The primary use of iron ore is in the production of iron. Most of the iron produced is then used to make steel.
Available in 12ft to 100ft 24ft: Plug in Battery timer: 6 hours on, 18 hours off Steady, flash, fade functions (battery only) Colors: Warm White / Cool White / Red / Blue / Green / Multi-color / Color Changing Solar potential
SPECIFICATIONS Steel Scrap in bulk according to grade HMS 1&2 Max size 1500*500*500 mm. 40% of HMS 2, sheets of max 4mm thick, max 5% of galvanized steel (close to ISRI 203), max 2% of soil is acceptable. Cast iron, baled scrap, non-ferrous metals, explosive shells of military type, any gas tubes (empty or full), radioactive materials, slag, melt, stones is not allowed. Oversize is not allowed.
Metal scrap like copper scrap, iron scrap, aluminum scrap, hms 1&2 scrap, aluminum ingots, lead ingots, stainless steel scrap.
MS Head: Pan, Round, Truss 1.4mm~6mm 2#~10# 1/8"~1/4" (custom made screw). 12"x8"x8".
Aluminum scrap, taipei kaoliang korea cosmetics.
Metal scrap.
Baled tyre scrap.
Magnesium scrap including first-class scrap, baking paint, magnesium slag, magnesium chips.Trade and FOB and CIF, transportation
Recycled HDPE, LDPE, PP, PVC, PC, ABS RESIN new HDPE, LDPE, LLDPE, PP, PE, ABS, EVA, PET.
Retreaded tyres, casings, rubber treads.
Scrap metals, hms, e waste, plastic resins .
SiRF V GPS Module GPS Engine Board with MCX/SMA connector Ct-G340 w/Ct-G530P The Ct-G340 w/Ct-G530P module is high performance, low power GNSS receiver, based on the SiRFStarV single chipset technology while providing fast time-to -first-fix. Its far reaching capability meets the sensitivity requirements of car navigation as well as other location-based applications. Ct-G340 w/Ct-G530P is designed to allow quick and easy integration into GPS-related applications, especially for compact size devices, such as: - Fleet Management / Asset Tracking - AVL and Location-Based Services Performance - GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy - 52 track verification channels - Active Jammer Remover, removes in-band jammers up to 80 dB-Hz - Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. - SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. - RF Metal Shield for best performance in noisy environments - High sensitivity navigation engine (PVT) tracks as low as - GPS: -165dB, - GLONASS: -161dBm - SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN) - Tracks up to 8 CW jammers - Enbedded CGEE/SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. - Reacquisition Time: 0.1 second Hardware and Software - Based on the high performance features of the SiRFstarVâ?¢ low power single core logic. - Adaptive micropower controller - Only 50 to 500 A maintains hot start capability (core logic) -
Main equipment consist of mill roll stand, single facer, glue machine, double facer, slitter scorer, sheet stacking conveyors and so on. Auxiliary equipment, consist of rails and carriages, main drive, preheater, preconditioner, multiple preheater, glue preparing and supplying system, steam (or oil) heating system, compressed air system, electrical control system and so on. Optional equipment, consist of splicer, rotary shear, combining machine, scrap shredder, intelligent managing system and so on. We can provide top grade, medium grade and common grade production line to meet different requirements. Price, delivery time, moq are negotiable, please contact us for quotation.
LR9150 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance * GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy * High sensitivity navigation engine (PVT) tracks as low as - GPS : -165 dBm - GLONASS : -161 dBm * 52 track verification chann els * SBAS (WAAS or EGNOS,MSAS) * Active Jammer Remover, removes in-band jammers up to 80 dB-Hz * Tracks up to 8 CW jammers * Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support. * Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. * SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. * Reacquisition Time : 0.1 second * RF Metal Shield for best performance in noisy environments Hardware and Software * Based on the high performance features of the SiRFstarV low power single core logic. * Adaptive micropower controller * Only 50 to 500�¼A maintains hot start capability (core logic) * < 10mW required for TricklePower mode * RoHS compliant (lead-free) * SMT pads allow fully automatic assembly processes equipment and reflow soldering * Advanced navigation features * Smart sensor supported by I�²C interface * External interrupt input for context change detection Advantages * Built-in LNA. * Built-in internal ROM and based on Firmware 5.5.X * It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc. * Maintain tracking sensitivity as low as GPS @ -165dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity) * Support SiRFaware technology * Support adaptive Micro Power Controller power management mode. * < 10mW TricklePower, so user can leave power on all day instead of power off. * Suitable for battery drive devices that need lower power consumption application * Cost saving through elimination of RF and board to board digital connectors * Flexible and cost effective hardware design for different application
Features: - SiRF Star V ultra low power chipset - GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy - Compact module size for easy integration : 15 x 14 x 2.8 mm The Ct-G551 GPS module is a high sensitivity, low power, Surface Mount Device (SMD) that fully utilized SiRFstarV upgraded features. This 48-channel Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) receiver is designed for a wide range of OEM applications and is based on the GPS signal search capabilities of the SiRFstarV CSRG05e ROM chipset, Sirf's newest chipset technology. The Ct-G551 provides flexible bus interfaces (UART). The Ct-G551 is designed to allow quick and easy integration into GPS-related applications such as: -Mobile gaming -Cellular handsets -Cameras -Asset tracking -Other location-aware consumer devices Premium on-chip software provides a new level of continuous location awareness by employing -Opportunistic ephemeris decode and advanced power management, which enable the GPS receiver to stay in a hot-start condition nearly continuously while consuming very little power -Full support for client-based and server-based SiRFInstantFixTM -Dynamic contextual awareness, temperature monitoring, and MEMS sensors that work in concert to conserve power and boost performance -Use of software control modules to achieve power saving state SiRF V GPS Module Features Performance -Highest performance Solution: -GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy -High sensitivity navigation engine (PVT) tracks as low as - GPS:-164dBm - GLONASS:-161dBm -48 track verification channels -SBAS (WAAS or EGNOS,MSAS) -Active Jammer Remover: -Removes in-band jammers up to 80 dB-Hz -Tracks up to 8 CW jammers -Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted)-Need operator support -Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. -SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. -Reacquisition Time: 0.1 second -RF Metal Shield for best performance in noisy environments Hardware and Software -Based on the high performance features of the SiRF Star V low power single chipset. -Adaptive Micropower Controller: -Only 50 to 500gA maintains hot start capability -
The DS-354 utilized SiRFstarV â?¢ and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications. Performance â?¢ GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy â?¢ High sensitivity navigation engine (PVT) tracks as low as GPS : -165dBm, GLONASS : - 161dBm â?¢ 52 track verification channels â?¢ SBAS (WAAS or EGNOS,MSAS) â?¢ Active Jammer Remover, removes in-band jammers up to 80 dB-Hz â?¢ Tracks up to 8 CW jammers â?¢ Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) â?? Need operator support â?¢ Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds. â?¢ SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode. â?¢ Reacquisition Time: 0.1 second â?¢ RF Metal Shield for best performance in noisy environments Hardware and Software â?¢ Based on the high performance features of SiRFstarVâ?¢ low power single core logic. â?¢ Adaptive micropower controller â?¢ Only 50 to 500�¼A maintains hot start capability (core logic) â?¢ < 10mW required for TricklePowerâ?¢ mode â?¢ RoHS compliant (lead-free) â?¢ Advanced navigation features â?¢ Smart sensor supported by I�²C interface â?¢ External interrupt input for context change detection â?¢ MMCX RF Connector â?¢ Dimension : 36 x 24 x 10.5 mm
Bauxite Used for Aluminum Production. Bauxite is the principal ore of aluminum.
Used in the production of electrical conductors, switches, transformers, and telecommunications.
Crude oil is a naturally occurring, unrefined petroleum product composed of hydrocarbon deposits and other organic materials. A type of fossil fuel, crude oil can be refined to produce usable products such as gasoline, diesel and various forms of petrochemicals.
