Light source : 650nm Laser Diode Depth of field (40mils) : 400mm Scan Speed : 100 scans/sec Best resolution : 0.1mm (4mils) - Code 39 Print contrast : 45% or more Scan Angle : 38° Indicators : green/red LED & beeper Interface : USB, KB , RS232 Symbologies : Code 128, Code 39, UPC-A, UPC-E, Codabar, Interleaved 25, Industrial 25, matrix 25, Code 93, EAN-13,EAN-8, MSI, PLESSEY, Code11, Code32. Dimension (L * W * H):90 x 60 X 160 mm Weight :110 g +/- 5 g (No cable).
Light source : 622nm ~ 628 nm LED Depth of field :20mm~500mm Sensor : CMOS (725×480 pixels) Best resolution : 3 mil Print contrast : 25% Reading angle : Roll 360° , Pitch 45° , Yaw 45° Indicators : blue LED & beeper Interface : USB COM Port Emulation , RS232 Symbologies : EAN13, EAN 18, Code 128, Code 39, UPC-A, UPC-E, Codabar, Interleaved 2 of 5, IS, Code 93, PDF417, China post 25, ISBN/ISSN , DataMatrix, QR Code, MaxiCode, Aztec, Postal, Chinese-Sensible Code, LP Code. Dimension (L * W * H):97 x 70 X 175 mm Weight:150 g +/- 5 g (No cable).
Specification: 1.Supply voltage: loop power 18~32 vdc 2.Dcv input: 0~500 mv/ 0~1v/ 0~5v/ 0~10v/ 0~20v 3.Dca input: 0~20 ma/ 4~20 ma 4.Thermocouple input: k / j / t / e / r / s / b / n 5.Rtd/ resistance input: pt100/0~400w 6.Analog output: 4~20 ma (loop power) 7.Ambient temperature: -20~60c 8.Communication: hart 9.Galvanic isolation: 1500v Feature: 1.Isolation voltage: 1500 vac 2.Loop power 12~32vdc 3.Linear current output 4.Lcd display with 3 press buttons 5.Universal type with multi-signal input 6.With communication port for programming 7.Optional: hart Transmitter
iDC9600K features: * Adopts RIOTEC AI3220 2D engine * Simply operation through LCD display * iOS / Android / Windows supported * Keyboard Toggle on iOS device * Long transmission distance: 70~100 meters, Line of Sight * Long working time: support 10,000 scans/per fully charged. * Supports "Direct-scan" and "Memory-scan" modes * Multi-language UI: English, German, Spanish, French, Japanese
OM7520M, the best accessory for POS, is designed for Retail use. * Easy installation: Plug & Play * CMOS Sensor: 1280 x 1024 pixels * Motion Tolerance: 3.0 m/sec * Can read 1D/2D barcodes on paper label as well on display * Hand-free model: keep lines moving * can be applied in Supermarket, Convenient Store Looking forward to hearing from you soon. Have a nice day!
8 Isolated Analog/Thermocouple Temperature Input Module * Support Thermocouple J.K.T.R.S.E.B.N.C Type * Protocol MODBUS RTU, ASCII Command * Support Isolated input channels * Fully photo-isolation 3750Vrms * Wide supply voltages (10-30V) * Built-in TVS / ESD protection * Burn-out auto detection
Intel atom d525 dual core @ 1.80ghz 1gb ram 160g hdd / 8" lcd 800*600 / built-in printer/ programmable keyboard / 2x20 customer display 1pc per carton. Dimension: 365 x 390 x 170 mm; n.W. 5.8 kgs.
The sd series optical level switch uses the principle of light reflection in a prism to sense the absence or presence of a liquid at the point where the sensor is installed in a tank, pipeline or other type of container. Feature: 1.Simple and compact with no moving parts 2.Led indication 3.10-28vdc, 115vac or 230vac powered versions 4.Solidstate npn/pnp or relay output 5.Operating temperatures up to 257°f (125°c) 6.Wide range of use in machine systems for a variety of liquid level detection 7.Unique sd22 design, switch body and tip disconnects
SP Series is a thermal dispersion flow switch is a precise flow sensing device for liquids. The principle of operation is based on heat transfer. The SP thermal dispersion flow switch is offered with a variety of output types and materials of construction. No moving parts make the SP series a long lasting and high value flow switch. Feature: 1.No moving parts, solidstate performance and reliability 2. per second (150cm/s) measuring range for water; 1~118300cm/s) range in oil 3.304SS, 316SS, PVDF and polypropylene wetted parts 4.Maximum operating pressure up to 1,450psi (100bar) 5.Choice of NPN/PNP, N.O. or N.C. relay, or SPDT relay output 6.Standard and custom extended insertion lengths 7.Standard or high temperature, explosionproof units available 8.LED indication of flow status 9.Marine certified unit available
The ec series is a hydrostatic pressure level transmitter for measuring the level of liquids in various tanks and other types of vessels. The ec hydrostatic pressure level transmitter consists of a piezoresistive sensor and wheatstone bridge to directly measure head pressure exerted on the diaphragm of the ec level transmitter. When the pressure is exerted on the diaphragm, as a result of the liquid level, the pressure is transferred to the wheatstone bridge electrical circuit through silicon oil contained in the ec sensing unit. This creates a differential voltage, which is then amplified to create a variable 4-20ma output that varies as a result of the changing liquid level. In addition, a pressure transducer is available for measuring pressure in tanks or pipes and producing a variable 4-20ma output. Application: Use 1.Extension cable unit can measure in deep wells or reservoirs 2.Tank level measurement and control 3.Plc or dcs input for level control functions 4.Pressure measurement of gas or liquid (ec1500) Industry 1.Water treatment and distribution 2.Chemical 3.Many others
Solar/poe charge controller + gigabit poe injector Model : bc-4024-g56d 1. Input : 1.1 input voltage: poe : 36vdc ~ 57vdc Solar : 30v ~ 45v Battery : 24v 2. Output : 2.1 output voltage & current: Output : 56v poe(front) / 24v load(rear) Max. Current : 0.63a poe(front) / 10a load(rear) 3. Charger : 3.1 poe charge current : 0.85a (max) For load first, only the balance used to charging. Only work with battery connected. 3.2 poe input watts : 30w(min) 3.3 poe input compliant to 802.3at, all 4 pairs available, giga. 3.4 solar charge current : 40a(max) 28.4, 0.3v vin.
Barcode scanners.
1D, 2D wired/wireless handheld laser barcode scanners, RFID and engines.
Barcode scanner.Shipping
Level measuring instruments, level switch, level sensor, level transmitter, level indicator.
Android POS, PC POS, true flat POS, Ecrpos, panel PC, mobile terminal, Kiosk, Kiosk accessory POS peripheral: POS monitor, POS printer, label printer, customer display, cash drawer, programmable keyboard, barcode scanner, price checker.
P/n: ut89055 - full sweep mechanical oil temperature gauge - silver dial face with black text - silver aluminum bezel - red pointer - 2-1/16" dia. - 100-340 deg f - 12v - precision & durability movement - bulb lighting - with 6 ft. Capillary tubing & 1/2" npt fitting - mounting bracket, washers & nuts attached - packaging in white box - 1 year warranty Pc/white box, 50 pcs/ctn
EDAM-8018A 8 Isolated Analog/Thermocouple Temperature Input Module * Support Thermocouple J.K.T.R.S.E.B.N.C Type * Protocol MODBUS RTU, ASCII Command * Support Isolated input channels * Fully photo-isolation 3750Vrms * Wide supply voltages (10-30V) * Built-in TVS / ESD protection * Burn-out auto detection
ST2760 is a internal JBOD module, which supports two 2.5� SATA hard drive, you can store the operating system and data file in different hard drive or use it with a RAID card. It is designed to has the same dimension as one 3.5� hard drive or one floppy size, this allows you to install ST2760 in the mini-Server, Surveillance Server, 1U Server, eMail Server and POS System that has limited space. ST2760 can help you to save the problem of requiring larger capacity but with limited space. Model No ST2760-2S-S2 Drive Bay 3.5" Floppy DriveBay Drive Fit 2.5" SATA III HDD x 2 (9.5mm thickness) RAID Level JBOD Host Interface SATA III Connector (7Pin) x2 Power Supply SATA Connector (15Pin) HDD Access Indicator LED Color Matt Black Structure Metal Body Dimensions 101.7W x 147L x 25.8H(mm) Weight 0.4(kg) Certifications CE & FCC Operating System Support Windows, Linux Packing Content Accessory Kit HDD Capacity Single HDD tested up to 2TB Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
iT4300-U6 is a 4 bays internal storage solution for 5.25-inch CD-ROM. Using the JBOD function enables you to store the operating system and data file in different hard disk space. The advantage of storage distribution can help to enhance the performance of system operation. RAIDON also delivers iT4300-U6 with only JBOD function to SAS interface, users may collocate a RAID card whenever is necessary to upgrade to a RAID storage for desired applications. Model no. iT4300-U6 Interface SFF-8643 miniSAS 12Gbps Port Support Hard Drive 4x 2.5� SAS/SATA HDD/SSD RAID Level JBOD Cooling Fan 4 cm Power Supply 15-pin Power Connector LED Indicators Yes Operating System Windows, Linux Certification CE & FCC Packing Content Quick Installation Guide� Accessory Kit�Key� MiniSAS 12Gbps Internal Cable Dimension 146(W)x 42(H) x 153(L) mm Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
