Nominal diameter 6mm-300mm outside diameter 10.5mm-318.5mm. JIS G3459:1997
Type: elbow Size : 1/2"-48"(dn15-dn1200) Wall thickness Sch5-sch160 Standard : astm .Aisi Material a234-wpb Packaging wooden case or carton or wooden pallet or as per customers' requirement Applications petroleum chemical, power, gas, metallurgy, shipbuilding, construction, etc 1 m3 wooden case or pallet
01) Commodity: seamless austenitic stainless steel pipes 02) Process method: cold drawn/cold pilgered 03) Surface finish: annealed/cold pilgered/manual polished/mechanical polished 04) Material: TP304, TP304L, TP310/S, TP316L, TP316/316L dual grade, TP317L, TP321, TP347ú¼ S31803/S32205 05) Standards: ASTM A213-213Mú¼ASTM A312-312Mú¼ú¼Japan Standard JIS, and Germany Standard DIN 06) Size: a) NPS: 1/8" to 10" b) Schedule: 5/5S, 10/10S, 20/20S, 40/40S, 80/80S, 120/120S, 160/160S,acc. to ANSI B36.19/36.10 c) O.D.: 0.405" to 10" d) W.T.: 0.049" to 1.125" 07) Length: Max.18meters 08) Delivery conditions: annealed & pickled 09) Applications: for fluid and gas transport; structure and machining 10) packing: plastic bag for each piece then packed in seaworthy wooden cases 11) Min order quantity: 1 metric tons or upon negotiation 12) Delivery date: Min. 45 days
They consist of v-shape profile wire and the longitudinal support rods. Each intersecting point of these wires is fusion welded, so it has sturdy constriction and good mechanical property.The v-shape section plane can avoid blockage, and make sure of the unimpeded water. The consecutive slot have more open area, and it can reduce the speed of the water entering to aviod the sand entering the screen under the great pressure, so it can filter sand better.Meanwhile, the slot can change according to the real condition of the earth. If you are interested in our product, please contact us, and for more information.
The sand and gravel can not easily block the slot because of the special bridge design.It has great mechanical strength and water entering capacity.Meanwhile, it use steel punching technology and rolled in many ways, so it is light, cheap and easily operating.We us cnc to punch, so the slot can change as your requirements.In order to give customers more convenience, we can offer any diameter screens.We also offer galvanized ones to prolong the operational life.Meanwhile, the slot can change according to the real condition of the earth.If you are interested in our product, please contact us, and for more information.
Productid: straight/reducing jointing cross Execution standard: ansi b16.9, gb/t12459, gb/t13401, sh3408-96, sh3409-96 Product material: white, 304f=304lf=316lf=321f=310sf=310 Nominal diameter: diameter: 18-1220. Thickness:1.5mm-30mm.
1)Product: Stainless steel stub end, Butt Welding fitting 2) Size: Seamless 1/2"-24" (DN15-DN600), Welded 1/2"-48" (DN15-DN1200),MaxRange:
1)Product: Stainless steel eccentric reducer, Butt Welding fitting 2) Size: Seamless 1/2"-24" (DN15-DN600), Welded 1/2"-48" (DN15-DN1200),MaxRange:
`Item: Stainless Steel Pipe Standard: ASTM/JIS/DIN/BS/EN/GB Material: 304,304L,304H,310S,316,316L,316Ti,321,321H,347,347H Usage; Water transport/Boiler use/Chemical use/Construction use Size: 1/2"-56" Wall thickness: 4mm-140mm Kind: Seamless Packing: Hexagonal shaper bundled with strong steel strips.Plastic caps on both of the pipes.Other types of packing can be made according to the customersí» requirements. Surface: Black,red,blue,or according to customersí» requirements Trade terms: L/C or T/T Delivery Time; 10-100days,depending on Qty. Productivity; 2000 Tons per month Others Special designs are available. The larger quantity,the lower price. Hexagonal shaper bundled with strong steel strips.Plastic caps on both of the pipes.Other types of packing can be made according to the customers' requirements.
Outer diameter: 1/4-30"3 Wall thickness: sch5, sch10, sch20, sch40, sch80, sch160, schxx4 Standard: astm a106, astm a53, astm a179, api5l gr.B, x42, x46, x52, api 5ct k55 Application: mechanical tubing, oil casing, low pressure boiler etc. Painting black, cap, in bundle.
The company offers comprehensive range of superior quality dairy fittings in which finest materials used. We have carved out a niche for ourself as providers. We offer reasonable prices. This line consists of tri-clover parts with either tri-weld ends suitable for use with orbital welding equipment or self-aligning tri-clamp end connections. Material of contruction: 304, 304l, 316, 316l etc., Finish : mechanical polish as well as electropolish finishes. Types: seamless & welded Items: threaded bevel seat 90¦ elbow 90¦ reducing elbow, non tapered 90¦ elbow, plain bevel seat 90¦ elbow short outlet tee 45¦ elbow Equal tee Reducing tee Instrument tee Short outlet reducing tee Equal cross Long weld ferrule Short weld ferrule Ferrule for expanding (recessless) Automatic weld ferrule Light tank weld ferrule Light, medium & heavy duty adjustable tri-clamp Light, medium & heavy duty tri-clamp with t-bolt Single hinge heavy duty tri-clamp with wing nut Double hinge heavy duty tri-clamp with wing nut Rubber hose adapter Tygon hose adapter Threaded bevel seat adapter Sanitary hose clamp for tygon hose adapter Plain bevel seat adapter Male npt adapter Female npt adapter Accentric & concentric reducer Short outlet equal tee Instrument tee Tri-clamp x tri-weld equal tee Reducing tee Outlet reducing tee Short outlet reducing tee Equal cross Reducing cross End cap Flared nipple Lap joint stub end Pipe hanger Gaskets Sms , din unions etc., Size: 1/2" od to 4" od Thickness :18 swg to 14 swg As per requirement
We can produce various low-pressure, medium-pressure and high-pressure industrial pipe fittings that are made of carbon steel, alloy steel and stainless steel such as elbows, flanges, tees, pipe caps, large-size elbows, reducers and socket joints etc. Outside diameter: 13.7-610mm Wall thickness: sch40, sch80, sch160. Etc Length: 5.8m, 6m, 11.8m, 12m. Etc. Application: it is widely used in common structure, fluid conveyance, low and medium pressure boilers and so on. Packing: hexagonal bundles Shiping: ocean shipping.
Our corp. Was invested by kum kang corporation from korea.Base on the high technology from korea, we specialize in producing high quality butt-welding fittings and flanges such as 90 degrees elbows, 45 degrees elbows, straight tees, reudcing tees, concentric reducers, eccentric reducers, caps etc.To ansi, jis, ks, din, bs & en standards.Seamless fittings from 1/2" to 24" and welded fittings from 26" to 56".
Stainless steel pipe fittings . As clients'requirments.
Our products catalogueíOo Size 1/2¡íÑ¡íÑ~72¡íÑ¡íÑ Thickness SCH10~SCH160 / STD / SGP / XS / XXS Standard ASTM / JIS / DIN / BS / GB and so on Material Carbon steel (seam & seamless) ASTM A234 A105 WPB Packing Wooden cases, wooden pallets and as customers request Product catalogue Elbows, Tees, Concentric and Eccentric reducers, Pipe Caps, Bends, Flanges and Socket Elbow. Used in Chemical, petrochemical, gas, ship building, fire control industry and so on Factory Location Mengcun County, Cangzhou City, Hebei province, China. Certification ISO9001. Wooden cases, wooden pallets and as customers request.
Features: 1. Commodity: seamless stainless steel pipe/tube 2. Process method: cold drawn/cold rolled 3. Surface finish: anneal/pickling/manual polish/ mechanical polish 4. Material: tp304, tp304h, tp304l, tp310/s, tp316l, tp316/316l, tp316ti, tp317l, tp321/321h, tp410, s31803, s32750, 904l, 1.4301, 1.4306, 1.4401, 1.4404, 1.4541, 1.4571, 1.4438, 1.4539, 1.4845 and so on. 5. Standards: astm a312/213/269, astm a789/a790, astm b677, din17458, en10216 , etc. 6. Size: A) nps: 1/8" to 10" B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19/36.10 C) o. D.: 6 mm to 219 mm D) w. T.: 0.5 mm to 25 mm 7. Length: max. 20 meters 8. Delivery conditions: annealled, picklinged and polished 9. Packing: seaworthy wooden cases/steel framed cases/simple packaging 10. Certificate: iso 9001:2000, ped, tuv. Seaworthy wooden cases/steel framed cases/simple package.
Features: 1. Commodity: seamless stainless steel pipe/tube 2. Process method: cold drawn/cold rolled 3. Surface finish: anneal/pickling/manual polish/ mechanical polish 4. Material: tp304, tp304h, tp304l, tp310/s, tp316l, tp316/316l, tp316ti, tp317l, tp321/321h, tp410, s31803, s32750, 904l, 1.4301, 1.4306, 1.4401, 1.4404, 1.4541, 1.4571, 1.4438, 1.4539, 1.4845 and so on. 5. Standards: astm a312/213/269, astm a789/a790, astm b677, din17458, en10216 , etc. 6. Size: A) nps: 1/8" to 10" B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19/36.10 C) o. D.: 6 mm to 219 mm D) w. T.: 0.5 mm to 25 mm 7. Length: max. 20 meters 8. Delivery conditions: annealled, picklinged and polished 9. Packing: seaworthy wooden cases/steel framed cases/simple packaging 10. Certificate: iso 9001:2000, ped, tuv. Seaworthy wooden cases/steel framed cases/simple package.
Features: 1. Commodity: Seamless stainless steel pipes 2. Process method: Cold drawn/cold rolled 3. Surface finish: Anneal/pickling/manual polish/ mechanical polish 4. Material: TP304, TP304H, TP304L, TP310/S, TP316L, TP316/316L, TP316Ti, TP317L, TP321/321H, TP410, S31803, S32750, 904L, 1.4301, 1.4306, 1.4401, 1.4404, 1.4541, 1.4571, 1.4438, 1.4539, 1.4845 and so on. 5. Standards: ASTM A312/213/269, ASTM A789/A790, ASTM B677, DIN17458, EN10216 , etc. 6. Size: A) NPS: 1/8" to 10" B) Schedule: 5/5S, 10/10S, 20/20S, 40/40S, 80/80S, 120/120S, 160/160S, acc. To ANSI B36.19/36.10 C) O. D.: 6 mm to 219 mm D) W. T.: 0.5 mm to 25 mm 7. Length: Max. 20 meters 8. Delivery conditions: Annealled, Picklinged and Polished 9. packing: Seaworthy wooden cases/steel framed cases/simple packaging 10. Certificate: ISO 9001:2000, PED, TUV .
Our wide range of fittings include : Alloy steel fittings Carbon steel fittings Nickel alloy fittings Stainless steel fittings Range : 1/8"nb to 48"nb in sch: 5s, 10s, 40s, 80s, 10, 20, 40, std, 60, 80, xs, 100, 120, 140, 160, xxs available with nace mr 01-75 Type : seamless/welded/fabricated Long radius bend û lr bend Long radius bend, pig gable bend, induction bend with radius r=3d, 5d, 6d, 8d, 10d & 20d. Minimum wall thinning rate and ovality No wrinkles Form : Elbows in long & short radius in 45 deg, 90 deg, 180 deg. Equal, unequal tee & barred tee. Eccentric reducer & concentric reducer. Caps & crosses. Long & short stub end. Sewage nipple & barrel nipple.
We are the manufacture of pipe fitting and flanges in all shape , size and grade such as 304 , 316 , 304l , 316l and also in other grade as per your requirement. Standard lot size.
