1.Material: SS 304, SS 304L,SS 316,SS 316L 2.Wire Diameter: 0.12mm 3.Mesh:80 mesh per inch 4.Aperture size: 200 micron 5.Weight:0.58 kgs/m2 6.Standard Roll width: 36" (0.914m) or 39.4"(1.0m) 7.Standard Roll Length: 100' (30m)
1.Material: 316 stainless steel wire 2.Weave Type:Plain weave,twill weave,plain dutch weave,twill dutch weave,three heddle weave,five heddle weave. 3.Wire diameter:0.015mm-1mm 4.Mesh counts:3-635 mesh 5.Roll width: 3 feet,4 feet,5 feet up to 10 feet 6.Roll length:50 feet,100 feet up to 500 feet 7.Features: (1) wear resistance, high strength, long service life (2) high air permeability, good drainability, easy cleanability (3) high temperature resistance,corros ion resistance 8.Application: (1)widely used in aerospace, petroleum, chemical industry (2)scientific research and transportation industries (3)electroplating industry for pickling mesh, printing mesh (4)battery industry and a variety of sophisticated filtration products 9.Packing: 316 Stainless Steel Wire Mesh use moisture-proof packing and anti-extrusion packing. 316 Stainless Steel Wire Mesh is wound around flat and dry mandrel, inside with moisture-proof paper or other packaging and outside with wooden cases or wooden pallets.
1.Material: SS 201,SS 202, SS 304,SS 304L, SS 316,SS 316L,SS 321 2.Weave Type:Plain weave 3.Wire Diameter:0.04mm-1mm 4.Mesh counts:3-300 mesh 5.Roll width: 3 feet,4 feet,5 feet up to 10 feet 6.Roll length:50 feet,100 feet up to 500 feet 7.Features: (1) Square hole,warp wire and weft wire are of equal size. (2) Accurate in mesh size,high flow rate. (3) High efficient screeing,good stability,high opening rate,Low pressure loss. (4) flat surface,wear-resistant,good air permeability,firm in structure,easy to clean. 8.Application: (1)widely used in aerospace, petroleum, chemical industry (2)scientific research and transportation industries (3)electroplating industry for pickling mesh, printing mesh (4)battery industry and a variety of sophisticated filtration products 9.Packing: Plain weave stainless steel wire mesh use moisture-proof packing and anti-extrusion packing.Plain weave stianless steel wire mesh is wound around flat and dry mandrel,inside with moisture-proof paper or other packaging and outside with wooden cases or wooden pallets
1.Material: SS 201,SS 202, SS 304,SS 304L, SS 316,SS 316L,SS 321 2.Weave Type:Plain weave,twill weave,plain dutch weave,twill dutch weave,three heddle weave,five heddle weave. 3.Wire Diamter:0.015mm-1mm 4.Mesh counts:3-635 mesh 5.Aperture size :0.025-1mm 6.Roll width: 3 feet,4 feet,5 feet up to 10 feet 7.Roll length:50 feet,100 feet up to 500 feet 8.Features: (1) wear resistance, high strength, long service life (2) high air permeability, good drainability, easy cleanability (3) high temperature resistance,corrosion resistance 9.Application: (1)widely used in aerospace, petroleum, chemical industry (2)scientific research and transportation industries (3)electroplating industry for pickling mesh, printing mesh (4)battery industry and a variety of sophisticated filtration products 10.Packing: Stainless Steel Wire Mesh use moisture-proof packing and anti-extrusion packing.Stainless Steel Wire Mesh is wound around flat and dry mandrel,inside with moisture-proof paper or other packaging and outside with wooden cases or wooden pallets
Materials in ANSI316, ANSI304, 1.4308, 1.4408, 1.4581 Working Pressure: JIS 5 KG/CM2
Wuxi Yao Hao metal material Co. Ltd. the main stainless steel wire rope, rubber rope, plastic rope, plastic coated stainless steel wire rope, rope, wind cable wire rope, wire rope, rope and other stainless steel light. Wire rope material: SUS310S, 316L, 316, 310, 304, 304L, 303, 303CU, 302, 301, 321, 202, 201, and so on. Stainless steel wire rope specifications: 7 * 1, 6 * 12, 7 * 7, 7 * 19, 17 * 39, 6 * 19+1, 6 * 37+1, 6 * 61+1 etc.. Commonly used 6 strands of wire rope, each by 19, 37 and 61 steel wire composition. Traditionally, two numbers are used to represent the type of wire rope, and a "1" word is added behind it to indicate a core in the middle to increase its softness. [non-standard can be customized according to customer requirements] Appearance quality: the appearance of wire rope, whether or not galvanized, should be required to be smooth, without breaking, twisting evenly, end is not loose, etc., the surface of a single wire shall not be sunken, rust, flattening, bruising and other defects. For smooth steel wire, to protect against corrosion and rust, the surface should be oiled. Features: stainless steel wire rope A. high size precision can reach + 0.01mm; B. with excellent surface quality, good brightness; C. has excellent corrosion resistance, high tensile strength and fatigue strength; D. chemical stability, pure steel, low inclusion content; E. has many characteristics of high temperature resistance and long service life, durable etc., (1) stainless steel wire rope definition: with the prepared steel wire, in the machine, according to the provisions of a number of twist made of single rope, and then with 6 or 8 such shares, with fiber core, again synthesis of rope called wire rope. (2) kinds and uses: the classification methods of wire ropes are more, and the law of classification in different countries is different. There are many kinds of wire ropes, such as wire rope structure, twist direction, surface, application and intensity. The variety of the variety reflects the variety of the use. The twist: right twist (Z), Zuo Nian (S), interactive, interactive right twist (SZ) (ZS), with a left twist right twist (ZZ), left the same twist (SS). According to surface: there are two kinds of smooth and galvanized. Divided by intensity: that is, according to the nominal strength of the monofilament, the wire rope is divided into several grades. Pay attention to the following when using pulley steel rope: (1) when the wire rope passes through the pulley block, the diameter of the pulley should be 1~1.25 times larger than the diameter of the rope;
Our industry is concerned in the production and supply of Stainless Steel Hardware products. We are manufacture according to consumers demand and are quality completed by stainless steel. Furnished with a pair of ball turning flat button hinges additionally these have enough threshold capacity. In an addendum to this, these are largely utilized beyond the industry and by our customers.
Product Details Product Name:stainless steel coil East Asia Stainless Steel Coil Brand Name East Asia Standard ASTM A240, ASTM A480, EN10088, JIS G4305 Material 304, 316L, 321, 310S, 1.4301, 1.4307, 1.4404, S31803, S32750, 904L, Monel 400, Inconel 800 Surface NO.1,2B,NO.4,BA,SB,Satin,Brushed,Hairline,Mirror Payment Term T/T,L/C,Western Union Packing In Wooden Cases,In Wooden Pallets Shipment
Wuxi Hao Yiu metal main stainless steel plate: stainless steel bar, stainless steel sheet, stainless, stainless steel skid plate, stainless steel plating, stainless steel decorative plate, stainless plate, stainless steel plates, stainless steel grinding plates, stainless steel wire, stainless steel diamond plate, stainless steel etched plates, 2B, BA and industrial plate. Stainless steel plate: SUS310S, 201, 202, 301, 304, 304L, 309S, 310, 316, 316L, 904L, 902L, 310, 321. Specification of stainless steel plates: flat: thickness 0.3mm~160mm Surface: 1000mm*2000mm, and 1219mm*2438mm, and 1219mm*3050mm, and 1500mm*3000mm, and 1500mm*6000mm, and 1800mm*6000mm (open cut) Sheet: thickness 0.3mm~10MM width: 1000mm, 1219mm, 1500mm, 1800mm (open cut) "non-standard can be customized according to customer requirements My company has been adhering to the "quality of survival, to the integrity and development" business philosophy, the highest quality-best prices, back to old and new customers. Company products are widely used in home appliances, kitchen equipment, food, medical devices, metal hose, shipping, computer accessories, cell phone parts, machinery manufacturing, automotive parts and construction, industry and other fields. Company based on customer-oriented, customer first, honest, thought of this, take the quality as the life, pay attention to after-sale tracking service, mutual benefit, common development is our service. Your phone, fax us a bridge, your needs, that is my responsibility, look forward to serving you, create brilliance! if you want more information, please contact our company.
Wuxi hao yiu metal main stainless steel rods: stainless steel round bar, stainless steel hexagonal bar, stainless steel bar, stainless steel ground rods, stainless steel bar, stainless steel half rods, stainless steel oval bar, flat bar, angle iron, iron and so on. Stainless steel rod material: sus316, 316l, 316f, 301, 302, 303, 303f, 303cu, 304, 304l, 304f, 309s, 310s, 310, 310s, 321, sus630, sus631420f, 430f, 416f, 1214, 1215, 45#, 1045, a3. Stainless steel rod specifications: rod: ð¤0.7-ð¤300 hexagonal rods: h2-s55mm bar: 2*2-75*75mm. "non-standard can be customized according to customer requirements" Stainless steel surface requirements:: polishing, grinding, black rod, wire, knurled, pulling the flowers, the company is good, no trachoma, crack-free, uniform hardness, good machinability, corrosion protection performance. My company has been adhering to the "quality of survival, to the integrity and development" business philosophy, the highest quality-best prices, back to old and new customers. Company products are widely used in home appliances, kitchen equipment, food, medical devices, metal hose, shipping, computer accessories, cell phone parts, machinery manufacturing, automotive parts and construction, industry and other fields. Company based on customer-oriented, customer first, honest, thought of this, take the quality as the life, pay attention to after-sale tracking service, mutual benefit, common development is our service. Your phone, fax us a bridge, your needs, that is my responsibility, look forward to serving you, create brilliance! if you want more information, please contact our company.
Wuxi yao hao metal material co. Ltd. The main stainless steel wire: wire, wire, spring wire, screw line, cord, piano wire, fine line, light line, car axis, hard line, line, electrolytic hydrogen back line, carbon steel wire, galvanized wire, annealed wire, square wire, flat wire, half round wire, brass wire, aluminum wire, nickel wire. The hardness of the line has several kinds: all soft, 1/4 hard, semi hard, 3/4 hard, full hard and ultrahard. Stainless steel wire material: 201, 202, 301, 302, 302hq, 304, 304l, 304h, 310, 310s, 316, 316l, 410, 430 and so on. Line diameter: 0.025-14. Can be adjusted straight cut. Straight wall thickness 0.05, length 10mm Stainless steel wire rod has unique features: 1., complete product specifications, material diversity 2. Surface quality, good brightness 3., high dimensional accuracy, up to + 0.01mm 4., strong corrosion resistance, tensile strength and high fatigue resistance 5. Packing well, the price is favorable 6. Non standard can be customized according to customer requirements My company's 10 machines, processing (flat line, square line, semicircle line) straightening, cutting. Acting import wire: stainless steel wire (br, s-co, ni-co), qin steel wire (swp-a/b/g), high carbon steel wire (swc70/80/67b) and nickel plated high carbon steel wire (ni-swc), japan fine wire, nickel plated steel wire, stainless steel wire, nickel plated carbon steel wire. The company's domestic steel wire specifications 0.1-10.0 into harmonica wire specifications: 0.1-7.0 domestic stainless steel wire specifications: 0.03-13.0 imported stainless steel wire specifications 0.05-8.0
Thickness: 0.02mm-4mm, width: 3.5mm-1550mm, can be customized by non standard! With the domestic stainless steel (imported) stainless steel strip: stainless steel tape, stainless steel strip, stainless steel stamping, precision stainless steel belt, stainless steel belt, stainless steel mirror cold rolled, hot rolled stainless steel, stainless steel, stainless steel belt, stretching with etched polished stainless steel belt, stainless steel belt, stainless steel belt, hard soft hard belt, stainless steel in high temperature resistant stainless steel belt. Cold rolling strip Take 1. "stainless steel belt / coil" as raw material and rolled into cold rolling mill at room temperature. The conventional thickness ranged from and the width was from ; 2. [cold rolled steel strip / coil] has the advantages of smooth surface and smooth surface, high dimensional accuracy and good mechanical properties. The products are mostly rolled and can be processed into coated steel sheets; 3.The production process of cold rolled stainless steel strip / roll: 1, pickling, rolling, lubrication, and process at room temperature. The formation and the annealing, cutting, packaging, but the arrival of the hands of customers. Hot Rolled 1.A strip of steel with thickness 1.80mm-6.00mm and width 50mm-1200mm is made by hot rolling mill. 2.[hot rolled strip / sheet] has the advantages of low hardness, easy processing, good ductility and so on. 3.The production process of hot-rolled stainless steel strip / roll: 1. The high temperature lubricating rolling, pickling, annealing, 3, 4, smooth process, the precision cutting and packaging, but the arrival of the hands of customers. Difference between hot and cold 1.The strength and yield ratio of cold rolled steel strip are good, and the ductility and toughness of hot rolled strip are good. 2.The surface quality, appearance and size accuracy of cold rolled steel strip are superior to those of hot rolled plate. 3.The thickness of cold-rolled steel strip is super thin, and the thickness of hot rolling is larger.
Wuxi Hao Yiu metal main stainless steel rods: stainless steel round bar, stainless steel hexagonal bar, stainless steel bar, stainless steel ground rods, stainless steel bar, stainless steel half rods, stainless steel oval bar, flat bar, angle iron, iron and so on. Stainless steel rod material: SUS316, 316L, 316F, 301, 302, 303, 303F, 303Cu, 304, 304L, 304F, 309S, 310S, 310, 310S, 321, SUS630, SUS631420F, 430F, 416F, 1214, 1215, 45#, 1045, A3. Stainless steel rod specifications: Rod: Ф0.7-Ф300 hexagonal rods: H2-S55mm bar: 2*2-75*75mm. "Non-standard can be customized according to customer requirements" Stainless steel surface requirements:: polishing, grinding, black rod, wire, knurled, pulling the flowers, the company is good, no trachoma, crack-free, uniform hardness, good machinability, corrosion protection performance. My company has been adhering to the "quality of survival, to the integrity and development" business philosophy, the highest quality-best prices, back to old and new customers. Company products are widely used in home appliances, kitchen equipment, food, medical devices, metal hose, shipping, computer accessories, cell phone parts, machinery manufacturing, automotive parts and construction, industry and other fields. Company based on customer-oriented, customer first, honest, thought of this, take the quality as the life, pay attention to after-sale tracking service, mutual benefit, common development is our service. Your phone, fax us a bridge, your needs, that is my responsibility, look forward to serving you, create brilliance! if
Features: stainless steel wire rope A. high size precision can reach + 0.01mm; B. with excellent surface quality, good brightness; C. has excellent corrosion resistance, high tensile strength and fatigue strength; D. chemical stability, pure steel, low inclusion content; E. has many characteristics of high temperature resistance and long service life, durable etc., (1) stainless steel wire rope definition: with the prepared steel wire, in the machine, according to the provisions of a number of twist made of single rope, and then with 6 or 8 such shares, with fiber core, again synthesis of rope called wire rope. (2) kinds and uses: the classification methods of wire ropes are more, and the law of classification in different countries is different. There are many kinds of wire ropes, such as wire rope structure, twist direction, surface, application and intensity. The variety of the variety reflects the variety of the use. The twist: right twist (Z), Zuo Nian (S), interactive, interactive right twist (SZ) (ZS), with a left twist right twist (ZZ), left the same twist (SS). According to surface: there are two kinds of smooth and galvanized. Divided by intensity: that is, according to the nominal strength of the monofilament, the wire rope is divided into several grades. Pay attention to the following when using pulley steel rope: (1) when the wire rope passes through the pulley block, the diameter of the pulley should be 1~1.25 times larger than the diameter of the rope; (2) lubrication shall be added to the wire rope periodically to reduce wear and tear; (3) the use of wire rope should be checked and approved in advance. Stainless steel wire rope characteristics: 1., high dimensional accuracy, up to + 0.01mm; 2. surface quality, good brightness; 3., strong corrosion resistance, tensile strength and high fatigue resistance; 4.. Stable chemical composition, pure steel, low inclusion content, good packing and favorable price;
Wuxi hao yiu metal main stainless steel rods: stainless steel round bar, stainless steel hexagonal bar, stainless steel bar, stainless steel ground rods, stainless steel bar, stainless steel half rods, stainless steel oval bar, flat bar, angle iron, iron and so on. Stainless steel rod material: sus316, 316l, 316f, 301, 302, 303, 303f, 303cu, 304, 304l, 304f, 309s, 310s, 310, 310s, 321, sus630, sus631420f, 430f, 416f, 1214, 1215, 45#, 1045, a3. Stainless steel rod specifications: rod: ð¤0.7-ð¤300 hexagonal rods: h2-s55mm bar: 2*2-75*75mm. "non-standard can be customized according to customer requirements" Stainless steel surface requirements:: polishing, grinding, black rod, wire, knurled, pulling the flowers, the company is good, no trachoma, crack-free, uniform hardness, good machinability, corrosion protection performance. My company has been adhering to the "quality of survival, to the integrity and development" business philosophy, the highest quality-best prices, back to old and new customers. Company products are widely used in home appliances, kitchen equipment, food, medical devices, metal hose, shipping, computer accessories, cell phone parts, machinery manufacturing, automotive parts and construction, industry and other fields. Company based on customer-oriented, customer first, honest, thought of this, take the quality as the life, pay attention to after-sale tracking service, mutual benefit, common development is our service. Your phone, fax us a bridge, your needs, that is my responsibility, look forward to serving you, create brilliance! if you want more information, please contact our company.
Wuxi yao hao metal material co. Ltd. The main stainless steel wire: wire, wire, spring wire, screw line, cord, piano wire, fine line, light line, car axis, hard line, line, electrolytic hydrogen back line, carbon steel wire, galvanized wire, annealed wire, square wire, flat wire, half round wire, brass wire, aluminum wire, nickel wire. The hardness of the line has several kinds: all soft, 1/4 hard, semi hard, 3/4 hard, full hard and ultrahard. Stainless steel wire material: 201, 202, 301, 302, 302hq, 304, 304l, 304h, 310, 310s, 316, 316l, 410, 430 and so on. Line diameter: 0.025-14. Can be adjusted straight cut. Straight wall thickness 0.05, length 10mm Stainless steel wire rod has unique features: 1., complete product specifications, material diversity 2. Surface quality, good brightness 3., high dimensional accuracy, up to + 0.01mm 4., strong corrosion resistance, tensile strength and high fatigue resistance 5. Packing well, the price is favorable 6. Non standard can be customized according to customer requirements My company's 10 machines, processing (flat line, square line, semicircle line) straightening, cutting. Acting import wire: stainless steel wire (br, s-co, ni-co), qin steel wire (swp-a/b/g), high carbon steel wire (swc70/80/67b) and nickel plated high carbon steel wire (ni-swc), japan fine wire, nickel plated steel wire, stainless steel wire, nickel plated carbon steel wire. The company's domestic steel wire specifications 0.1-10.0 into harmonica wire specifications: 0.1-7.0 domestic stainless steel wire specifications: 0.03-13.0 imported stainless steel wire specifications 0.05-8.0
Wuxi yao hao metal material co. Ltd. The main stainless steel wire rope, rubber rope, plastic rope, plastic coated stainless steel wire rope, rope, wind cable wire rope, wire rope, rope and other stainless steel light. Wire rope material: sus310s, 316l, 316, 310, 304, 304l, 303, 303cu, 302, 301, 321, 202, 201, and so on. Stainless steel wire specifications:.. Commonly used 6 strands of wire rope, each by 19, 37 and 61 steel wire composition. Traditionally, two numbers are used to represent the type of wire rope, and a "1" word is added behind it to indicate a core in the middle to increase its softness. [non-standard can be customized according to customer requirements] Appearance quality: the appearance of wire, whether or not galvanized, should be required to be smooth, without breaking, twisting evenly, end is not loose, etc., the surface of a single wire shall not be sunken, rust, flattening, bruising and other defects. For smooth steel wire, to protect against corrosion and rust, the surface should be oiled. Features: stainless steel wirea. High size precision can reach + 0.01mm; b. With excellent surface quality, good brightness; c. Has excellent corrosion resistance, high tensile strength and fatigue strength; d. Chemical stability, pure steel, low inclusion content; e. Has many characteristics of high temperature resistance and long service life, durable etc., (1) stainless steel wire rope definition: with the prepared steel wire, in the machine, according to the provisions of a number of twist made of single rope, and then with 6 or 8 such shares, with fiber core, again synthesis of rope called wire rope.
800psi/pn40 Size:1/4''--3'' Investment casting Ped 97/23/ec approved Casting approved ad2000-wo
1000psi/pn63 Reduce port Size:1/4''--1'' Investment casting Blow-out proof stem Sanitary design Ped 97/23/ec approved Casting approved ad2000-wo
200PSI/PN16 Size:1/2''--3'' Investment Casting PED 97/23/EC Approved Casting Approved AD2000-WO
