LED Streetlight Specification and strengths for us: 1. Energy saving, LSZM-LED lamps use HB high-power semiconductor light source with high efficiency, saving power more than 70% than conventional high-pressure sodium lamp, metal halide; 2. Environment friendly, LSZM-LED lamps don't have lead, mercury, and other highly toxic pollutants, pollution-free environment; to use environmentally friendly power supply design, power factor 0.98, harmonic í_ 0.1, without interference on the power grid; bad glare-free, non-life Habitat Light pollution; 3.Unique structure of the new design. The invention of modular light source; scientific rectangular design equipped with light distribution; the world's first street lights precincts optical system; patents and waterproof light lens design integration; cooling system and street lights shell design, cooling system, high-purity polymer materials, A small thermal resistance, and continued to light up the whole lamp temperature less than 56 degrees Celsius; 4, intelligent control systems. Current precision to ensure the efficiency of the LED light source an average of 90Lm / W; wide input voltage used all over the globe, 85 ~ 264V high and low intelligent switching, the same illumination; soft-start design, to avoid direct current to the LED chip impact on the effective protection of the LED, To extend its life span; 6 hours after the lights, automatic power by half, saving energy again; 5. four-way adjustment of lighting angles. For different types of road, the poles of different pitch, LSZM-LED lamps use four-way adjustment of the technical point of view (the world's original), a one-way road width of up to 16 meters, the farthest distance between the poles of up to 25 m.
Flood light 400W
Solar battery components: 1.5wp Light source: multi-color and super-illuminated LED Battery: 1600mAh Ni-MH, maintenance-free battery Controller: special controller for solar lamps Lighting time: 8-10 hours each night, 3-5 days on-end in cloudy or rainy weather Dimension and material: 500-600mm in height, cast aluminum, spraying-plastic
Solar panel: 100wp,monocrystalline silicon component Battery: 12V/120Ah, fully sealed and maintenance-free lead-acid battery Controller: 15A,special controller for solar lamps, protection against overcharge and over discharge, light control and time control Light source: 30W super-illuminated LED Illumination: 1500Lm Lamps post: 7m,steel, over striking and thickening, hot galvanization spraying-plastic Lighting time: fully charged lamps may work 6-10 hours a day (adjustable) and last 3-5 days on-end in cloudy or rainy weather Applicable temperature:-40íµ-50íµ
Operating Voltage:110-130V/60HZ,220-240V/50HZ Max Watt:175W Lamp:HPS 250-400W/E40 Material:Plastic(housing) Toughed Glass(Diffuser) Finishes:any RAL-color upon request IP Rating:IP 65
1.9 Meter steel lighting pole 2.Round steel pole 3.Double Bracket 3.Steel pipe ª¦114.3 mm(4í¦) 4.2mm wall thickness 4.Steel pipe ª¦166.1 mm(6í¦) 4.2mm wall thickness 5.Door opening for electrical connection 6.Base plate 400X400X20mm thickness 7 Anchor bolt M24X700 mm long.
Structural Feature 1. Housing cast by 900T die-cast machine, featuring high strength, compact structure and smooth profile. 2. Reflector is made of high purity aluminum plate anodized, polished. 3. Highly-transparent toughened glass shade, 5mm thick, arc-shaped, heat resistant. 4. Spring cramp for operation. Integrated design enabling the installation of the electrical parts inside the lamp. 5. Rear pedestal designed for both horizontal and vertical installation to suit the need of various places. Technical Parameters 1. Protection rating: IP66 2. Housings anti-corrosion property: class II 3. Working environment: -35ípC~+45ípC 4. Lamp holder: E40 5. Electric shock-proof rating: class I 6. Power source: 220V - 240V/50HZ,60HZ 7. Lamp: 150W -400W high pressure sodium/metal halide bulb
Structural Feature 1. Housing cast by 1800T Buhler die-cast machine, featuring high strength, compact structure and smooth profile. 2. Reflector is made of high purity aluminum plate extension-formed. 3. Top-lift cover for easy repair and maintenance. 4. Internal bulb-replacement structure for excellent water-and dust-proof property. 5. Highly- transparent toughened glass shade. Technical Parameters 1. Protection rating: IP66 2. Housings anti-corrosion property: class II 3. Working environment: -35ípC~+45ípC 4. Lamp holder: E40 5. Electric shock-proof rating: class I 6. Power source: 220V - 240V/50HZ,60HZ 7. Lamp: 150W-400W high pressure sodium/metal halide bulb.
1.10 meter aluminum pole 2. Wall thickness: 5mm 3.Cast aluminum decorative base 4.Door opening for fuse box
Ac100-240v /32.5w /2700-8000k /80lm/w /ip65
A.Led nominal power¦60w B.Luminous flux¦>5100lm C.Central illumination¦>28lux¿6m D.Average illumination¦>20lux¿6m E.Pole height¦6-8m F.Pole to pole distance¦30m G.Rated power¦82w H.Protection grade¦ip65 I.Color temperature¦2500k-5500k J.Environment temperature¦-25--+45 K.Working voltage¦ac100v---240v, 50hz/60hz L.Led working current¦350ma M.Power factor¦²0.9 N.Lamp weight¦10.5kg¿net weight O.Lamp size¦540mm*280mm*94mm P.Packing: 1pc/carton Q.Packing size:580mm*325mm*185mm R.Gross weight(lamp+carton):12kg
Solar road stud01 Power supply: solar power Power storage: battery or capacitor Operating time: shined for 8 hours with standard luminous intensity in one time can sustain power supply continuously for 72 hours Shining rate: 4hz f+20 percent Displaying colors: red, yellow and so on ¬ª10 led: 2 x 3 pcs super bright. View distance: over 1, 000 m Life in use: over 3 years used in a efficient way Temperature range: -20 fpc---- + 70 fpc Size: 110 ´ 88 ´ 23 mm Material of shell: aluminium alloy Weight: 550g (single-sided) and 520g (double-sided) Compression resistance: over 25 tons Key features: Two reinforced veins are designed on the top edges of it to not only strengthen compression resistance but also protect the solar panel against compression from traffic loads Solar panel, electronics and optics are fitted inside waterproof and unbreakable Two screw holes are designed on both sides so as to be fitted steadily with screws in road Adopting electronic element against high temperature and so to be suitable for high temperature area On the top edges of it are designed three grooves, which can be an access for rain water or sand or rock, so as to prevent the solar panel from abrasion Epoxy glue is filled in the shell. Easy, simple and steady to install like a standard road stud with two screws or glue in road Suitable for edge line of road
Lighting poles
Body: Pressure die-cast aluminum with stainless steel pins and toggle Modern wind resistant design. IP-65 dust tight and jet proof optical system Reflector: Anodized and sealed single piece high purity aluminum plate Cover: 5mm toughened glass, curved front glass Tilt angle of luminare adjustable 0 degree to 15 degree Easy access to lamp Easy access to gear Mounting pipe: ª¦48mm-ª¦60mm; Height: 6m-10m Finishing: RAL Optional Lamp size: Length: 695mm Width: 280mm Height: 180mm Lighting source: 150W-250W HPS 150W-250W MH Lamp base: E40 Application: Commercial area, industrial area, square yard, parking, shipside, garden area and so on.
Solar road stud 1. Model no: as-r001 2. Material: aluminum alloy and polycarbonate 3. Power: solar cell, 0.25 w 4. Power storage: battery or capacitor(the latest technology in power storage, has life expectancy of 100, 000 circles) 5. Led ¼¼8: 2pcs / side, 2 sides 6. Color: available with amber, blue, green, red or white 7. Light mode: constant / flash 8. View distance: more than 800m 9. Automatically starts to work when night falls or with the onset of inclement weather 10. With a complete charged, the light can continue flash 120 hours. For constant light model will continue bright for 84 hours. 11. Waterproof rating: ip68 12. Life time(with capacitor): more than 10 years life time(with battery): more than 3 years 13. Warranty period: 1 year 14. Compression resistance: >30tons 15. Heat resistance:- 40fªc to +80fªc Applications: -± wet roads Conventional reflective markers lose their visibility when the roads are wet. The solar road marker's active illumination remains brightly visible, unaffected by wet conditions -± foggy conditions High intensity led spotlights penetrate fog to help the driver to negotiate curves -± dark rural country roads Illumination from the solar road marker can eliminate the need for street lighting while maintaining safe driving conditions -±mountain roads Help show approaching sharp turns and blind curves at night-time. The markers can also be mounted on guard railing to provide even greater visibility on twisted mountain roads 1 pc / white box, 30pcs / carton, Carton size: 475 x 423 x 317 mm, N.W./g.W.: 17 kg / 18.5 kg
Solar road stud02 Power supply: solar power Power storage: battery or capacitor Operating time: shined for 8 hours with standard luminous intensity in one time can sustain power supply continuously for 72 hours Shining rate: 4hz f+20 percent Displaying colors: red, yellow and so on ¬ª5 led: 2 x 3 pcs super bright. View distance: over 1, 000 m Life in use: over 3 years used in a efficient way Temperature range: -20 fpc---- + 70 fpc Size: ¬ª116 ´ 21(h) mm Material of shell: pc plastic anti- uv material Weight: 270 g Compression resistance: 10 tons Key features: Round design creates good appearance while relieving the impaction from traffic load so as to be durable Combined size complying with the size of round post and saponaceous appearance, it can be installed at the top of round post at the cross, and make the cross clearer at night Two reinforced veins are designed inside to strengthen compression resistance Solar panel, electronics and optics are fitted inside waterproof and unbreakable According to requirement the number of led can be single light, double lights and three lights in one side, as well single light, double lights and three lights in both sides Two screw holes are designed on both sides so as to be fitted steadily with screws in road or round post Epoxy glue is filled in the shell. Easy, simple and steady to install like a standard road stud with two screws or glue, both in road and in round post Suitable for edge line of road 1 pc/ white box, 30 pcs/ carton Carton size: 475x 423x 317mm
Solar road stud03 Power supply: solar power Power storage: battery or capacitor Operating time: shined for 8 hours with standard luminous intensity in one time can sustain power supply continuously for 72 hours Shining rate: 4hz f+20 percent Displaying colors: red, yellow and so on ¬ª10 led: 2 x 2 pcs super bright. View distance: over 1, 000 m Life in use: over 3 years used in a efficient way Temperature range: -20 fpc---- + 70 fpc Size: 107 ´ 107 ´ 22.5 mm Material of shell: pc plastic anti- uv material Weight: 550g (single-sided) and 520g (double-sided) Compression resistance: over 8 tons Key features: Two reinforced veins are designed on the top edges of it to not only strengthen compression resistance but also protect the solar panel against compression from traffic loads Solar panel, electronics and optics are fitted inside waterproof and unbreakable Two screw holes are designed on both sides so as to be fitted steadily with screws in road Adopting electronic element against high temperature and so to be suitable for high temperature area On the top edges of it are designed three grooves, which can be an access for rain water or sand or rock, so as to prevent the solar panel from abrasion Epoxy glue is filled in the shell. Easy, simple and steady to install like a standard road stud with two screws or glue in road Suitable for edge line of road 1 pc/ white box, 30 pcs/ carton Carton size: 475x 423x 317mm
1, solar energy battery: monocrystalline silicon solarú+ 2, storage battery: highly reliable maintenance-freeú+ 3, lamp: 14w energy-saving lamp*twoú+ 4, control system: special intelligent controller, switch on automatically by light control, switch off by timer, battery over-current and over-discharge protection; 5, applied temperature:-20íµ¬ñ70íµ; 6, working hours:main lampí²4 hours , auxiliary lampí²6 hours, continuously work for 3-5 cloudy days (lamp can be designed to work corresponding to local sunshine time); 7, lamp height: 6-8m (special requirement is available).
The fixture are various types and they can be used with various type of lamps 2/2 feet, 1/1 feet
HID off Road light 2523 and 2522 Model No.: 7 7" Model No :2522 size : 257*207.4*143MM 9" Model No :2523 size: 285*255*161MM 35w HID H7 6000k with internal ballast color boxes
