SIGMA Fiber Cement Board presents the art of Germany know-how as a high quality building material. It contains inorganic raw materials such as cement, silica powder and reinforced cellulose fiber as the main materials. All SIGMA boards are autoclaved to become stable product. SIGMA Fiber Cement Board does not contain any of asbestos fiber, however, it has strong bending strength like those with asbestos. SIGMA Fiber Cement Board can be applied not only for the interior use but also for the outdoor wall system. It has low water absorption rate and high impact resistant ability. These good advantages make it suitable for any purposes of applications. Suntai-Fuji calcium silicate board is a light weight, high quality building material. It is developed and know-how authorized from Japan and produced in Taisyou. This product contains inorganic raw materials and reinforced cellulose fiber as the main materials. Some materials are from the recycling powder or power plant waste powder, therefore, it is Green-Label product. Due to the high temperature and pressure autoclaved process, it is very durable and stable. Suntai-Fuji does not contain any of asbestos fiber, it provides the safety needs for consumers. Most of the applications of Suntai-Fuji calcium silicate board were on the dry-wall partition, this type of partitioning system has only 20% of total weight compared to traditional RC wall. Some applications were used to protect the steel column beam in the SRC buildings.
Powerful milling machines is applied to process household hardware, bicycle parts and small accessories..
Sigma fiber cement board, suntai fuji calcium silicate board.OEM, ODM
Textile machinery.
Size:T-6.0, 30 T Stainless
Length: 7.8cm Thickness: 1.2mm Curved scissors Stainless
Feature: 1. Suit for product which with good flow ability. EX: Rice, Beans, Pet Food...etc 2. The machine can be connected with our repacking system 3. Load-cell weighing system: HBM 4. Pneumatic Cylinder: Bosch 5. Vacuum Pump: Busch 6. Sensor: Sick 7. Weighing Indicator: AND 8. PLC control system: Mitsubishi 9. Touch screen: Fuji 10. More than 20 sets of weighing memories, only need to touch the screen to change different size packs, no need to change any part 11. Adjustable for different size bags 12. The machine is designed with automatic malfunction detector, the malfunction will be shown on the touch screen and tell operator how to handle the problem.
Feature: 1. Suit for Product which with good flow ability. (Gravity Filling Type) EX: Rice, Beans, Corns, Seeds, Animal feed, Plastic Ganule...etc. 2. The machine can be connected with a bag closing machine 3. Load-cell weighing system: HBM 4. Pneumatic Cylinder: Bosch 5. Weighing Indicator: AND 6. PLC control system 7. Touch screen: Operating friendly 8. Single scale- Net weight 9. Design with a touch Screen, operating friendly 10. More than 20 sets of weighing memories, only need to touch the screen to change different size packs, no need to change any part 11. The machine is designed with automatic malfunction detector, the malfunction will be shown on the touch screen and tell operator how to handle the problem.
Feature: 1. Suit for Product which with good flow ability. (Gravity Filling Type) EX: Rice, Beans, Corns, Seeds, Pet feed...etc. 2. The machine can be connected with a bag closing machine 3. Load-cell weighing system: HBM 4. Pneumatic Cylinder: Bosch 5. Weighing Indicator: AND 6. PLC control system 7. Touch screen: Operating friendly 8. Single scale- Net weight 9. Design with a touch Screen, operating friendly 10. More than 20 sets of weighing memories, only need to touch the screen to change different size packs, no need to change any part. 11. The machine is designed with automatic malfunction detector, the malfunction will be shown on the touch screen and tell operator how to handle the problem.
Feature: 1. Suit for product which with poor flow ability. (Belt Filling Type) EX: Fertilizer, Mineral product, Sand, Concret...etc 2. The machine can be connected with a bag closing machine 3. Load-cell weighing system: HBM 4. Pneumatic Cylinder: Bosch 5. Weighing Indicator: AND 6. Gross weighing type 7. Touch screen: Operating friendly 8. PLC control system 9. Design with a touch Screen, operating friendly 10. More than 20 sets of weighing memories, only need to touch the screen to change different size packs, no need to change any part. 11. The machine is designed with automatic malfunction detector, the malfunction will be shown on the touch screen and tell operator how to handle the problem.
Mini milling machine Chiung yang has strived to produce powerful milling machines for over 20 years and won praises due to the stable quality and rapidly product delivery in taiwan . Our milling machineis applied to proces household hardware, such as bicycle parts, small accesories and so on. We have several models available for different working duties and customizing current products to fulfill customer special needs. Cy-mm-1/3 Suitable for procesing small hardware item . Type cy-mm-1/3 Machine height 850mm Working surface of table 415 x110mm Max.Transversal travel 120mm Max. Longitudinal travel 160mm Max. Vertical travel 150mm Max. Cutter outside diam 130á· Max. Cuttetr length 100mm Max. Cutter thicknes 2 Drive motor 1/2hp Mandrill Number of spindle speeds 550 340rpm Machine weight 110kg Measurement-0.1 500x600x900mm Measurement-0.1 500x600x900mm
Metal detector Voltage detection Stud detection Metal detection Audible and visual indication Operates on a 6f22.9v battery Double shell blister card
Gd-n1: dia 0.9~1.6x l10~25mm= speed 550 pcs/minute Gd-n2: dia 1.6~2.7x l25~51mm= speed 450 pcs/minute Gd-n3: dia 2.8~3.4x l51~75mm= speed 350 pcs/minute Gd-n4: dia 3.4~4.2x l75~100mm= speed 260 pcs/minute Gd-n5: dia 4.2~5.0x l100~120mm= speed 240 pcs/minute Gd-n6: dia 5.0~6.0x l120~180mm= speed 170 pcs/minute
The ekt-2000dpr dynamic processing rheometer is a newest technology rubber-testing instrument, which measuring the viscosity and elastic of polymer properties by dynamic mechanical testing system. Our dynamic rheometer is designed with rotorless (moving die) cavity structure and provides dynamic, strain, modulus measurements in different temperature condition. Using this instrument can create not only better product quality it!|s also very suitable for laboratory institution of detail research & development of rubber compound.D.
Auto sample feeding structure- computer controlled auto sample feeding structure enables the user to put 30 pieces (or more pieces depending on request) of samples. According to settings of compound information and sequence, the sample can be automatically send into the die cavity for testing and take it out automatically from die cavity after finishing test. It can reduce the work of user would be controlled efficiently, and the testing time interval.
Ekt-2000s moving die rheometer (foam pressure) is work of the founder of ektron tek who is also the first computerized rheometer designer in asia. Designed and manufactured in accordance with astm d5289 & iso 6502 standards. The torque sensor is directly attached to the upper die to avoid friction and mechanical resistance which influence sensors' precision. The measured torque value is the real viscosity elastic property of compounds.
operators. Powerful database enables user to retrieve and review the rest result of tensile testers. Easy-edit function offers the user to design suitable report formats. Auxiliary calibration software and standard weights enable ser to periodically and easily calibrate this instrument. Other features of tensile tester software contain: (1) selectable x/y coordinates (2) per-set multiple sample thickness (3) selectable average calculation methods (4) the way of collection and calculation of the database inside the software could be increased or modified according to the client's request. Provide general used types of grips and sample cutting dies for customers to choose.
Oscillating disc rheometer of ektron tek!|s is designed in accordance with astm d2084& iso 6502 standards. More than 30 items of data, such as ml, mh, ts, tc and cri etc. It could be taken from each test. Cure curve provides the processing, vulcanizing, and vulcanized physical properties of rubber cross-linking reaction.
Durable metal material in aluminum / brass / stainless steel / steel / zinc alloy Standare size available. Size of hole center to hole center is 64mm / 96mm / 128mm / 160mm ..... Lots of options of size.
Stainless Size:T-6.0
