RF noise interference or any additional antenna fine tuning adjustment. It excels in tracking performances under urban landscapes or other environments where GPS signals can be difficult to acquire. FGPMMOPA2íªs design is powered by MediaTek Inc. (MTK) 51 channels chipset, the leading digital fabless semiconductor company for wireless communications and digital media solutions. This GPS module engine board has a compact, cost-effective design with excellent tracking performances, and ease of integrations; it is ideal for use in fleet-tracking device, PND and those who wishes to plug-and-play GPS receiver module into their design! Feature: -Based on MediaTek Inc. MT3318 Solution -TCXO Design -Sensitivity: -158 dBm Tracking -L1 frequency, C/A code, 51-channels -Position Accuracy:
New features in gms-d1: Ultra-small form factor, 13 x 10 x 2.1 mm Ultra-high sensitivity, -165dbm L1 frequency, c/a code, 66-channels satellite searching Agps support for fast positioning (offline mode: epi valid up to 14 days) Dgps (waas/egnos/masa/gagan) support Multi-path detection and compensation E-gsm-900 band rejection E911 compliance Usb interface support High update rate, up to 10 hz Magnetic variation function support Low power consumption, low shut-down current consumption Rohs compliant.
Auto parts, crash parts, bumpers, car body parts, grille, spare parts, car parts, hood, fender, automobile parts, auto lamp, brake parts, brake pad, radiator, condenser, performance parts.
Compose of cip sprayer of liquid level control and vacuum device. - bottles loading & discharge The timing screw assures separate spacing. The bottles infeed and discharge through star wheels. The timing screw can be regulate to match thebottle diameter size. The star wheel is easy to be assembled and adjusted for correct positioning. - filling valve of cip device Not need to dismantle filling valve of cip device, have perfect cip action, which will enable filling valve to wash clean
Ductile iron pipes, fittings & valves.
The high thermal conductivity and electrical insulating featured materials ALNF (k up to 320 W/M.K theoretically) for the strong demanding applications in industry thermal management. The variety of different powder size (2, 5, 10, 20 um) and surface treatment are definitely meeting customers requirement in all aspects. Custom is welcomed. The ALNF extremely powder applications such aln substrate sintering, filler materials in thermal grease, mcpcb and epoxy for potting on power, chip epoxy molding compound package material , Epoxy potting in transformer coil bobbin. 25kg bottle, vacuum packed.
Hanks to inherent high conductivity ALN aluminum nitride, materials thermal conductive and electrical insulating TCPA 3030 series are ideally designed for replacement of heat sink and featured with electrical insulated properties for applications in power related industry.. Globaltop materials there are three models available now for different k selection: TCPA3020A, TCPA3025A, and TCPA3030A. Flame retardant and good for mold injection process. We also provide the consulting service for led bulb design in different power watt . 25 kg, industrial pack.
Stainless steel pipes, steel coils, plates, roller shaft parts, metal parts, reducer, gearbox, steam locomotive components removed and transportation-related equipment, slide, slider forgings, mold material, round bars, flat bars, standard modules, electronic parts, forgings, mold finished and semi-finished products, all kinds of gear and power parts, spacer pin with all kinds of valves products.
Thermal conductive and electrical insulated engineering plastic products (tcpa3030 sereis).Consulting on molding design, plastic injection, thermal simulation service
Lubricants like engine oil, gear oil, hydraulic, radiator coolant, brake fluid, ATF conditioner, gasoline treatment, diesel conditioner, engine flush.
Steam turbine blade, gas turbine blade, shaft of valve, valve, precision machining part, superalloy, high speed steel, alloy steel, functional stainless steel.
Auto engine bearings, tensioner & ilder pulleys bearings, auto electrical parts, auto lamps and lights, auto body parts.
