Bluetooth specification: bluetoothspecification v1.1 class i | bluetoothspecification v1.1 class ii
Bluetooth transmission power: +3 dbm (class 1) | +3dbm (class 2)
Rf radio range (reference): 100m (330 ft)in door| 10m (33 ft) in door
Resolution:min. 0.127 mm (5mil)
Pcs:valueup to 0.45
Front focus: 40mm(5mil barcode at 0.9 pcsvalue)
Depth of field: 0-90mm(16mil barcodeat0.9pcs value)
Light source: 630nm red led lamp
Read sensor: linear ccd imagesensor
Scanning performance:150 scans/sec
System indicator :green led for barcodegoodread blue led for bluetooth communication: red led for battery power condition
Working temp: 5 - 50 ( no frost)
Working humidity: 10% - 90% rh
Drop durability: 1m drop ontoconcretesurface
Battery capacity: 20000 scans at normalaa type battery
Weight:85g ( without battery )
Rfi/emi:fcc class a / ce
Battery:aa type battery x 2
Battery power consumption: 200-260ma (atbattery2.4v)
Standby: 0 ua
Light source: 650 nm visible laserdiode(lvd)
Depth of field: 0-200 mm for upc/ean100%
Scan patten: 5 directions of scanfield
Scan rate omni directional: 1400 scans per second;single-line 74 scans per second
Number of scan lines: 20
Minimum bar width: 5 mil pcs 90%
Print contrast: 30% upc/ean 100%
Indicators:(led)two-color led (blue & red)
Beeper operation: programmable tone& volume
System interfaces: keyboard wedge rs-232usb wand emulation
Height:110.9 mm
Depth:65.8 mm
Width:70.0 mm
Weight:200 g (fixed stand included)
Cable:standard 2 m straight
Input voltage:5 vdc + - 10%
Power consumption:1.0 watts
Operating current:200 ma typical
Laser class: cdrh class lla; iec 60825 class 2
Emc:ce en55022 b . Fcc part 15 class b . Vcci . Bsmi
Operating temperature: 0¦c - 40¦c (32¦f - 104¦f)
Storage temperature: 20¦c - 60¦c (-4¦f - 140¦f)
Humidity:5% -90% rh (no dewing allowed)
Light levels: up to 4500 lux(fluorescence)
Shock:designed to withstand 1.5 m drops
1d barcodes: upc/ean/jan. Upc/eanwith supplementary. Jan 8 & jan 13. Isbn/issn. Japanese bookland ean. Code39. Code 39 with full ascii. Trioptic code 39. Codabar (nm7). Code 128. Code128 with full ascii. Code 93. Interleaved 2 of 5 (itf). Addendum 2 of 5. Iatacode. Msi/plessy. China postal code. Code 32
We are able to supply with you for refurbished 64MB, 128MB computer SDRAM,
All of these items are tested and workable, Our factory is in Taiwan and we also have an office in the mainland of china.
UHF600~960MHz, Single channel 16 user selectable channel / USB device , Audio Inputs : 3.5Ø Line in Jack/6.3Ø microphone Jack, Charger time
Approx. 4.5 hours, Operating time : 2~8 hours (Depending on the volume)
Power supply: Built in 12V/2.7Ah Lead-acid battery x1, and 19V/2.63A/100-240V AC adaptor
1. Fashion yet Elegant appearance, Six colors can be chosen (Black, Blue, Green, Yellow, Rosy, Violet)
2. Delicate and small, easy to port.
3. One button to record and easy to operate.
4. Long time recording,can continue recording about 20 hours after one fully charge.
5. Can be remove from the wristband then use as a keychain recorder.
6. Recording Time:
4GB:about 70 hours
8GB:about 140 hours
16GB:about 280 hours
Internal MIC with high sensitive & non directive
Multi Audio format support : Record : DM3,WAV, ADPCM
Play back : DM3,WAV, WMA, ADPCM
Recording Media : Micro SD
BuiltIn Exterior Speaker
Monitoring on recording By Ear phone & Speaker
Fast data transference via USB 2.0 interface
Hold key for prevention of accidental operation
THY Precision Medical Micro Molding offers medical micro molding services meets ISO 13485 certified and Class 100K clean room requirements.
At THY Precision, we understand that molding for the medical industry requires the highest levels of repeatability, accuracy and quality. We are prepared to satisfy our medical clients' exacting needs:
1. Apply for disposable medical consumables and laboratory supplies.
2. Medical device qualification ISO 13485 certified and Class 100K injection clean room to ensure high and steady quality.
3. Highest quality medical micro plastic injection molded components.
4. Medical grade titanium alloy used to manufacture highly specialized medical implants.
5. CNC equipment enables manufacturing high quality, precise medical devices and components.
THY Precision provides OEM medical plastic micro parts:
As the medical field demands smaller and smaller sizes, it is our goal to continue to provide a wide range of minimally invasive micro medical components. We specialize in plastic medical devices including chamber filters, dialyzer filters, caps and pump connectors, intravenous infusion drip components, bacteria filters, laboratory consumables, injector cartridge for IOL surgery... etc.
THY Precision manufactures custom medical grade implants:
Titanium medical devices we have made include: spinal implants, bone plates, surgical instruments, artificial joint, knee replacement, blood collection needle, medical shell, medical sterilization accessories, etc.
Antenna Size¡G 90.8mm(Dia) ¡Ñ 109mm(H)This series of Iridium antennas is specifically designed to provide excellent coverage in the 1610 to 1630 MHz range.
2862 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
