Emergency shower, emergency eyewash, extraction arm hood, mobile filtration system.
Extraction Arms- Local extraction system for a clearer working environment. Installation of fume extraction systems at the source of the pollution during the working processes prevent the spread of polluted air into the surroundings. The arms are connected to a vacuum fan and filter device removing the contaminants from the extracted air so that it can be exhausted to the atmosphere. A local extraction system is the best solution for a clean working environment. -Easy operationsENSHINE extraction arms are easy to remove and position. The extraction arm is easy to adjust for capturing the source of the pollution during the work processes. Additional, the extraction arms are quickly mounted with different brackets for wall, ceiling or table. -AdvantagesCan be wall, bench or ceiling mounted, and connected with ENSHINE filtration systems.ENSHINE extraction arms are easy to adjust for workers wanting to capture fume or dust smoke at source.A wide range of accessories give unlimited possibilities to match the needs at any workplaces and to help extraction work more efficient.Solid structure and easy to be folded out when not in use. -Material VersionsENSHINE extraction arms are available in two material versions, aluminum (AL) and chemical resistant plastic (CR). The choice of material version depends on work environment and type of pollution.Chemical Resistant Plastic (CR)ENSHINE chemical resistant extraction arms are suitable for work areas with special requirements for chemical resistance. The CR extraction arm consists of PVC tubes and joints of red Polypropylene.Aluminum (AL)ENSHINE aluminum extraction arms are suitable for environments with no special demands for chemical resistance or insulation. The AL extraction arm consists of aluminum tubes and joints of red Polypropylene. -ApplicationsENSHINE range of extraction arms covers a wide variety of applications as following.LaboratoryVocational schoolChemical industry UniversityPharmaceutical industry Laser techniquesFood industry Eliminate smoke, gas, dust, and particles
GR3660-B3 is a full-featured simple and easy dual bay storage device, along with RAID 0 (Striping), RAID 1 (Mirroring), and JBOD three application modes, with Super Speed USB3.0 transmission interface, not only with fast transmission performance but also easily content data safety with 16TB large storage capacity or information exchange requirement. GR3660-B3 internal use SATA III (6G) chip design and transform into the most easy to use USB3.0 (5G) interface, backwards compatible with USB 2.0 and USB 1.1, not only comprehensive range of usage but also leaving your data transfer without waiting to complete an instant. USB 3.0 performance will slight decrease due to maximum and fragmented data transfer mainly due to the transmission technology. In order to allow better transmission performance, GR3660-B3 add UASP function to transfer data without waiting for previous data transfer is completed before the current transmission data movement, and improved in CPU utilization, data delay and waiting . Model No. GR3660-B3 RAID chip JM561 Host Interface USB3.0 UASP RAID Level RAID 1 / RAID 0 / JBOD Support Hard Drive 2 x 2.5"-3.5" SATA III SSD/HDD (6.0 Gb/s) Single HDD Capacity Single HDD tested up to 8TB Rebuilding YES LED Indicators Power / HDD Access / HDD Failed / Rebuilding / Connection Status Fan 1 x 4cm Fan Power Supply 12V / 4A Adaptor Certification CE / FCC Operating System Windows�Mac & Linux Packing Content Power Adaptor / USB 3.0 Cable / Quick Installation Guide / Accessory Kit Dimension 120(W) x 64(L) x 220(H) mm Net Weight 0.83Kg HDD Capacity Single HDD tested up to 8TB RAID 0 Operating temperature 32° to 104° F (0° to 40° C) Storage temperature -4° to 116° F (-20° to 47° C) Relative humidity 5% to 95% noncondensing
The new SafeTank GT1670-SB3 (6G) is fitted with high-speed e-SATA (6G) and USB 3.0 (5G) interfaces, offering blazingly fast transfer speeds compared to USB 2.0. In addition, the USB 3.0 model is backward compatible with USB 2.0 for users who haven't yet upgraded to USB 3.0. The GT1670's newly designed removable drive trays can accommodate 3.5" HDDs, 2.5" SSDs, and 2.5" HDDs (supporting a range of widths including 15 / 12 / 9.5 / 9 / 7 mm) and combine the convenience of external plug and play drives with the advantages in stability offered by internal drives, enabling you to enjoy the best of both worlds and increased mobility. Model No GT1670-SB3 Interfaces e-SATA(6G) Port , USB3.0(5G) Port Compatible Drives 1 x 2.5�-3.5� SATA III ( 6.0 Gbits) HDD/SSD Raid Level 1 x Independent volume (JBOD) Operating System Windows, Linux, Mac Electrical and Operating * Line voltage: 100-240V AC Requirements * Frequency: 50Hz to 60Hz, single phase * Maximum continuous power: 24W * Operating temperature: 32° to 104° F (0° to 40° C) * Storage temperature: -4° to 116° F (-20° to 47° C) * Relative humidity: 5% to 95% noncondensing Dimension (H): 131 mm (W): 50 mm (D): 224 mm Wight: 1.6 kg Product Code EAN�4711132862270 UPC�884826502692 Carton 10 pcs per carton Package Accessories * GT1670-SB3 ( with Removable drive tray enclosed x 1 ) * e-SATA Cable x 1 * USB3.0 Cable x 1 * Adapter x 1 * Power x 1 * Accessory kit * User Manual x 1
Hp supply an extensive range of high quality wear resistant plates. Using the world famous japan kurimoto hardfacing welding patented technology, with welding materials produced by vautid gmbh, hp-plate has become professional expertise specializing in production and sales of hardfacing wear resistant compound plate. We offer plates with the following benefits: flat surface, nice looking, welding strength and good weldability. These extended plate lives and enabled the plant to increase safety and also reduced their inventory of spare parts. Wear plate, up plate.
Hp supply an extensive range of high quality wear resistant plates. Using the world famous japan kurimoto hardfacing welding patented technology, with welding materials produced by vautid gmbh, hp-plate has become professional expertise specializing in production and sales of hardfacing wear resistant compound plate. We offer plates with the following benefits: flat surface, nice looking, welding strength and good weldability. These extended plate lives and enabled the plant to increase safety and also reduced their inventory of spare parts.
Screw with washer assembly. Head Type: Pan Head, Ind Hex Head, Hex Head, Ind Hex Washer Head, Truss Head, Fillister Head, Binding Head...etc. Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass. Standard: IFI, JIS, ISO, DIN, BS. Size Range: M1.4-M12, #0-1/2 Length Range: 3MM-125MM, 3/16-5". New Styles and customer designs are welcome.
Screw with washer assembly. Head Type: Pan Head, Ind Hex Head, Hex Head, Ind Hex Washer Head, Truss Head, Fillister Head, Binding Head...etc. Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass. Standard: IFI, JIS, ISO, DIN, BS. Size Range: M1.4-M12, #0-1/2 Length Range: 3MM-125MM, 3/16-5". New Styles and customer designs are welcome.
Screw with washer assembly. Head Type: Pan Head, Ind Hex Head, Hex Head, Ind Hex Washer Head, Truss Head, Fillister Head, Binding Head...etc. Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass. Standard: IFI, JIS, ISO, DIN, BS. Size Range: M1.4-M12, #0-1/2 Length Range: 3MM-125MM, 3/16-5". New Styles and customer designs are welcome.
Screw with washer assembly. Head Type: Pan Head, Ind Hex Head, Hex Head, Ind Hex Washer Head, Truss Head, Fillister Head, Binding Head...etc. Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass. Standard: IFI, JIS, ISO, DIN, BS. Size Range: M1.4-M12, #0-1/2 Length Range: 3MM-125MM, 3/16-5". New Styles and customer designs are welcome.
Main Technical Specification - Frequency Range (MHz) : 434 - Bandwidth (MHz) : ±3 - VSWR : 2.0 - Gain(dBi) : 1.80 - Max Input power (W) : 50 - Input Impedance () : 50 - Polarization Type : Vertical - Antenna Length(mm) : 88mm(90) / 108mm (180) - Connector Type : SMA
AFM series flow transmitters are advanced instruments that transmit flow rate signal from flow sensors to PLC or to control devices in process control systems. The unit accepts flow sensors with pulse output. It offers both analog and digital output for a wide range of applications. apporx. 96x96x96(mm), 350g
Sems Screw with washer assembly. Washer type: spring lock washer, external tooth lock washer, internal tooth lock washer, flat washer, square washer, cup washer, DIN 6904, DIN6905, wave washer, square dome washer, conical washer, special washer. Material: Carbon Steel, Alloy Steel, Stainless Steel, Brass. Standard: IFI, JIS, ISO, DIN, BS. Size Range: M1.4-M12, #0-1/2 Length Range: 3MM-125MM, 3/16-5". New styles and customer designs are welcome.
A9500N is one of the smallest NB-IoT modules in LCC castellation packaging with the compact size of 24.0 Ã?? 26.0 Ã?? 2.3mm, ultra low power consumption and extended temperature range. Designed for use in NB-IoT network, A9500N enables connect to the Internet at DL and UL data speed up to 200kbps. In the area where NB-IoT service are not available, A9500N still enables reliable and secure data connect over EGPRS network. To save space on the application platform, A9500N comes as an extremely slim and compact module. This makes it ideally suited for a broad range of mobile computing devices, and particularly offers easy integration with AMI, Security, Intelligent Buildings and other M2M application. General features * NB-IoT Tri-bandB3/B5/B8 * EGPRS Dual-bandB5/B8 * Control via AT commands(GSM07.05,GSM07.07,V.25TER,GPRS, and enhanced AT commands) * Supply voltage range 3.1V-4.2V * Low Power consumption - eDRX mode:
EDAM-8024 4 analog output and 4 digital input channels module * 4 isolation analog output channel . * 14 bits Analog Resolution * Programmable voltage/current range with slew rate. * 4 channels isolation digital input * 3000 Vrms isolation voltage for A/O channel * Programmable power-on value and safe value * Programmable host watchdog timer for host failure protection. * Support ASCII format and Modbus-RTU protocol
4 analog output and 4 digital input channels module * 4 isolation analog output channel . * 14 bits Analog Resolution * Programmable voltage/current range with slew rate. * 4 channels isolation digital input * 3000 Vrms isolation voltage for A/O channel * Programmable power-on value and safe value * Programmable host watchdog timer for host failure protection. * Support ASCII format and Modbus-RTU protocol
CSC-5500 Multi Input Scaler has Composite Video, Component Video, PC (VGA), and HDMI inputs and can switch and scale the signal to HDMI or VGA with audio outputs. It supports HDMI output resolutions up to 1080p/ WUXGA and Analog Digital Conversion (ADC) and Digital Analog Conversion (DAC) allowing a wide range of AV signals to be displayed on a HDMI or VGA display. Further, the On-screen Display (OSD), IR remote, RS-232, IP and on-panel controls make this product very versatile.
***5-Port 10/100TX Slim Industrial Ethernet Switch*** | Extended Operating Temperature -40° ~ 80° C (-40° ~ 176° F) | Store and Forward Switching Architecture | Flow Control on Full-Duplex | Back Pressure on Half-Duplex | Supports Auto MDI/MDI-X Function | Wide-Ranging Redundant Power Design | UL Class I, Division 2 Certified | DIN-Rail and Wall Mount Design | Slim IP-30 Case Design |
1. Current tripping setting i!£g & display 2. Tripping time setting t!£g & display 3. Prealarm set-point setting al. & display 4. Function button 5. Setting & function selective button 6. Function setting button 7. Auxiliary supply presence 8. Prealarm display 9. Tripping display 10. Tripping test display 11. Reseting display 12. Tripping range:0.025~250a. 13. Tripping time: 0.02~500 second.
Specifications Operating environment (Receiver Unit) • Operating temperature range -20 deg to 80 deg C • Storage temperature range -20 deg to 85 deg C • Operating humidity 100% • Vibration 3.5mm 10 Hz in X,Y and Z direction. Power (Receiver Unit) • Power Required 12V DC (MiniDC jack) or Battery DC 3V • Battery Life: Approx. 6 Months • Battery type AAA 1.5V (x2). Dimensions Monitor (Receiver Unit) • Weight 60 g • Size L 63mm * W 42.5mm* D 20mm • LCD View size L 33.5mm * W 28.2mm. System (Receiver Unit) • System frequency at 433 MHz • Sensor pressure range 0-60 psi • Sensor pressure sensitivity ± 1.5 psi • Sensor temperature sensitivity ±2 deg C • Low power consumption in sensor • Transmission length: up to 10M (Can vary between vehicle's). Emissions (Receiver Unit / Sensors) • FCC Comply with part 15,Class B • CE • C Tick. Operating environment (Sensors) • Operating temperature range -40 deg to 125 deg C • Operating humidity 100% • Shock >1000G from 1.5m height • Vibration 10mm 5-200 Hz in X,Y and Z direction Power (Sensors) • Sensor is equipped with battery - CR1632 (3V) • Battery Life - Approx. 1 Year. Dimensions Sensor (Sensors) • Weight - 10g±1 g • Size - Diameter 18.5mm / Height 20mm.
