JAF - 1000H 105C, DF at Max 10% BP Axial Aluminum Elec. Capacitors for Audio System Specifications
Items Performance Characteristics JAF - 1000H 105C, DF at Max 10% BP Axial Aluminum Elec. Capacitors for Audio System
Operating Temperature Range (�°C) -40â??~+105â??
Capacitance Tolerance ±10%
Leakage Current (A) MAX. 0.03CV + 3A After 5 minutes application of rated working voltage
MAX Dissipation Factor MAX 10% at 120Hz
Size 120 x 120 x 38mm (4.71 x 4.71 x 1.50inch)
Motor Shaded Pole
Frame Aluminum Die-Cost
Impeller PBT + 30% Fiber Glass. UL94V-0
Lead Wire 1007# 22AWG. UL/CSA
Insulation Resistance
Min 10 M 0hm at 500VDC Between Terminal and the Frame
Dielectric Strength 1 min at 1,500VAC 50/60Hz
Bearing Type B: 2 Ball Bearing. S: Sleeve Bearing
Operating Temp Ball Bearing: Within -20 ~ 80°C Sleeve Bearing: Within -10 ~ 56°C
Life Expectancy Ball Bearing: 50,000 hours at 60C
Sleeve Bearing: 20,000 hours at 45°C
Net Weight 520 grams
The X. Y& Z axis utilize AC servo motor.
Auto-positioning and multi cavities machining.
Program function
The Circle Angle of Sparking is lower than 0.02mm
The best surface roughness (Ra) is better than 0.1 ;m.
High speed and long distance jumping.
Special Rib shape machining function.
The ear muff is designed to protect from the hazard harmful noisy. Comes with soft foam cushions which provides comfort seal to the skin and will not lead to allergic reaction. Lightweight and suitable for industrial workers who need to wear ear muff for a long time per day. Recommended for landscaping, construction, shooting and power equipment operators. Features low cost but good performance.
Additional foam pad for headband also available (model no.: SM-309A).
Foam cushions replaceable.
Pass : CE EN352-1, ANSI S3.19
SNR: 27.5dB NRR: 21dB
CUL-01 Ultrasonic Speaker has 33 ultrasonic emitters to avoid unauthorized cell phones to
record crucial and confidential information during meetings. It has unattractive appearance and
is suitable to be placed in a room or can be portable to work because of its built-in battery inside.
The best interfering microphone performance when CUL-01 emitters exactly face a phone
speaker because the emitters affects the microphone directionally.
Specification
Ultrasonic emitters:33 pcs
Dimension: 315mm 57mm 55mm
Operation time with built-in battery:2.5hrs
Remote control to turn on /off the device
GPS/GNSS/GALILEO/SBAS Module
The Ct-G354 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy
High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm
52 track verification channels
SBAS (WAAS or EGNOS,MSAS)
Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
Tracks up to 8 CW jammers
Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) �?�¢?? Need operator support
Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
Reacquisition Time: 0.1 second
RF Metal Shield for best performance in noisy environments
Hardware and Software
Based on the high performance features of SiRFstarV low power single core logic.
Adaptive micropower controller
Only 50 to 500�¯�¿�½?�?�¼A maintains hot start capability (core logic)
< 10mW required for TricklePower mode
RoHS compliant (lead-free)
Advanced navigation features
Smart sensor supported by interface
External interrupt input for context change detection
MMCX RF Connector
Dimension : 3
Ct-G551 3.3V utilizes SiRFstarV and features
Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
- GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
- High sensitivity navigation engine (PVT) tracks as low as :
- GPS : -165 dBm
- GLONASS : -161 dBm
- 52 track verification channels
- SBAS (WAAS or EGNOS,MSAS)
- Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
- Tracks up to 8 CW jammers
- Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
- Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
- SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
- Reacquisition Time : 0.1 second
- RF Metal Shield for best performance in noisy environments
Ct-G340 S5 of products utilizes SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family deliver highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Advanced low power technology means there is no need to maintain full power to achieve maximum performance nor turning the GNSS receiver completely off to save power. It breaks then old GNSS performance vs. power trade-off through the fusion of a new high-performance GNSS engine, advanced power management and a smart sensor interface to achieve high sensitivity hot-start conditions for fast location fixes.
Performance
- GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
- High sensitivity navigation engine (PVT) tracks as low as
- GPS : -165 dBm
- GLONASS : -161 dBm
- 52 track verification channels
- SBAS (WAAS or EGNOS,MSAS)
- Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
- Tracks up to 8 CW jammers
- Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
- Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
- SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
- Reacquisition Time : 0.1 second
- RF Metal Shield for best performance in noisy environments
Hardware and Software
- Based on the high performance features of the SiRFstarV low power single core logic.
- Adaptive micropower controller
- Only 50 to 500A maintains hot start capability (core logic)
Ct-G353 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
- GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
- High sensitivity navigation engine (PVT) tracks as low as
- GPS : -165 dBm
- GLONASS : -159 dBm52 track verification channels
- SBAS (WAAS or EGNOS,MSAS)
- Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
- Tracks up to 8 CW jammers
- Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
- Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
- SiRFGeoRecovTM Reverse EE makes position power saving mode.
- Reacquisition Time : 0.1 second
- RF Metal Shield for best performance in noisy environments
Hardware and Software
- Based on the high performance features of the SiRFstarV low power single core logic.
- Adaptive micropower controller
- Only 50 to 500A maintains hot start capability (core logic)
- < 10mW required for TricklePower mode
- RoHS compliant (lead-free)
- Advanced navigation features
- Smart sensor supported by IC interface
- External interrupt input for context change detection
- Dimension : 20 x 20 x 7 ± 0.5mm
Advantages
- Built-in LNA.
- Built-in internal ROM and based on Firmware 5.5.X
- It can remove in-band jammer up to 80db-Hz and track up to 8CW jammers, so the module can prevent GPS signal interference when design-in the electrical device with noisy electrical signal interferences such as Laptop, mobile phone, DSC, etc.
- Maintain tracking sensitivity as low as GPS @ -163dBm, GLONASS @ -161dBm, even without network assistance. (SiRFstar III has only -159dBm sensitivity)
- Support SiRFaware technology
- Support adaptive Micro Power Controller power management mode.
- < 10mW TricklePower, so user can leave power on all day instead of power off.
- Suitable for battery drive devices that need lower power consumption application
Ideal for high volume mass production(Taping reel package)
- Cost saving through elimination of RF and board to board digital connectors
- Flexible and cost effective hardware design for different applications
- Embed CGEE (Client Generated Extended Ephemeris) that can capture ephemeris data from satellites locally and predicts ephemeris up to 3 days. So if the module was off within 3 days, it could complete the positioning process with limited time just like hot start.
GPS/GNSS/GALILEO/BDS Module
The Ct-G153 utilized SiRFstarV and features Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Performance
- GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy
- High sensitivity navigation engine (PVT) tracks as low as GPS:-165dBm,GLONASS:- 161dBm
- 52 track verification channels
- SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN)
- Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
- Tracks up to 8 CW jammers
- Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted) - Need operator support
- Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds
- SiRFGeoRecovTM Reverse EE makes positioning process being done under power-saving mode.
- Reacquisition Time: 0.1 second
Hardware and Software
- Based on the high-performance features of SiRFstarV low power single core logic.
- Adaptive micropower controller
- Only 50 to 500 A maintains hot start capability (core logic)
- < 10mW required for TricklePower mode
- RoHS compliant (lead-free)
- SMT pads allow fully automatic assembly processes equipment and reflow soldering
- Advanced navigation features
- Smart sensor supported by I2C interface
- External interrupt input for context change detection
- Dimension : 11.2 x 10 x 2.3 mm
GPS Mouse provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies.
Thanks to the low power consumption technology, the GPS Mouse U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc.
Features
- 72 channel Ublox M8 positioning engine.
- Ultra high sensitivity to -167 dBm.
- GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support.
- Supports GLONASS and is ready for Galileo.
- Supports UART, USB and RS232 interface.
- Up to 10 Hz update rate.
- LED indicate location fix.
- Ultra low power consumption.
Ct-GM551 of products utilizes SiRFstarV and feature Quad-GNSS for tracking GPS, GLONASS, BDS and Galileo satellites. The product family delivers highly accurate continuous location, advanced power management and high interference immunity. These continue to push the envelope of performance in sensitivity, TTFF and urban canyon availability and accuracy. With a built-in DSP and extremely low power consumption, the family can get fast location fixes for geo-tagging images or videos, asset tracking and wearable applications.
Features/Performance
- GPS, GLONASS, Galileo, BDS and SBAS reception for high GNSS availability and accuracy
- High sensitivity navigation engine (PVT) tracks as low as
- GPS : -165 dBm
- GLONASS : -161 dBm
- 52 track verification channels
- SBAS (WAAS, EGNOS, QZSS, MSAS, GAGAN)
- Active Jammer Remover, removes in-band jammers up to 80 dB-Hz
- Tracks up to 8 CW jammers
- Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted), need operator support.
- Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
- SiRFGeoRecovTM Reverse EE makes positioning process being done under power saving mode.
- Reacquisition Time : 0.1 second
- RF Metal Shield for best performance in noisy environments
Features/Hardware and Software
- Based on the high performance features of SiRFstarV low power single core logic.
- Adaptive micropower controller
- Only 50 to 500 A maintains hot start capability (core logic)
-
A wide variety of precision, high quality cold forged and machined parts to the automotive industry. Using the latest in forging technology, we currently have the capacity to produce more than ten million cold forged parts per year. To provide additional value to our customers, we also have the capability to provide finished, machined parts, or semi-machined parts, after the cold forging process.
cold forge Top Plate (Washer) and Pole piece (T-Yoke) for Loud-Speaker and alarms raw driver We offer a complete range of Top Plate (Washer) and Pole piece (T-Yoke) uses in Home speaker, P.A. Speaker, Car speaker, Hi-Fi speaker, Sub-woofer,Car alarms and U-Yokes uses in raw Neodymium (NdFeB) speaker, tweeter etc.
DS-GM451 U8 is a GPS Mouse receiver build-in well-known Ublox 8 GPS chipset.
DS-GM451 U8 provides customer high position, velocity and time accuracy performances as well as high sensitivity and tracking capabilities. Customers benefit from the strength of both companies.
Thanks to the low power consumption technology, the DS-GM451 U8 is ideal for many portable applications such as PDA, Tablet PC, smart phone, automotive etc.
Features
- 72 channel Ublox M8 positioning engine.
- Ultra high sensitivity to -167 dBm.
- GPS L1C/A, SBAS L1C/A, QZSS L1C/A and Galileo E1B/support.
- Supports GLONASS and is ready for Galileo.
- Supports UART, USB and RS232 interface.
- Up to 10 Hz update rate.
- LED indicate location fix.
- Ultra low power consumption.
Features:
- SiRF Star V ultra low power chipset
- GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy
- Compact module size for easy integration : 15 x 14 x 2.8 mm
The Ct-G551 GPS module is a high sensitivity, low power, Surface Mount Device (SMD) that fully utilized SiRFstarV upgraded features. This 48-channel Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) receiver is designed for a wide range of OEM applications and is based on the GPS signal search capabilities of the SiRFstarV CSRG05e ROM chipset, Sirf's newest chipset technology. The Ct-G551 provides flexible bus interfaces (UART).
The Ct-G551 is designed to allow quick and easy integration into GPS-related applications such as:
-Mobile gaming
-Cellular handsets
-Cameras
-Asset tracking
-Other location-aware consumer devices Premium on-chip software provides a new level of continuous location awareness by employing
-Opportunistic ephemeris decode and advanced power management, which enable the GPS receiver to stay in a hot-start condition nearly continuously while consuming very little power
-Full support for client-based and server-based SiRFInstantFixTM
-Dynamic contextual awareness, temperature monitoring, and MEMS sensors that work in concert to conserve power and boost performance
-Use of software control modules to achieve power saving state
SiRF V GPS Module Features
Performance
-Highest performance Solution:
-GPS, GLONASS, Galileo and SBAS reception for high GNSS availability and accuracy
-High sensitivity navigation engine (PVT) tracks as low as
- GPS:-164dBm
- GLONASS:-161dBm
-48 track verification channels
-SBAS (WAAS or EGNOS,MSAS)
-Active Jammer Remover:
-Removes in-band jammers up to 80 dB-Hz
-Tracks up to 8 CW jammers
-Multimode A-GPS (Autonomous, MS-Based, and MS-Assisted)-Need operator support
-Embedded CGEE / SGEE (With back-end server support) speed up TTFF a lot and makes cold start time to be around 20+ seconds.
-SiRFGeoRecovTM Reverse EE makes positioning process being done under power
saving mode.
-Reacquisition Time: 0.1 second
-RF Metal Shield for best performance in noisy environments
Hardware and Software
-Based on the high performance features of the SiRF Star V low power single chipset.
-Adaptive Micropower Controller:
-Only 50 to 500gA maintains hot start capability
-
