Ct-G353 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -159 dBm52 track verification channels - SBAS (WAAS or EGNOS,MSAS) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes position power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Hardware and Software - Based on the high performance features of the SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - Advanced navigation features - Smart sensor supported by IC interface - External interrupt input for context change detection - Dimension : 20 x 20 x 7 ± 0.5mm Advantages - Built-in LNA. - Built-in internal ROM and based on Firmware 5.5.X - It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. - Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) - Support SiRFaware technology - Support adaptive Micro Power Controller power management mode. - < 10mW TricklePower, so user can leave power on all day instead of power off. - Suitable for battery drive devices that need lower power consumption application Ideal for high volume mass production(Taping reel package) - Cost saving through elimination of RF and board to board digital connectors - Flexible and cost effective hardware design for different applications - Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete the positioning process with limited time just like hot start.
GPS/GNSS/GALILEO/BDS Module The Ct-G153 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) - Need operator support - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds - SiRFGeoRecovTM Reverse EE makes positioning process being done under power-saving mode. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high-performance features of SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) - < 10mW required for TricklePower mode - RoHS compliant (lead-free) - SMT pads allow fully automatic assembly processes equipment and reflow soldering - Advanced navigation features - Smart sensor supported by I2C interface - External interrupt input for context change detection - Dimension : 11.2 x 10 x 2.3 mm
GPS Mouse provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies. Thanks to the low power consumption technology, the GPS Mouse U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc. Features - 72 channel Ublox M8 positioning engine. - Ultra high sensitivity to -167 dBm. - GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support. - Supports GLONASS and is ready for Galileo. - Supports UART, USB and RS232 interface. - Up to 10 Hz update rate. - LED indicate location fix. - Ultra low power consumption.
Ct-GM551 of products utilizes SiRFstarV and feature Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Features/Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm - 52 track verification channels - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Tracks up to 8 CW jammers - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - Reacquisition Time : 0.1 second - RF Metal Shield for best performance in noisy environments Features/Hardware and Software - Based on the high performance features of SiRFstarV low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -
DS-GM451 U8 is a GPS Mouse receiver build-in well-known Ublox 8 GPS chipset. DS-GM451 U8 provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies. Thanks to the low power consumption technology, the DS-GM451 U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc. Features - 72 channel Ublox M8 positioning engine. - Ultra high sensitivity to -167 dBm. - GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support. - Supports GLONASS and is ready for Galileo. - Supports UART, USB and RS232 interface. - Up to 10 Hz update rate. - LED indicate location fix. - Ultra low power consumption.
Features: - SiRF Star V ultra low power chipset - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - Compact module size for easy integration : 15 x 14 x 2.8 mm The Ct-G551 GPS module is a high sensitivity, low power, Surface Mount Device (SMD) that fully utilized SiRFstarV upgraded features. This 48-channel Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) receiver is designed for a wide range of OEM applications and is based on the GPS signal search capabilities of the SiRFstarV CSRG05e ROM chipset, Sirf's newest chipset technology. The Ct-G551 provides flexible bus interfaces (UART). The Ct-G551 is designed to allow quick and easy integration into GPS-related applications such as: -Mobile gaming -Cellular handsets -Cameras -Asset tracking -Other location-aware consumer devices Premium on-chip software provides a new level of continuous location awareness by employing -Opportunistic ephemeris decode and advanced power management, which enable the GPS receiver to stay in a hot-start condition nearly continuously while consuming very little power -Full support for client-based and server-based SiRFInstantFixTM -Dynamic contextual awareness, temperature monitoring, and MEMS sensors that work in concert to conserve power and boost performance -Use of software control modules to achieve power saving state SiRF V GPS Module Features Performance -Highest performance Solution: -GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy -High sensitivity navigation engine (PVT) tracks as low as - GPS:-164dBm - GLONASS:-161dBm -48 track verification channels -SBAS (WAAS or EGNOS,MSAS) -Active Jammer Remover: -Removes in-band jammers up to 80 dB-Hz -Tracks up to 8 CW jammers -Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted)-Need operator support -Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. -SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. -Reacquisition Time: 0.1 second -RF Metal Shield for best performance in noisy environments Hardware and Software -Based on the high performance features of the SiRF Star V low power single chipset. -Adaptive Micropower Controller: -Only 50 to 500gA maintains hot start capability -
SiRF V GPS Module GPS Engine Board with MCX/SMA connector Ct-G340 w/Ct-G530P The Ct-G340 w/Ct-G530P module is high performance, low power GNSS receiver, based on the SiRFStarV single chipset technology while providing fast time-to -first-fix. Its far reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications. Ct-G340 w/Ct-G530P is designed to allow quick and easy integration into GPS-related applications, especially for compact size devices, such as: - Fleet Management / Asset Tracking - AVL and Location-Based Services Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - 52 track verification channels - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - RF Metal Shield for best performance in noisy environments - High sensitivity navigation engine (PVT) tracks as low as - GPS: -165dB, - GLONASS: -161dBm - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Tracks up to 8 CW jammers - Enbedded CGEE/SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high performance features of the SiRFstarVâ?¢ low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -
Green-Tak Electronic Touch Panel SUS Boiling Water Tap with under counter hot water dispenser is a great alternative of a kettle. The under counter water boiler is made of stainless steel 304 casing and stainless steel 316L hot water tank and heating element; no rusty issues and corrosion resistant. The smart EZ Tap E-touch water boiler especially designs with electronic touch panel stainless steel tap and is with multiple functions of setting of boiling hot water holding at perfect selected temperature; energy saving timer setting and an external wall mounted wireless LCD display is an option. Features: Modern Touch Panel Surface Tap Unique Touch Panel Control LCD Display Stainless steel 316L hot water tank Stainless steel 316L heating element Hot Water Tank Insulation Foam, UL approved Electricity Leakage Breaker ELB safety device Anti-scald silicone insulation pipe Child lock safety design Energy saving timer setting, environmental-friendly
The Micro 5G 4G Video Server working with your own VMS is an advance, portable and ultra-light weight (235g) video transmitter, provides reliable and high-quality video streaming from any HDMI camera. This live video broadcasting device with powerful video recorder, 5G 4G LTE modem and GPS build-in; the 5G 4G video transmitter delivers 1080P Full HD video with extreme bandwidth efficiency over LTE network/WiFi for remote monitoring from anywhere in the world. This light weight 5G 4G video streaming recording device is a compact hardware and easy to integration with 3rd party video management software. The 5G 4G live video transmitter working with Milestone or with your own VMS is very small in form (92 x 92.2 x30.7mm, without antenna) and use 5V/12V power (battery not induced). With 10,000mAh battery allows 5 hours of video streaming. Using Mobile Bandwidth Aggregator technology to improve video data streaming and reduce latency therefore the portable 4G video sender offers secure, real-time, and low-latency video broadcasting over cellular connections.
SHINING JINS ENTERPRISE specializing in manufacturing & designing cold forge Top Plate (Washer) and Pole piece (T-Yoke) for Loud-Speaker and alarms raw driver in Taiwan. We offer a complete range of Top Plate (Washer) and Pole piece (T-Yoke) uses in Home speaker, P.A. Speaker, Car speaker, Hi-Fi speaker, Sub-woofer,Car alarms and U-Yokes uses in raw Neodymium (NdFeB) speaker, tweeter etc.
We offer a complete range of Pole piece (T-Yoke) uses in Home speaker, P.A. Speaker, Car speaker, Hi-Fi speaker, Sub-woofer,Car alarms and U-Yokes uses in raw Neodymium (NdFeB) speaker, tweeter etc.
Shining Jins specializing in manufacturing & designing cold forge Pole piece (T-Yoke) for Loud-Speakers and alarms raw driver in Taiwan.
SHINING JINS ENTERPRISE specializing in manufacturing & designing cold forge Top Plate (Washer) and Pole piece (T-Yoke) for Loud-Speaker and alarms raw driver in Taiwan. We offer a complete range of Top Plate (Washer) and Pole piece (T-Yoke) uses in Home speaker, P.A. Speaker, Car speaker, Hi-Fi speaker, Sub-woofer,Car alarms and U-Yokes uses in raw Neodymium (NdFeB) speaker, tweeter etc. Production capacity: T-Yoke/Pole Piece : Diameter of Piece : 28mm up to 250mm Diameter of Pole : 10mm up to 100mm Length of Pole : 6mm up to 80mm Thickness of Piece : 2mm up to 30mm U-Yoke/Neodymium Yoke : Outside - Diameter of U-Yoke : 30mm up to 100mm ln-side - Diameter of U-Yoke : 12mm up to 90mm High of U-Yoke : 5mm up to 70mm Thickness of Piece : 2mm up to 30mm Depth of U-Yoke : According to customer design Technical Description: - Material: Low carbon steel - Entire surface shot blasting - CNC precision machining - Galvanizing - Barrel Zinc Plating - Hanging Zinc Plating - Cationic Electro-Deposition Coating (CED) Please visit our website to have a further understanding about the full range of our products. Your any inquiry would take our full attention. SHINING JINS ENTERPRISE CO., LTD. No.107, Lane 530, Sec. 1, Guoji Road, Taoyuan Dist., Taoyuan City 330, Taiwan. Tel: +886-3-361 0638 Fax: +886-3-367 7527 Web: http://www.shiningjins.com E-mail: sales1@shiningjins.com speaker,pole piece,back plate,pole,t-yoke,buttom plate,pot,u-yoke,alarn,horn,woofer,voice coil,cone paper,washer,plate,diaphragm,Frame,loudspeaker,dust cap,damper,Neodymium,NdFeB,loudspeaker,
SHINING JINS ENTERPRISE specializing in manufacturing & designing cold forge Top Plate (Washer) and Pole piece (T-Yoke) for Loud-Speaker and alarms raw driver in Taiwan. We offer a complete range of Top Plate (Washer) and Pole piece (T-Yoke) uses in Home speaker, P.A. Speaker, Car speaker, Hi-Fi speaker, Sub-woofer,Car alarms and U-Yokes uses in raw Neodymium (NdFeB) speaker, tweeter etc.
LCD panel module for TV size 17 to 24"
Shining Jins Enterprise Co., Ltd. specializing in manufacturing & designing cold forge Pole piece (T-Yoke) for Loud-Speakers and alarms raw driver in Taiwan.
The DS-354 utilized SiRFstarV â?¢ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance â?¢ GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy â?¢ High sensitivity navigation engine (PVT) tracks as low as GPS : -165dBm, GLONASS : - 161dBm â?¢ 52 track verification channels â?¢ SBAS (WAAS or EGNOS,MSAS) â?¢ Active Jammer Remover, removes in-band jammers up to 80 dB-Hz â?¢ Tracks up to 8 CW jammers â?¢ Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) â?? Need operator support â?¢ Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. â?¢ SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. â?¢ Reacquisition Time: 0.1 second â?¢ RF Metal Shield for best performance in noisy environments Hardware and Software â?¢ Based on the high performance features of SiRFstarVâ?¢ low power single core logic. â?¢ Adaptive micropower controller â?¢ Only 50 to 500�¼A maintains hot start capability (core logic) â?¢ < 10mW required for TricklePowerâ?¢ mode â?¢ RoHS compliant (lead-free) â?¢ Advanced navigation features â?¢ Smart sensor supported by I�²C interface â?¢ External interrupt input for context change detection â?¢ MMCX RF Connector â?¢ Dimension : 36 x 24 x 10.5 mm
# Integrate with smartphone # Connect with GPS # Answer and make calls # Play music # Option for an extension to intercom hand-held radio # 5.0 Bluetooth
Smart Touch Panel (HDMI Touch Solution) Inch : 11.6 ~ 17.3 Resolution : 1366x768 / 1920x1080 Brightness : 210~255 nits Touch Type : PCAP Touch IC : EETI Signal Input : HDMI / DP Allow 10 points touch We use stable ICs and bonding equipment to maintain high yield and quality. Touch function requires professional calibration to avoid the interference of the motherboard, driver board and other electrical appliances to achieve the best experience. We have professional knowledge, technology and clean room to bring customers high reliability products! PCAP type touch support multi-touch, high durability, high transparency On-board Realtek solution offers top notch reliability, precision, and robustness We provide detailed technical parameters for best performance Application : POS.Gaming.IPC.HMI.KIOSK.KVM.Laptop.Rugged PC.Automation machine...
Touch Display (PCAP / RTP Touch Panel) Inch : 7 ~ 27 Resolution : 1024x600 ~ 1920x1080 Touch Type : PCAP / RTP Touch IC : EETI Touch Interface : USB / I2C / RS232 Panel Interface : LVDS / eDP PCAP Allow 10 points touch RTP Glove touch available Along with the advancement in technology trends, display products are moving towards touch applications bringing convenience to our day to day lives making panel productions tightly linked to touch technologies. We use stable ICs and bonding equipment to maintain high yield and quality. Touch function requires professional calibration to avoid the interference of the motherboard, driver board and other electrical appliances to achieve the best experience. We have professional knowledge, technology and clean room to bring customers high reliability products! Application POS.Gaming.IPC.HMI.KIOSK.KVM.Laptop.Rugged PC.Automation machine... Our customization service : 7 ~ 27 inchTouch panel size for selection. We provide customization services for touch panel integration and optical bonding. Offer in-box packaging services for cables including Touch Panel, AD Board, OSD Key Cable, Panel Cable, and Backlight Cable.
