emassage is the intelligent massager Your personal smart massage expert Portable massager to operate via app (Android Play). >>> No battery required and no main device machine
The sd series optical level switch uses the principle of light reflection in a prism to sense the absence or presence of a liquid at the point where the sensor is installed in a tank, pipeline or other type of container. Feature: 1.Simple and compact with no moving parts 2.Led indication 3.10-28vdc, 115vac or 230vac powered versions 4.Solidstate npn/pnp or relay output 5.Operating temperatures up to 257°f (125°c) 6.Wide range of use in machine systems for a variety of liquid level detection 7.Unique sd22 design, switch body and tip disconnects
SP Series is a thermal dispersion flow switch is a precise flow sensing device for liquids. The principle of operation is based on heat transfer. The SP thermal dispersion flow switch is offered with a variety of output types and materials of construction. No moving parts make the SP series a long lasting and high value flow switch. Feature: 1.No moving parts, solidstate performance and reliability 2. per second (150cm/s) measuring range for water; 1~118300cm/s) range in oil 3.304SS, 316SS, PVDF and polypropylene wetted parts 4.Maximum operating pressure up to 1,450psi (100bar) 5.Choice of NPN/PNP, N.O. or N.C. relay, or SPDT relay output 6.Standard and custom extended insertion lengths 7.Standard or high temperature, explosionproof units available 8.LED indication of flow status 9.Marine certified unit available
The ec series is a hydrostatic pressure level transmitter for measuring the level of liquids in various tanks and other types of vessels. The ec hydrostatic pressure level transmitter consists of a piezoresistive sensor and wheatstone bridge to directly measure head pressure exerted on the diaphragm of the ec level transmitter. When the pressure is exerted on the diaphragm, as a result of the liquid level, the pressure is transferred to the wheatstone bridge electrical circuit through silicon oil contained in the ec sensing unit. This creates a differential voltage, which is then amplified to create a variable 4-20ma output that varies as a result of the changing liquid level. In addition, a pressure transducer is available for measuring pressure in tanks or pipes and producing a variable 4-20ma output. Application: Use 1.Extension cable unit can measure in deep wells or reservoirs 2.Tank level measurement and control 3.Plc or dcs input for level control functions 4.Pressure measurement of gas or liquid (ec1500) Industry 1.Water treatment and distribution 2.Chemical 3.Many others
Specification: 1.Supply voltage: loop power 18~32 vdc 2.Dcv input: 0~500 mv/ 0~1v/ 0~5v/ 0~10v/ 0~20v 3.Dca input: 0~20 ma/ 4~20 ma 4.Thermocouple input: k / j / t / e / r / s / b / n 5.Rtd/ resistance input: pt100/0~400w 6.Analog output: 4~20 ma (loop power) 7.Ambient temperature: -20~60c 8.Communication: hart 9.Galvanic isolation: 1500v Feature: 1.Isolation voltage: 1500 vac 2.Loop power 12~32vdc 3.Linear current output 4.Lcd display with 3 press buttons 5.Universal type with multi-signal input 6.With communication port for programming 7.Optional: hart Transmitter
All FORT metal alloy shunt resistors are anti-surge, anti-sulfur, low T.C.R., compliant to RoHS and Halogen free. FORT Technology Co., Ltd. is a specialist Metal Alloy Current Sensing Resistors manufacturer in Taiwan with ISO9001, ISO14001, OHSAS18001 and ISO/TS16949 certificated. We are specialized in manufacturing and supplying SMD Metal Alloy milli-Ohm Shunt Resistors (0~1Ω) with high power and SMD Metal Alloy Current Jumper Resistors (0 ohm).
Steering wheel switch control for: Honda Nissan Toyota -
10'' PP Water Purifiers 1.The prodact are have liability insurance 2.PP Filter 3.Micron Rating (Nominal): 5 Micron 4.Filter Media: Polypropylene 5.Replaced every 3-6 months depends on water quality. 6.Change when color darkens or water flow slows 10'' PP Water Purifiers Model No.:10''-1 10'' PP Water Purifiers Type:1stage 1stage:Pre-filter 5 Micron PP filter
20'' PP Water Purifiers 1.20 inch PP Water Purifiers 2.The prodact are have liability insurance. 3.Micron Rating (Nominal): 5 Micron 4.Filter Media: Polypropylene 5.Replaced every 3-6 months depends on water quality. 6.Change when color darkens or water flow slows 20'' PP Water Purifiers Model No.:20''-1 20'' PP Water Purifiers Type:1stage 1stage:Pre-filter 5 Micron PP filter
20'' RO Water filter cartridge 1.20 inch RO water filter cartridge 2.AP Quick Changed Filter Cartridge 3.The prodact are have liability insurance 4.Remove particles 5.10â?� Quick Change Filter Cartridge 6.Micron Rating (Nominal): 5 Micron 7.Filter Media: Polypropylene 8.Replaced every 3-6 months depends on water quality 9.Change when color darkens or water flow slows 20'' RO Water filter cartridge Model No.:AP-1 20'' RO Water filter cartridge Type:Pre-filter 5 Micron PP filter Maximum Flow:1.5GPM Maximum Pressure:125PSI Maximum Temperature:65degree C Replaced period:Every 3-6months,depends on water qulailty
Big Blue Water Purifiers 1.PP Filter 2.The prodact are have liability insurance 3.Micron Rating (Nominal): 5 Micron 4.Filter Media: Polypropylen 5.Replaced every 3-6 months depends on water quality 6.Change when color darkens or water flow slows Big Blue Water Purifiers Model No.:Big Blue-1 Big Blue Water Purifiers Type:1stage 1stage:Pre-filter 5 Micron PP filter
1 Stage Water Purifier 1.Effective in removing dirt, rust and sand particles 2.Takes out the chlorine and organic chemicals 3.Enhanced reduction of taste, odor, and color 4.Improving water quality to enjoy better tasting water 1 Stage Water Purifier. Model No.:FHE-1100 1 Stage Water Purifier Type:1 stage 1st Stage:Pre-filter 5 Micron PP filter Flow Rate:Max. 3L/minute Filter Lifetime:6000L Dimension:12x10x36cm
3 Stage 10'' Water Purifier 1.3 stage RO water filter cartridge 2.10â??â?? water filter Cartridge 3.The prodact are have liability insurance 4.Remove particles 5.Micron Rating (Nominal): 5 Micron 6.Filter Media: Polypropylene 7.Replaced every 3-6 months depends on water quality 8.Change when color darkens or water flow slows 9.Filter Media: Activated Carbon 10.Replaced every 6-9 months depends on water quality 11.Filter Media: Polypropylene 12.Replaced every 9~12months depends on water quality 3 Stage 10'' Water Purifier Model No.:10''-3 3 Stage 10'' Water Purifier Type:3stage 1stage:Pre-filter 5 Micron PP filter 2stage:CTO Carbon Block Filter 3stage:Pre-filter 1 Micron PP filter
3 stage Water Purifier with Faucet 1.Effective in removing dirt, rust and sand particles 2.Takes out the chlorine and organic chemicals 3.Enhanced reduction of taste, odor, and color 4.Improving water quality to enjoy better tasting water 3 stage Water Purifier with Faucet Model No.:DB-1055 3 stage Water Purifier with Faucet Type:3 stages 1st Stage:Pre-filter 5 Micron PP filter 2st Stage:UDF carbon filter 3st Stage:Sediment 1 Micron PP filter Flow Rate:Max. 3L/minute Filter Lifetime:7500L Dimension:23x10x36cm
1.High-Concentration Hydrogen Water Generator (Made in Japan by Victory Japan) 2.Simple Hydrogen mode 3.Convenient Ozone mode 4.Portable design 5.All-in-one No need to install Model No.:HS-72 Cup Capacity:1800ml Hydrogen Content:~1.2ppm Redox Potential:~-480mV Power:110V~240V Power Consumption:~24W Size:width 316 x deep 160 x high 270 (mm) Weight:1800g
Item No:CFE014 Material: Stainless Wireã?�SEBS Size:9.7cm(W)*13.2cm(D)*17cm(H) Max Load:5KG Made in Taiwan Products Descriptions 1.High quality with reasonable price 2.#304 Stainless Steel, Itâ??s quiet strong and durable 3.Easy to take in the hair dryer 4.No nails, easy to install, washable and reusable 5.Advanced Production machine
CSA & UL listed Festoon Cable (CSA C22.2 NO 96-09) Size :4/0~16 AWG Core :3C~24C Conductor : Soft Bare Copper Insulation : PVC Jacket : PVC Rated Temperature : -40~105C Rated Voltage :600V Standard : UL, CSA Application : Cranes, hoists or any equipment which travels with lateral traversing motion. We are the sole UL & CSA listed Festoon cable Manufacturer in Asia. Feel free to contact me anytime for any inquiry, thank you!
Trade Term & Delivery?: (1)Quotes are based on F.O.B Taiwan port US$. (2)Payment term: T/T in advance. (3)Delivery: within 2~3 weeks after receipt of T/T(wire transfer). --- O.E.M./O.D.M orders are welcome ---
**ic socket** Trade term & delivery?: (1)quotes are based on f.O.B taiwan port us$. (2)payment term: t/t in advance. (3)delivery: within 2~3 weeks after receipt of t/t(wire transfer). --- o.E.M./o.D.M orders are welcome --- All the wish products are 100% made in taiwan. **registered trademarks ** Please purchase genuine product. Counterfeiting not allowed.
Features: (1) Delicate printed coordinates for easy recognition and calculation. (2) Board body made by advanced POM material to avoid static electricity and frequency interference. (3) It accommodates all sizes of DIP IC and discrete components with diameters 0.65±0.1m/m, interconnect wires 20-28AWG(ø0.3-ø0.8mm). (4) Spring contact uses phosphor bronze/nickel-plated with highly elasticity and good conductive, can stand operation more than 10, 000 times. (5) Max. allowable voltage/current:48Volts/5Amps. (6) WBU-2xx Series is a valuable tool.No signal interference caused screen white dot. Suitable to design high level prototypes whether in R&D application or university laboratories.
