Micro SD card Product Description 512MB ~ 8 GB micro SD card
USB 3, 4 Outlets.
Smart band, pedometer, sleep monitor, stop watch, bluetooth, screen.
#High quality LPDDR3# - 256GB Yield rate: 88%. Well known and established technology company MOQ: 100 KPCS IN STOCKED: 1500 KPCS CIF TERM PAYMENT: T/T, SBLC, DLC
The new PD01-TB3 is equipped with 3D TLC NAND Flash via Thunderboltâ?¢ 3 interface, which means users can attain up to 1600MB/s read speed with the PD01-01's Thunderboltâ?¢ 3 transmission interface. Whether it is used for search and editing photo galleries, or for video editing and synthesis, it promises smooth and easy operation. Features 1.Thunderboltâ?¢ 3 Host Interface 2.Support 1TB Capacity 3.Thunderboltâ?¢ 3 Cable Included 4.3D TLC NAND Flash 5.Bus Powered
iR2022 accommodates 2 of 2.5SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of one hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown. Model No: iR2022 Interfaces: 7+15-pin SATA III (6.0Gb/s) Port Compatible Drives: 2.5 SATA III, II, I HDD/SSD (x2) Raid Level: RAID 0 / RAID 1 System Monitoring: Fan Failure, Overheat. HDD/SSD Failure Cooling System: 4 cm Low Noise Fan Operating System: Windows, Linux Function Control Interface: GUI (Windows Only)
GR5640-SB3 offers multiple host interfaces of Super-speed USB 3.1 Gen 1/eSATA and the equipped LCM enables the convenience of configuration for a desired RAID level among JBOD / RAID 5 / RAID 0 by fully taking the advantage from the largest supporting capacity up to 40TB above. GR5640-SB3 is not only giving a big storage capacity , but delivering data security and performance to various applications and environments.
GR3680 is a High performance, low cost, large capacity supported RAID system for high definition Video/Audio post-production workflows. It supports multiple HD Video/Audio streams and it is designed specifically for professional content creation applications and features high-speed interfaces including USB3.0 (5G) and e-SATA (6G) ports.
iR2622 is an internal (6Gbps) RAID module designed in 2 of 5.25â?� CD-Rom bay to satisfy the demands of SMB and industrial computing environment. With LCD tents leaving you to easily grasp HDD status. iR2622 accommodates 2 of 2.5â?�-3.5 â?� SATA III hard drive and offering both RAID 0 and RAID 1 functions . Uses the RAID 0 function to integrate the capacity of two hard drives and to enhance both read & write performance. On the other hand, uses RAID 1 function for data redundancy by mirroring data among both hard drives to prevent the event of a hard drive failure causes system shutdown.
Mx-1004vw is a high-performance with seamless switching output and mixed input 4x4 matrix switcher, 4 mixed input to support digital video signals and analog video signal, and 4 outputs with seamless switching function, seamless switching mode: fast switching, fade in/fade out, blinds and so on. The mixing matrix switcher adopts the advanced digital technology, with scaler function, and achieves a variety of formats to achieve a unified output signal, switching seamlessly perfect visual effects. At the same time it with infrared matrix function, analog video signal input with embedded audio function. Flexible control mode can be operated through the front panel button, remote control, and rs-232 and tcp/ip control.
The SIM7000C is Multi-Band LTE-TDD/LTE-FDD and Dual-Band GSM/GPRS/EDGE module solution in a SMT type which supports LTE CAT M1(eMTC) and NB-IoT up to 375kbps for downlink data transfer. It has strong extension capability with rich interfaces including UART, USB2.0, GPIO etc. the module provides much flexibility and ease of integration for customer's application. The biggest advantage of the product is low power consumption. General features * Single-Band TDD-LTE B39 * Three-Band FDD-LTE B3/B5/B8 * GSM/GPRS/EDGE 900/1800 MHz * Control Via AT Commands * Supply voltage range: 3.4V~ 4.2V, Typ:3.8V * Operation temperature: -40â?? to +85â?? * Dimension: 24*24*2.6 mm * Weight: 3.0g * GNSS Specifications for Data transfer * LTE CAT M1 - Uplink up to 375kbps, - Downlink up to 375kbps * NB-IoT - Uplink up to 72kbps, - Downlink up to 32kbps * EDGE Class - Max. 236.8Kbps(DL/UL) * GPRS - Max. 85.6Kbps(DL/UL) Other features * USB Driver for Microsoft Windows2000/XP/Vista/Win7/Win8/Win10 * USB Driver for Windows CE/Mobile * USB Driver for Linux /Android * RIL supporting for Android/WindowsCE/Mobile * Firmware update via USB * TCP/IP/IPV4/V6 Multi-PDP,MT PDP * DTMF* * Gobi SDK to the Win7/Win8/Linux * MBIM to Win8 * Source code of the PC manager of the device for reference Interfaces * USB2.0 * UART * SIM card * GPIO * ADC * PCM*
EDAM-8520U4 Isolated RS-232 to 4-CH RS-485 converter (Iso RS-232) * True RS-485 Star Wiring Hub * Surge protection on RS-485 line * The RS-485 Short-circuit protection * Isloated on RS-232 side * Auto direction flow control on RS-485 * Independent RS-485 driver for each channel * Transmission speeds of up to 115kbps or 6 Kbps (E-8520U4F) * Power and data flow indicator for trouble shooting
EDAM-8521 Isolated Addressable RS-485/422 to RS-232 Converter * Addressable RS-485/422 to RS-232 Converter * Support Addressable or Nonaddressable mode * RS-232 support RTS, CTS handshake signal * Transmission speeds of up to 115.2 kbps * RS-232/RS-485 can be set to different baud rates * Support ASCII format and Modbus-RTU protocol * Surge protection on RS-485/422 line * Minimum 3000 VDC isolation protection * Power and data flow indicator for trouble shooting
TP8013 8inch Rugged Tablet with optional Fingerprint and NFC Size: 8inch OS : Android 7 Memory :2G Ram+16G Rom 4G bands support Wi-Fi and Bluetooth 4.0 support SIM support GPS support Front 2mp camera +5mp rear camera Battery: 8000mah Fingerprint : 500DPI, 320x480 pixels(optional ) NFC : optional 13.56 mhz Micro USB support Touch LCD 1280x800IPS, toughen Glass If without Fingerprint is IP67 If with Fingerprint is IP65 Dropproof +Waterproof+Dustproof
video measuring machine Standard vmm-d series Carmar manufacture video measuring system, including linear scale, digital readout(optional), working stage, as well as software, therefore the consistency is much better than other brands Vmm is a measuring system with ccd camera for 2d measurement. Vmm are one of the best developed products in carmar�??s product lines. Providing customers with precise, cost effective equipments and good service are our business philosophy. Vmm series satisfy all kinds of two dimensional measurements with self-developed software. Features: 1. High accuracy with fixed working table and granite pedestal; 2. Rs-232 interface can do comm unication between measuring software and computer. 3. Optional: high resolution japan 1/2" color ccd camera with sharp images; 4. The user can manage and output the graphs as bmp or dwg format by connecting with pc and running the program. 5. One-click edge detection.
Vertical standard type digital optical comparator Pv-3015 series (reverse image) Pv-3015e series (erect image) Pv series profile projectors are reliable and affordable measuring system of high precision and efficiency. An excellent solution to the most critical requirments of high quality optical profile measuring suitable for measuring different shapes. Complicated profiles such as press components, gears, cams, treads, tools, dies, turned components, automats ect. Most effective device to measure most 2 dimensional parameters like linear dimensions and angles. The components, such as linear scale, digital readout, optical lens, etc., are all made by carmar technology. Features: Excellent optical measuring system to project precisely magnified image. Magnification accuracy : 0.08% contour, 0.12% surface. Equipped with dc-3000 data processing system and foot-switch for measuring. Erect image measuring for different requirements.
1. Full shielded with zinc alloy housing 2. Rj45 full shielded type 3. 180 straight cable entry 4. Comply with cat.8 and cat.6a 5. Suitable for the poe plus ( ieee 802.3at ) applications 6. Easy, quickly, reliable and comfortable installation 7. Suitable for cabling from home networks to large data centers
Standard linear scale LE series Features: 1. The linear scales are designed with five bearings on the slide for superior repeatability, high slide accuracy and long service life. 2. The scale frame is manufactured from anode treated aluminum alloy. 3. The hard chrome scanning head is treated for corrosion resistance. 4. The signal wires employ a multiple layer braided net and are guarded with stainless steel shades for waterproof and anti-interference performance.
FEATURES 1. Compliant with IEEE802.3af and supporting Non-standard POE 2. Power output: 5V/2A 3. Data rate: 10/100Mbps 4. Supporting either mode A or mode B 5. Power/Data cables (21cm) 6. LED indication for DC power OVERVIEW PD2052U is a IEEE802.3af POE Splitter with a network cable and Micro USB cable. It supplies operational power to Raspberry Pi B/B+/2/3 or any other 5V micro USB powered devises. PD2052U enables power current to travel on the Ethernet network cables and eliminates the need to directly connect a power supply to the powered devices.
Specification : · SOFT PVC USB flash drive · Custom logos can be 2D flat or 3D cutic · We have some open designs for options · Free mold charge for choosing open designs. · Available USB Capacity: 64MB, 128MB, 512MB, 1GB, 2GB, 4GB, 8GB ....etc.
