Place of origin: taiwan Laminate: fr4, rogers, isola, etc. old, immersion tin & silver, & osp Maximum layer count, prototype: 40 or more layers Max. Board size: 18 x 24 inches Bow and twist: max 0.1% Drilled via size: 2 mils Annular ring: 1.5 mils Inner line width:
EDAM9000 Ethernet module Including: Analog I/O module Digital I/O module.
EDAM5000 USB, TCP/IP, RS232/485 module Including: Analog I/O module Digital I/O module.
EDAM8000 RS-485 modules (Converter and Repeater) Including: Analog I/O module Digital I/O module PC-based intelligent controller.
Min.trace W/S: 3/3mil Max.layer count: SS, DS to 32L Max. working PNL size:21"x24" Material: FR4, Hi-tg, CEM-1, CEM-2 and more Impedance Control & Surface finish. We ship by UPS and Fedex, sample orders.
Used main board For PC : Socket 370 , Socket 462 , Socket 478 For Laptop : IBM, DELL, HP, Compaq
Embedded tiny high power poe pse module Befact technologies launches embedded quad port pse module, pse-hqd(high power) in september, 2008. Pse-hqd is standard and ieee802.3af compliant embedded power sourcing equipment module. Also, pse-hqd supports high power mode. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-hqd, 650ma/per port) but also have total power limit protection (pse-hqd maximum total power protection, 160w). Besides, pse-qd and pse-hqd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe+ total solution to make you feel convenient when you design. Below are the key features of pse-hqd Ieee802.3af compliant. Per port maximum output pse-hqd, 650ma. Pse-hqd supports high power mode and backward compatible to normal power mode. Maximum total power protection. Support pd power classification from class 0 to class 4. Per port over/under voltage protection. Per port short circuit protection. Per port over current protection. Thermal cut off. Equip common mode choke (per port) to reduce emi. Enhance current surge protection. Per port pse status indication. 1.Tiny size 92mm(l)x 25.1mm(w)x24mm(h)
Embedded normal power poe pd module Befact technologies launches embedded quad port pse module, pse-qd in september, 2008. Pse-qd is standard and ieee802.3af compliant embedded power sourcing equipment module. Befact puts high emphasis on safety issue, so we provide double protection mechanism to protect your design. Pse modules not only equip per port over current protection (pse-qd, 450ma/per port) but also have total power limit protection (pse-qd maximum total power protection, 109w). Besides, pse-qd still provide under/over voltage protection, so befact would like to recommend you this more safer and higher quality poe total solution to make you feel convenient when you design. Below are the key features of pse-qd 1.Ieee802.3af compliant. 2.Per port maximum output pse-qd, 450ma 3.Maximum total power protection. 4.Support pd power classification from class 0 to class 4. 5.Per port over/under voltage protection. 6.Per port short circuit protection. 7.Per port over current protection. 8.Thermal cut off. 9.Equip common mode choke (per port) to reduce emi. 10.Enhance current surge protection. 11.Per port pse status indication. Pse-qd can support double power mode operation (pse-qd, 40w/per rj45 port) for high power consumption remote device, and so do thpd& tpd module. For example, when pse-qd & tpd-12 are applied in the same poe link simultaneously and they are operated in dual power mode, tpd-12 can offer up to 24w to remote device. So befact poe solution is also suitable for high power consumption product to utilize. If you are interested in befact technologies poe total solution, welcome to visit befcat technologies website detail information. 1.Tiny size 92mm(l)x22.1mm(w)x24mm(h)
12w output embedded poe pd module(tpd-50) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. The main features of tpd-50 are as following A.Isolated pd module, isolation level 1.5kv B.Ieee802.3af compliant. C.Support wide input voltage range, 39vdc to 55vdc. D.High dc/dc converting efficiency, 86%. The output power is 12w(tpd-50) E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h). F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-50 modules. 1.Tiny size 60mm(l) x 19.7mm(w)x16mm(h).
16W Output Embedded PoE PD module(THPD-33) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. Below are the main features of thpd-33 modules A.Isolated pd module, isolation level 1.5kv B.Backward compatible ieee802.3af C.Support wide input voltage range, 36vdc to 55vdc. D.High dc/dc converting efficiency, 74%. The output power can reach 16w(thpd-33) E.Tiny size 75mm(l) x 22mm(w)x15.5mm(h) F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of thpd module depends on its loading. Also, the tiny size of thpd module increases pcb utilizing space. High dc/dc converting efficiency lowers the heat accumulation and temperature of thpd-33 modules. 1.Tiny size 75mm(l) x 22mm(w)x15.5mm(h)
12W Output Embedded PoE PD Module(TPD-12) Befact technologies announces two series of embedded tiny poe pd module - high power (thpd) & normal power (tpd). According to the output voltage, tpd&thpd series modules support three output voltage-3.3v, 5v and 12v. Embedded tiny poe pd module extracts power from pse via conventional category 5 ethernet cable. The application of tiny poe pd module is wireless access point, access point, ip camera, media converter, ptz camera, wimax, voip phone, surveillance/security system. The main features of tpd-12 are as following A.Isolated pd module, isolation level 1.5kv B.Ieee802.3af compliant. C.Support wide input voltage range, 39vdc to 55vdc. D.High dc/dc converting efficiency, 89%. The output power is 12w(tpd-12) E.Tiny size 60mm(l) x 19.7mm(w)x16mm(h)) F.Thermal cut off & short circuit protection. G.The operating temperature is from -15oc to 55oc, @full load. The output power of tpd module depends on its loading, too. High dc/dc converting efficiency lowers the heat accumulation and temperature of tpd-12 modules. 1.Tiny size 60mm(l) x 19.7mm(w)x16mm(h))
Single, double, multilayer, LED Heat Sink Module, Metal-based Board, Cu-based Board, Al-based Board, Rigid-flex Board, Telfon, Rogers, Polyimide, Heavy Copper Board (4~10oz), Thick Board (3.0m/m~6.0m/m)
multi game and single game pcb book of ra best price . high quality.
Model No.: LTCC3535,LTCC5050,3535,3028, Made in Taiwan, ROC Key Features Ceramic metallized: Ti/W,gold(Au), sliver(Ag),Copper(Cu),nickel(Ni)¡Kothers & produce final circuit coating:0.075um to 5mil Ceramic Metallized substrate: Al2O3 substrate metallized AlN substrate metallized Silicon wafer metallized LED heat-dissipation ceramic substrate: LED Al2O3 thin film substrate LED Al2O3 thick film substrate LED AlN thin film heat-dissipation substrate Flip chip substrate: The integration of the thin film,thick film,electrode plating and electroless plating processes: Application: 1. High Power LED ceramic substrate 2. Microwave (Wireless Communication & Radar) 3. Semiconductor Process Equipment 4. Solar Cell 5. Hybrid Electric Vehicles 6.Flip chip/eutectic substrate 7.Sensor ceramic substrate
Double-layer/Multi-layer PCBs, ceramic/aluminum substrate PCBs, as well as flexible FPCBs. We offer PCBs from single side PCB up to 12 Layers
1. Number of Layers: 1 layer 2. Base Material: FR4, High Tg FR4, Halogen Free, Rogers, Aluminium, Cem-1, Cem-3, Ceramic, etc. 3. Copper Thickness: 1/3 oz ~ 6 oz 4. Board Thickness: 0.2 mm ~ 7.0 mm 5. Min. Line Width/space: 3mil/3mil 6. Min. Hole Size: 0.1 mm 7. Surface Finishing: HASL, LF HASL, OSP, Immersion Gold, Immersion Silver, etc. 8. Impedance control: ±10% 9. Solder Mask: Green, Black, White, Red, Blue, Yellow, Mass Black, etc . 10. Silkscreen: White, Black, Green 11. Hole tolerance: PTH±0.075 mm, NPTH±0.05 mm 12. PCB Standard: IPC-A-610 E Class II-III 13. Profiling Punching: Routing, V-CUT, Beveling 14. Wrap and Twist: 1% 15. Place of Origin: Taiwan AD Plus Corporation provides service in the comprehensive range of professional PCB manufacturing. We passed ISO 9001:2015 & ISO 14001:2015 certified, UL approved, ROHS etc. According to product of versatility, AD Plus Corporation is with professional CAM engineers and process expertise, enabling prompt and accurate PCB manufacturing which meets with customer needs, together with strict quality control that contributes to more time- and costs-saving for the customer.
1. Number of layers: 1-12 layers 2. Base material: FR4, High TG FR4, Halogen free, Rogers, Aluminium, Cem-1, Cem-3, Ceramic, etc. 3. Copper thickness: 1/3oz ~ 6oz 4. Board thickness: 0.2 mm ~ 7.0 mm 5. Min. Line width/space: 3mil/3mil 6. Min. Hole size: 0.1 mm 7. Surface finishing: HASL, LF HASL, OSP, Immersion gold, Immersion silver, etc. 8. Impedance control: ± 10% 9. Solder mask: green, black, white, red, blue, yellow, mass black, etc . 10. Silkscreen: white, black, green 11. Hole tolerance: PTH ± 0.075 mm, NPTH ± 0.05 mm 12. PCB standard: IPC-A-610 E Class II-III 13. Profiling punching: Routing, V-cut, Beveling 14. Wrap and twist: 1% 15. Place of origin: Taiwan Ad plus corporation provides service in the comprehensive range of professional PCB manufacturing. We also passed ISO 9001:2015 certified, ISO 14001:2015, UL approved, ROHS etc. According to product of versatility, ad plus corporation is with professional cam engineers and process expertise, enabling prompt and accurate PCB manufacturing which meets with customer needs, together with strict quality control that contributes to more time- and costs-saving for the customer.
1. Number of layers: 2 layers 2. Base material: FR4, high TG FR4, Halogen free, Rogers, Aluminium, Cem-1, Cem-3, Ceramic, etc 3. Copper thickness: 1/3 oz ~ 6 oz 4. Board thickness: 0.2 mm ~ 7.0 mm 5. Min. Line width/space: 3mil/3mil 6. Min. Hole size: 0.1 mm 7. Surface finishing: HASL, LF HASL, OSP, Immersion gold, Immersion silver, etc. 8. Impedance control: ± 10% 9. Solder mask: green, black, white, red, blue, yellow, mass black, etc. 10. Silkscreen: white, black, green 11. Hole tolerance: PTH ± 0.075 mm, NPTH ± 0.05 mm 12. PCB standard: IPC-A-610 E Class II-III 13. Profiling punching: Routing, V-cut, Beveling 14. Wrap and twist: 1% 15. Place of origin: Taiwan Ad plus corporation provides service in the comprehensive range of professional pcb manufacturing. We also passed iso 9001:2015 certified, iso 14001:2015, ul approved, rohs etc. According to product of versatility, ad plus corporation is with professional cam engineers and process expertise, enabling prompt and accurate pcb manufacturing which meets with customer needs, together with strict quality control that contributes to more time- and costs-saving for the customer.
Printed Circuit Board Assembly.
PCB, PCBA, IC, CHIP.
