Septic tank service Garbage disposal installation Outdoor plumbing system repair Plumbing leak detection Plumbing pipe repair Septic system installation Sewer repair Toilet installation BIO SEPTIC TANK
Septic tank service Garbage disposal installation Outdoor plumbing system repair Plumbing leak detection Plumbing pipe repair Septic system installation Sewer repair Toilet installation BIO SEPTIC TANK
Key Parameters Capacity: 2/3/5/7.5 m3 (customizable). Operating pressure: 0.8/1.6 MPa (up to 3.5 Mpa). Design temperature: -196/20 (inner vessel), -20/50 (outer vessel). Gas flow rate: 80-100 Nm3/h. Content: LNG, LOX, LIN, LAR, LCO2, LN2O.... Insulation: High degree vacuum, fiberglass paper. DOER's Microbulk tank systems are designed for small-scale industrial / medical / residential applications, ensuring on-site continuous supply of gases (natural gas, oxygen, nitrogen, argon, carbon dioxide, nitrous oxide...), saving the trouble of frequent refilling/replacement of cylinders & dewars, reducing costs and increasing safety. Microbulk tanks have a very similar structure with vacuum insulated storage tanks, comprising double layers/shells (stainless steel & carbon steel), vacuum insulation, storing the gas in liquid form at very low temperature under low pressure, and suitable for multiple types of gases. Meanwhile, microbulk systems integrate a small air heated vaporizer to enable the output of gas directly. Suzhou Doer Gas & Chemical Equipment (DoerCryo) specializes in Atmospheric Cryogenic Storage Systems (Full Containment/Vacuum-insulated/MicroBulk Tanks for LNG, LOX, LIN, LAR, LCO2, LN2O, LC2H4...), VPSA Oxygen Generators/Plant, & Air Separation Units (ASU). We're ISO9001, 14001, 45001, ASME certified, having rich experience working with large engineering/energy enterprises, having been well received home and abroad.
Tohatsu Fuel Tank 369-70316-4 for 4 / 5 model
Tohatsu New original Fuel tank for 2.5 / 3.5 model 309-70010-3
Plumbing leak detection Garbage disposal installation Toilet installation Outdoor plumbing system repair Plumbing pipe repair Sewer repair Toilet repair Septic system installation BIO SEPTIC TANK
Design Code: ASMEVIII-I Design Pressure: Up to 35 Mpa Material Code: From ASME & ASTM Diameter Range: Up to 4 Meter Length Range: Up to 50 Meter Available Material:CS, SS, Alloy, High Alloy Major Markets: Refinery, Petrochemical, Chemical, Offshore, Pharmaceutical, Marine industries As Per Exporting Package For Customers
For most farmers, water and fertilizer storage tanks play an important role in farming. This precious resource is the lifeblood of everything from crops to cattle. Reliable and on-demand water supply is essential for operational survival. The economics and forecasting of agriculture-related industries are critical. As one of the world's leading tank suppliers, we are committed to providing farmers and ranchers with agricultural and irrigation tank solutions to store water, chemicals, feed, whether it be soybeans, turf or sunflowers. Glass Fused to Steel agriculture water storage tanks are the leader of Water Storage Solutions, which is widely used as water and fertilizer storage tanks in Farm Plant. With the advantage of both GLASS and STEEL, Glass lined steel agriculture water storage tanks can resist corrosion of Waste Water of PH 1 - 14. About Center Enamel Co., Ltd Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel provides industry glass coated steel water storage tanks with AWWA D103-09 standards. Our factory glass coated steel water tank is a unique tank finish. Two materials are fused together to achieve the best of both materials the strength and flexibility of steel combined with the corrosion resistance of glass. Applied to both interior and exterior surfaces, Glass-Fused-to-Steel is able to provide many years of trouble free service in harsh environments. Center Enamel's GFS water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011, and our water tank engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone etc., to make sure the tank structure's adequate security in long-term service life. Advantage of GFS water tanks ---- Short construction period,low project cost; ---- Superior corrosion resistance, service life is more than 30 years; ---- Convenient installation, easy construction, good quality; ---- Beautiful appearance, color can be customized; ---- Not subject to weather conditions; ---- No need big installation equipment; ---- Easily expand, dismantle, move. About Us Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China, but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA etc. international standards. CEC Glass-Fused-to-Steel tanks are widely used in drinking/potable water, industrial effluents, municipal sewage, bio-energy, landfill leachate, agriculture etc. applications. Until 2018, Center Enamel Glass-Fused-to-Steel tanks have been exported to more than 60 countries including USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel Co., Ltd is the industry leader and has been designing and manufacturing and installing Stainless Steel Bolted frac sand storage tanks for more than 30 years. We provide high quality Stainless Steel Bolted frac sand storage tanks. The ability to place the bolted tanks in shipping containers allows us to service the entire world. With more than 10, 000 storage tanks successfully installed in 65 countries and thousands of applications, no other Asian company can match Center Enamelâ??s bulk tank experience in the design, manufacture and installation of bulk storage tanks .We are one of the few manufacturing companies that fabricates our own Stainless Steel Bolted frac sand storage tanks ensuring product quality. The construction speed of the Stainless Steel Bolted storage tank can be increased by three times, saving the construction and life cycle cost for our customer. All tank panels are manufactured in the factory and shipped in full to the construction site in time. Experience, expertise and efficiency make Center Enamel the best choice for buying frac sand silos . Our frac sand storage tanks capacity ranges from 20m�³ to 20,000 m�³, Our Stainless Steel Bolted storage tanks can withstand abrasive wear and have the longest service life of any tank. After decades of field testing and application, Center Enamel bolted steel frac sand storage tank is the best choice for all dry bulk storage tanks on the market. Stainless Steel Bolted Frac Sand Storage Tanks Specifications Coating color dark blue, dark green, white, and customized A standard steel plate size effective size 2400mm x 1200 m Steel plates thickness 3mm - 12mm, depends on the diameter & height Coating thickness 0.25mm - 0.4mm, two coatings internal and external Acid and alkalinity proof standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 Adhesion 3,450N/cm Elastic same as steel sheet, around 500KN/mm Hardness 6.0 Mohs Service life >30 years Spark test >1500 V Permeability gas and liquid impermeable Easy yo clean smooth, glossy, inert, anti-adhesion Corrosion resistance excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil, salt fox, organic and inorganic compounds
Center Enamel offers stainless steel storage tanks in a bolted tank design. Stainless steel bolted tank is assembled by stainless steel plates, bolts, special sealant, etc. It is an innovation in the installation of stainless steel welded tanks. The tank uses SUS304, SUS316L, and SUS444 stainless steel plates, which meet the national OCr18Ni19 sanitary inspection standards and have the characteristics of lightweight, low cost, environmental protection, and sanitation. Stainless steel bolted tank is one of the most widely used storage tank solutions and widely used in drinking water storage, food industry, agricultural irrigation, rainwater collection, firefighting water storage, industrial wastewater treatment, bio-energy, leachate storage treatment, municipal sludge storage, grain silos, etc. Stainless Steel Bolted Tank Advantages: Faster Installation: Compared with the stainless steel welded tanks, through the technical innovation of the installation, the stainless steel bolting tank installation is less affected by weather, and the installation cycle is easy to control, which greatly reduces the cost of construction. High Quality: The stainless steel bolted tank is made of the physical and chemical stable SUS304, SUS316L, SUS444 stainless steel plate, which has superior corrosion resistance, good sealing performance and service life of up to 30 years. Expansion Possibilities: Compared with stainless steel welded tank, stainless steel bolted tanks are easy to assemble, and can often be expanded to meet increased storage requirements.
fully inspected with safty valve protection under or over ground tank
Our bolted steel tanks are glass fused to steel tanks, which is mainly composed of steel sheet, special sealant, and the self-locking bolts. Glass-Fused-to-Steel technology is the premium coating technology in the storage tank market. The Glass-Fused-to-Steel technology adopts special steel for high strength enamel as the base material. By professional enameling technology, the high inert anticorrosive glaze layer is fused to the surface of the steel plate base material, and then the standardized enamel plate module is made. After the container is transported to the construction site, it is quickly installed with low consumption, and finally, the tank body is formed. Enamel assembly tank is an advanced tank production technology in the world, which has realized the breakthrough of materials, anti-corrosion technology, and installation mode compared with other materials (concrete tank and carbon steel welding tank). The bolted steel tank is not complex in structure and easy to ship to the construction site. The prime components of the kit are the glass-fused-to-steel panels, ready for bolting together, and complete with any special cut-outs for nozzles and/or manways or other appurtenances as required. The panels overlap and are bolted together and sealed with a high performance seal Our Glass Fused to Steel proprietary bolts are finless and are safe to use with glass fused to steel bolted tanks. All the bolt heads are plastic-capped to provide corrosion protection in the process environment. Mastic squeezes out between the panels and the bolt head seals the shank and protects it from contact with process fluids. Center Enamel is a well established, world-leading storage tanks manufacturer in China. Center Enamel provides the best storage tank solutions for storage tank projects for drinking water, Agricultural Water Tanks Dry Bulk Storage Tanks Potable Water Tanks Process Water Tanks wastewater, biogas storage, municipal sewage, firewater, grain storage, agricultural, oil, and other bulk liquids. Center Enamel has more than 30 years of industry experience and proud track record in the design and site erection of storage tanks and over the years has grown into a world-leading storage tanks manufacturer. Until 2018, Center Enamel storage tanks have been exported to more than 60 countries including the USA, Australia, Canada, Malaysia, Indonesia, Russia, UAE, Panama, India, and South Africa etc. The superior product quality and prompt service gain us worldwide recognition.
Center Enamel bolted steel grain storage silos are made of glass fused to steel panels, special sealant, and self-lock bolts, as known as glass fused to steel tanks ( GFS tanks ). The bolted steel grain storage silos volume and capacities can be customized from 20m3 to 20000m3, to meet the different requests from different customers. Combining the advantage of glass, Center Enamel bolted steel grain storage silos enjoy great anti-corrosion performance and more than 30 years of service life. Due to its unique benefits, bolted steel grain storage silos are the perfect grain storage solution for agriculture plants and popular in many countries.
Center Enamel Co., Ltd has been dedicated to the enamel industry for more than 30 years. As the most professional glass fused to steel bolted tanks manufacturer in Asia, Center Enamel has more than 200 patents of enamel frit formulas. The company owns a professional R&D Dep. with more than 60 people,set up a special laboratory, and possess independent enamel formula research ability.
The acid and alkali resistance bolted steel industrial water tanks also called glass fused to steel tanks, which combines the strength and flexibility of steel and the corrosion resistance of glass. Bolted steel industrial water tanks are assembled by Enamel sheet, Special sealant and Self-locking bolts. The enamel steel plate is coated with two layers of enamel on both sides and then burned with 900 high temperature, makes the enamel and steel plate bond together strongly. The strong bonding enamel coating not only can prevent the corrosion of industrial water tank, but also resistance to strong acid and strong alkali. Center Enamel's industrial water tanks engineering design meet or exceed AWWA D103-09 and EN/ISO28765:2011,and our industrial water tanks engineers make tank engineering calculation on each specific tank structure according to project local environmental conditions, such as snow load, wind speed, seismic zone, etc., to make sure the tank structure's adequate security in long-term service life.
The glass-lined steel wastewater treatment tanks distinguish with its good performance good corrosion resistance, with the corrosion-resistant silica glass coating on the steel panels. This is the only wastewater treatment tank finish where two materials are fused together to achieve the best of both:� the strength and flexibility of the steel combined with the corrosion resistance of the glass. The high-temperature fusion of glass to steel fired at 850 degrees results in an inert, durable finish. Center Enamel's Glass-Fused-to-Steel wastewater treatment tank has been proved internationally with service life over 30 years. Center Enamel Co., Ltd is not only the first� Glass-Fused-to-Steel Tanks� manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing, and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
The glass fused to steel wastewater treatment tanks distinguishes with its good performance â??good corrosion resistance, with the corrosion-resistant silica glass coating on the steel panels. This is the only wastewater treatment tank finish where two materials are fused together to achieve the best of both: the strength and flexibility of the steel combined with the corrosion resistance of the glass. The high-temperature fusion of glass to steel fired at 850-degree results in an inert, durable finish. Center Enamel's Glass-Fused-to-Steel wastewater treatment tank has been proved internationally with service life over 30 years. Center Enamel Co., Ltd is not only the first� Glass-Fused-to-Steel Tanks� manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
AWWA D103-09 complied glass fused to steel sludge holding tank is with superior corrosion resistance and fast in installation. Center Enamel glass fused to steel sludge holding tank is expendable and customized in color and capacity. The capacity we are capable of is minimum in 20 m3 and maximum in 20,000 m3 . Glass fused to steel sludge holding tank combines the strength and flexibility of steel and the corrosion resistance of glass. This is the combination of glass and steel to achieve the characteristics of both: superior corrosion resistance of glass, combined with flexibility and strength of steel. Center Enamel glass fused to steel sludge holding tank engineering design conform to or exceed AWWA D103-09, OSHA, and ISO/EN 28765 international standards and has more than 30 years of service life! Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
ISO9001-2000 GFS Agriculture Water Storage Tank is widely used for Farm Irrigation Agriculture water storage tank is made up of glass fused steel with special sealant & self-locking bolts, which are designed for optimum energy efficiency, durability, and long-lasting performance. The Glass Fused to Steel construction of these bolted tanks is exceptional for the storage of potable water, wastewater, petroleum, chemicals, and dry bulk and in such applications, power generation stations, standpipes, frac processing, fish ponds, sludge tanks, trickling filters, high temp fermentation plants. Center Enamel Co., Ltd is not only the first Glass-Fused-to-Steel Tanks manufacturer and supplier in China but also the most experienced Glass-Fused-to-Steel tanks manufacturer in all of Asia. Center Enamel Glass-Fused-to-Steel tanks engineering & design, product testing, and quality system are in strict accordance with AWWA D103-09, OSHA, ISO/EN 28765, NSF61 and NFPA, etc. international standards.
