1. Solar Panel : 5.5V/300mA, FMonocrystalline Silicon 2. Input Power : AC100V--240V 3. Output voltage : 4.8V 5, D8V, B8, D4V, B9.0V 4. Maximum current output : DC460-800mA 5. Li-Battery capacity : 4200mAH Accessories list: 1. AC Adapter 1/PCS, 1000 2. USB DC Input charge cable 1/PCS, BMini USB output cable with 5P 1/PCS, BMini USB output cable 1/PCS 3. Adaptor: 10PCS(For IPhone/Blackmerry/ KUMA/MOTO/HTC/Nokia/etc). Carton/wooden box.
1. Content per set: Solar panel, energy-saving lamp, controller 2. Specification & Features: a. Solar panel : ( x 1) *Size: 992 mm (length) x 456 mm (width) x 33 mm (thickness) x 5.5 kg (weight) *Installation: inclination 15-20 degrees toward sunshine. facing south to obtain the best performance. *Life time: 5 years *Electricity: * 1 solar panel x 8 hours = 50 Watts * storage: 24 hours. Available for 3 days if used 8 hours per night *Storage battery: specification - DC 12 V, 50 AH, sealed lead acid battery b. Energy-saving lamp: ( x 1) *Specification of PL Street Lamp special type: DC 12 V, 18 W (= the brightness of 100 W ordinary AC lamp) *Electricity Consumption: 18 W for 10 hours = 0.018 kw X 10 = 0.18 kw/ h. *Life time: 5,000 hours under normal use c. Controller: ( x 1) Specification: DC 12 V, 8 AH 3. Remarks: Buyer shall by himself prepare lamp pole, sealed lead acid battery, ·X1.2 mm electrical wire for power distribution. The said items are not included in the package/ offer.
High performance and highly efficient combustion engine helps suppress PM generation. The combination of advanced technologies, such as regenerative DPF and BlueTec exhaust after-treatment system (urea SCR), achieves a high level of both fuel efficiency and environmental performance, with reduced CO2 emissions. In addition to 4WD, a low-floor makes it easy to get on and off. The Rosa with cold weather specifications such as a 10kw pre-heater standard.
Electric instant water heater.
Solar wafer, cell, module.
Duplex board, PVC, Gas heater, medical instruments.
Full line led packaged components, led mounts, led light pipes, led standoffs and pcb mounts. Led lamps, led through-hole lamp, led base lamp, outdoor-building lighting system, high power led, led module, led truck light, indoor led lighting system, solar lighting system, outdoor & indoor led display, high power street light, solar street light, solar traffic signals, solar road studs, solar panel.
Pv junction box, solar junction box, pv connector, solar connector, pv cables and cable assembly, solar cable and cable assembly, connection box, solar lighting system, pv inverter and controller, eva, aluminum frame, ribbon band, silicon glue.
PCM3-11 Male panel connector PCF3-11 Female panel connector Product Features & Benefits MC3 connector compatible Compatible to common drillings and mounting holes Low insertion/high withdrawal force High current capacity Low contact resistance Low temperature rise UV and ozone resistant TUV certified Fully complied with RoHS standard Made in Taiwan Technical Feature: Pin/Socket insulator Ø 3 mm Cable cross-section 2.5íp4 mm2 Rated current 20A Rated voltage 1000V Test voltage 6kV Contact resistance 0.5 mú[ Contact material Cu/Tin plated Overvoltage category/Pollution degree III/3 Insulation Material PA Degree of protection IP67 Safety class II Flame class UL94-V0 Insertion force/Withdrawal force í+50 N/í+50 N Connecting system Crimp connection Ambient temperature range -40íp+ 85óJ Upper limiting temperature 125óJ
Wheelchair, power wheelchair, mobility scooters, hospital bed, rollator, commode chair, shower bench, folding walker, crutches, walker stick, cane, oxygen tank cart, pedal exerciser, knee walke, shower trolley, electric wheelchair, shower bench, electric bed.
Alloy wire, steel wire, steel bar, welded steel wire mesh.
MJB-2 Junction box for standard PV module Product Features: -TUV certified -Product for crystalline solar module -Alternative connecting method for ribbon to contact rail : clip or soldering Technical Feature: Version:4 Contact Rails/2 Contact Rails Overall dimensions:102 x 63 x 22 mm (L x W x H) Rated voltage:1000V DC Rated current:25A Wire Size Range 2.5 - 4 mm2 Contact material:Copper, tin plated Insulation material:TPE/PPO Temperature range:-40íp+ 85óJ Protection class:Class II Degree of protection:IP65 Flame class:UL94-V0 Approval: TUV certified
PV Cable connector Product Features & Benefits: -MC3 connector compatible -Low insertion/high withdrawal force -Easy assembly for field installation -High current capacity -Low contact resistance -Low temperature rise -UV and ozone resistant -TUV certified -Fully complied with RoHS standard -Made in Taiwan Technical Feature: Pin/Socket insulator: Ø 3 mm Cable cross-section: 2.5íp4 mm2 Rated current: 20A Rated voltage: 1000V Test voltage: 6kV Contact resistance: 0.5 mú[ Contact material: Cu/Tin plated Connecting system: Crimp connection Overvoltage category/Pollution degre: III/3 Cable outer diameter: Ø 5.1íp6.4 mm Insulation Material: TPE/PA Degree of protection: IP67 Safety class: II Flame class: UL94-HB/UL94-V0 Insertion force: í+50 N Withdrawal force: í+50 N Ambient temperature range: -40íp+ 85óJ Upper limiting temperature: 125óJ
BC3-FMM Branch plug BC3-MFF Branch socket Product Features & Benefits MC3 connector compatible For safe and simple parallel or series-parallel connection of PV-modules High current capacity Low contact resistance Low temperature rise UV and ozone resistant TUV certified Fully complied with RoHS standard Made in Taiwan Technical Feature: Pin/Socket insulator: Ø 3 mm Rated current: 20A Rated voltage: 1000V Test voltage: 6kV Contact resistance: 0.5 mú[ Contact material: Cu/Tin plated Overvoltage category/Pollution degree: III/3 Insulation Material: PA Degree of protection: IP67 Safety class: II Flame class: UL94-V0 Ambient temperature range: -40í+ 85óJ Upper limiting temperature: 125óJ Insertion force/Withdrawal force: 50 N/í+50 N
PV-Cable Assemblies for Solar System
Solar Plus company would like to help the world fight against Coronavirus pandemic. We like to provide "NON thermal melting tape samples" for protective suit seam sealing. We understand there are material shortage in this Coronavirus crisis worldwide. For protective suit manufacturer willing to try out new tape for seam sealing, please feel free to contact us. We'll send out free sample for lab experiment. Hopefully we could make it through this tough time together. Yours sincerely Solar Plus company crew
Differential tape, Double side tape, Sandwich Tape **The thickness of film and adhesion coating can be custom made. Model: SDK578 Film Thickness: 50μm Adhesion (Kg/inch) : 0.9 Feature : Very thick for wrapping bumping chips 5 Layers Structrue: 50 μm Fluoride PET Release Film ------------------------------------------- Silicone Asgesive 95μm (A) ------------------------------------------- 50 Polymide Film ------------------------------------------- Silicone Asgesive 55μm (B) ------------------------------------------- 50 μm Fluoride PET Release Film **Polyimide, D/S silicone adhesive/Sandwich tape - DSK/SDK Series. High temperature resistant, able to go through reflow, re-usable. Optional two sides with different adhesion, multi-functional.
1. High temperature resistant, good insulation, high temperature protection without leaving residue. 2. Applied on JIG board, for MLCC silver dipping,copper dipping process. 3. For PCB gold plating masking protection. 4. Silicone realease paper splicing. 5. Spray coating and powder coating masking. 6. Multi colors available.
1. Used with UV light exposure (with certain wave length), the adhesion is greatly reduced (irreversible reaction), the object is then easily removed/ picked up after operation. 2. Polyolefin and Polyester films are mostly used. Good for dicing and heat resistant purposes. 3. Used in wafer grinding,chip dicing,MLCC cutting,LED or semiconductor dicing. 4. Available with anti-static.
1. High temperature resistant, good insulation, high temperature protection without leaving residue. 2. Applied on JIG board, for MLCC silver dipping,copper dipping process. 3. For PCB gold plating masking protection. 4. Silicone release paper splicing. 5. Spray coating and powder coating masking. 6. Multi colors available.
