High performance and highly efficient combustion engine helps suppress PM generation. The combination of advanced technologies, such as regenerative DPF and BlueTec exhaust after-treatment system (urea SCR), achieves a high level of both fuel efficiency and environmental performance, with reduced CO2 emissions. In addition to 4WD, a low-floor makes it easy to get on and off. The Rosa with cold weather specifications such as a 10kw pre-heater standard.
Machinery, wire & mesh machine, agricultural & garden tools, pipe fittings, thread roller, thread rolling machine and thread rolling dies..
Around 5~9 bloom a stem Grade b Inside: 80 blooms a box, 11~16 stems inside. Dimensions: 90cm x 34 cm x 10 cm
Pliers, jewellery tools.
1.The machine can be attached double spindle head and work efficiency can be more increased. 2.Both cutting TAP and forming TAP are suitable. 3.Fully automatic tapping process. One operator can easily operate several machines at the same time. 4.By using proper master pitch gears(change gears A and B pair), highly accurate thread can be tapped. It is easy and quick to change different size. 5.The length of the tapping stroke can easily be adjusted for high accuracy which is suitable for tapping blind hole parts. 6.It has safe device to monitor the feeding, torque, radial, and clamping to keep TAP's long life and ensure safe working job. 7.It governed by PLC. 8.It can install additional hopper to increase automatic working. 9.It can install additional sheet metal cover to gain more safety and reduce noise. 10.Pre-work parts auto-checking and machine auto-stop if abnormal.
Installed an isolated cooling fan in the interior of motor to dissipate heat. Make the machine can be operated continuously,steady and durable. The vertical column is enlarged (60mm),vertical column is solid and treated by tempering to get rid of stress, surface is chrome plated, wear resisting and no rust. High speed rotation continuously which can rotate 50 times/per Minute. Free to exchange tiny pitch. Quick and easy to change gear pitch and collet. Gear drives by one side teeth so won't have gap there. The rotation of gear is slow, so the gear won't get wear. Because one rotate one pitch, it can process perfect thread and prolong the TAPs life. The workpiece won't be lifted while the spindle retracting, so don't need to keep pressure on the workpiece, only need to avoid anti-rotation when tapping. This can simplify the fixture and make cost down.
Capacity: 0~3mm Speed: 0~11000rpm Voltage: 1ph, 100v~240v; 50/60Hz Table size: 100*70*8mm Non load motor: 670W 6.0A 1. Adopt with BOSCH main engine. 2. Available for chamfering steel, iron, casting iron 3. The operation is convenient, processing the stability.
Centerless grinding machine With high tolerance, accuracy and precission
Mini air compressor Specifications: -AC power: 95W -Max pressure: 40PSI -Weight: 4kg,1/8 HP -Electrical current: 0.6A -Capacity: 2.0CFM -Pressure regulator: Usually 25-30 PSI -Air conduit: 1/8NPT x 28 compatibale with Japan or U.S.A. made jet pens. 1 pcs/color box,26.5x13.6x21.2cm, 4pcs/ctn/1.3' Nw:17kgs, gw:18kgs
Green-Tak SUS 304 Gravity Water Filtration is composed of high quality 304 stainless steel housing and washable PVDF gravity membrane. The washable gravity membrane is certified by NSF, FDA, SGS and even verified by SUPER LAB that can remove V. Cholerae up to 99.98%. The gravity water purification is the most cost-effective, durable and excellent performance water purification system for river water, rainwater and other ground water to purify for daily domestic water use and even potable water. Features Durable 304 Stainless Steel Filter Housing. No power consumption, environmentally friendly. High Flow Volume. No wastewater. Washable and Easy maintenance by residents. High Filtration Performance. Long Term membrane and filters lifetime.
Green-Tak Rainwater Harvesting Water Filtration is durable and excellent performance water purification system for river water, rainwater and other surface water to purify for daily domestic water use and even potable water. The gravity membrane is NSF certified, FDA certified, SGS certified and even tested and approval by SUPER LAB for remove rate up to 99.98% for V. Cholerae and is the best quality gravity water filtration system. Features No power consumption, environmentally friendly. High Flow Rate Capacity. No wastewater. Washable and Easy maintenance by residents. High Filtration Performance. Long Term membrane and filters lifetime.
1st filter : spun pp 5u 2nd filter : u.D.F. 3rd filter : spun pp 1u 4th filter : r.O. Membrane cartridge 5th filter : post carbon ( t28 ) ----------- Mit booster pump; transformer ( 24v, 1.2a ) e. Standard brown kraft carton
Buder Alkaline Water Ionizer HI-TAQ7 (Made in Japan by Kyushu Hitachi Maxell) Certificated by TUV / ISO13485 / SGS ORP: Max.-1000mv Flow Rate: Max. 5.5L/minute PH: 2.7~10.5 Cleaning cycle: Each second automatic reverse cleaning for 1/50 second (3600times per hour). The Quick-Change replacement cartridge (Silver activated carbon combined with UF membrane 0.01um) (Made in Japan by Kyushu Hitachi Maxell) Lifetime: 12000liters Certificated by JIS / SGS.
Commercial R.O. System UEC & UEG series Output: 200~500gpd Size: w35 x d25 x h80cm.
Filter press Big
Reverse osmosis drinking water system with 5 stage Dimension:43x22x51 Weight:15 kgs
SEEDTEC YRG-06 Rotary Surface Grinder - Ram type with surface grinding diameter 600 mm, adopted Direct Drive spindle. Accuracy of Table surface 2 and Downfeed (minimum unit) 1. Vertical driven by AC servo motor. Cross and rotary table are driven by servo motor. Rotary table with constant peripheral velocity. Linear guide way with extra large block for vertical axis.
SEEDTEC YRG-06 Rotary Surface Grinder - Ram type with surface grinding diameter 600 mm, adopted Direct Drive spindle. Accuracy of Table surface 2 and Downfeed (minimum unit) 1. Vertical driven by AC servo motor. Cross and rotary table are driven by servo motor. Rotary table with constant peripheral velocity. Linear guide way with extra large block for vertical axis.
SEEDTEC NSG-618TS #SurfaceGrinder - Saddle type is mirror grinding with grinding capacity L x W: 470 mm x 150 mm, adopted Direct drive spindle. Accuracy of Table surface 2 and Downfeed (minimum unit) 0.1. Cross feed driven by simplified AC servo motor, Vertical axis driven by AC servo motor, Longitudinal by advanced table hydraulic design. 3 axes are box ways.
SEEDTEC APS-818P #SurfaceGrinder - Saddle type is fully auto-2/3 axis servo machine with grinding capacity L x W: 460 mm x 200 mm. Adopted Direct Dirve spindle. Accuracy of Table surface and Downfeed (minimum unit)1 Cross driven by servo motor and longitudinal driven by hydraulic. APS series linear guide way with extra large block for vertical axis and another two axes are box ways.
