Model No¡GM-188 UV Matt Varnish with specific molecular structure for paper coating industry. The performance of M-188 is equivalent to conventional UV varnishes, in some cases; the adhesion and scratch resistance are far more superior. Description M-188 is a UV Matt Varnish with specific molecular structure for paper coating industry. The performance of M-188 is equivalent to conventional UV varnishes, in some cases; the adhesion and scratch resistance are far more superior. Specification Appearance: Milky White Liquid Safety and Notes Storage: keep away from high temperature, high humidity and direct sun-light; keep tightly closed while storing. Product expiration: sealed, 12 months. Wear neoprene gloves and PVC chemical resistant suit and charcoal filtered mask to prevent direct contact and inhalation. If the skin is contaminated, wash with soap and water. If the slurry gets in the eyes, irrigate immediately with large amount of fresh distilled water or sterilize with 0.9% brine. Fire point: 102 (method: ASTM D92). Fire fighting material: foam or CO Package 20Kg plastic drum
Description Wallpaper adhesive is a high quality, easy to mix adhesive. It is easily spread with excellent slip properties for accurate positioning and longlasting results. Suitable for hanging all wallpaper types. Features â?? This product is made of natural cassava flour after gelatinization and modification, and added with water resistance additives. It has high adhesiveness and is not easy to hydrolyze after film formation. â?? It can be used in cold water. Its characteristic of dispersing first and then dissolving makes it difficult to form fish eye colloid under a large amount of powder. â?? Non-toxic, tasteless, easy to clean. â?? During use, the amount of water can be increased or decreased according to the characteristics of the material to control the adhesion. Application 1. Wallpaper adhesive. 2. Poster. Stamp adhesive. Precautions 1. If bubbles are generated during the mixing process, they must wait for the bubbles to disappear before they can be used on the material 2. The mixed colloid cannot be stored for too long, it is recommended to use it up within 3 days 3.If the colloid that has been stored for too long has a peculiar smell, there will be black hair and yellow on the side of the barrel or the surface of the colloid. It cannot be used and needs to be re-modulated Package 5kg/barrel (20L barrel. Plastic bag inside) 35kg/barrel (big blue barrel, lined with plastic bag)
Item Name: low-cut safety shoes Product Code: A001 Gender: For Men / Women Upper material: action leather Size: US 6.5~ US 12 Q'TY: 981prs
Item Name: low-cut safety shoes Product Code: A002 Gender: For Men / Women Upper material: action leather Size: US 6.5~ US 12 Q'TY: 1226 prs
Item Name: high-top safety shoes Product Code: B001 Gender: For Men / Women Upper material: nubuck Size: US 5.5~ US 12 Q'TY: 6780prs
Item Name: high-top safety shoes Product Code: B002 Gender: For Men / Women Upper material: full grain Size: US 5.5~ US 10.5 Q'TY: 2100prs
Item Name: high-top safety shoes Product Code: B003 Gender: For Men / Women Upper material: action leather Size: US 6.5~ US 12.5 Q'TY: 1515prs
Item Name: low cut safety shoes Product Code: A004 Gender: For Men Upper material: PU Size: US 5.5~US 9.5 Q'TY: 6009prs
in feed rolling screw ball rolling
SA-78NCE AUTOMATION CELLS ( CHAMFERING ) TUBE CUTTING IN-LINE High Tensile Steel The High Tensile Steel Tube is now widely applied in the global automotive market. In order to achieve higher fuel efficiency and lowering materials costs, thicker tubes and solid bars have been replaced by thin wall High Tensile tubes, which offer lower weight without compromising in strength and safety. With a much higher tensile strength (80~120 Kg/cm²) than conventional steels (40~50 Kg/cm²), this material is highly employed in key areas of cars in for structural (chassis) applications and impact protection. The new SOCO SA-78NCE tube cutting line brings you the latest technology in High Tensile Steel Tube Sawing. Its unique design and cutting system brings the highest saw blade life in such applications, as well as unparalleled performance and speed. Machine Features: Especially suitable for Cutting Automotive parts such as Impact Beams, Chassis and Cross Bar tubing High Tensile Tube Cutting (up to 120 kg/cm²) TCT Saw Blades was recommend to use High Speed Sawing: the average sawing cycle times can be up to 4.5 seconds for most sizes. Standard with 6.5 meters Bundle Loading Magazine ( MB6 ), optional 8.5 meters ( MB8 ) and 12.5 meters ( MB12 ) Automatic separation of first and last cut vs. working pieces First and crop cuts down to 25mm Quick Saw Blade Change system Safety covers for operational safety and minimizing noise levels. 1 or 2 optional length stoppers with Digital Length Readout. NC Length Stopper is available in optional. 2 Loading Positions available: Left Side and Right Side Loading Magazines Capacity up to OD76mm tubing. Sawing Lengths up to 2 / 3 / 4.5 meters Electric Servo Controlled Feeding and Cutting i2® Touch Screen Graphical Controls with Automatic Recommendation of Cutting Parameters. 3 ~ 5 minutes setup time between most tube sizes Unique Blade Holders and Gearbox Brake System for complete backlash elimination May connected to SOCOâ??s Tube Deburring Machine ( BDB-70 ) or Tube Chamfering Machine ( FM-76V ), Length Measuring ( LM-3000 ) and Stacking ( STK-3000 ) OD76mm High Tensile Steel Tube Cutting , Chamfering , Length Measuring and Stacking
NON-FERROUS CUT OFF & SLOT HHS-200NFA-DR HHS-210NAC Fully Hydraulic Cut-Off and Slot Cutting Capacity ( W x H ) (mm210 x 50 http://www.soco.com.tw/product_detail_en.php?a_id=4&b_id=6&c_id=29&d_id=66&reset_var=Y&ine_top
Upgrade your cutting room with TAC Automatic Cutting Machines and experience class-leading performance. Our machines are powered by Japanese technology and developed with Taiwanese engineering, specifically designed for thin fabrics. With our advanced cutting technology, you can enjoy improved productivity on your shop floor. Our machines are built to deliver reliable and efficient cutting performance. Don't settle for less, choose TAC for your cutting needs and experience the difference in performance.
The Japan AQUA wash & dry combo machine can wash and dry in 1 machine, 1 hour. Soft mounted, G sensor system, auto dosing systems.
Fully auto metal aglet tipping for shoelace or garment strip
90-32-2, 90-48-2, 90-17-4........etc Various spec and custom-made available
Pro-Advance represents one of the largest hardware manufacturer who has factory in Taiwan and in China. We also welcome customer's sample for pricing and sampling. Variety of clip for stationery file is also available.
Latex dipped gloves cotton Glove, 10 or 13 gauges polyester cotton, w/ Orange latex coating (double coating) on palm and fingers size: 10.5", Good for construction workers
1- Made of 100% nature rubber. 2- Soft and durable. 3- Good for industrial workers for protection against chemical splash and abrasion. 4- Also recommended for fishing, sand blasting, mining, waste and light chemical processing. 5- Smooth finish, Rolled cuff 6- Color: Black outside and Orange inside 7- Size: 14", 18" 8- CE EN388 / EN420 approval
1- Green soft pvc frame and high impact polycarbonate lens. 2- Perfect for welding chipping operation etc. 3- Lift front type. 4- Comes with 2pcs clear polycarbonate lens and 1pc green welding glasses shade no. 5, dia. 50mm 5- with black adjustable elastic band 6- CE EN175, ANSI Z87.1 approval.
General safety goggles for eyes protection in varies enviroment. Perfect fit for the head shape of western and eastern. Any question or sample requirement, please direct contact us.
