Classification : Inconel Alloy Inconel Bar It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.
Classification : Inconel Alloy Inconel Sheet It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.
Classification : Incoloy Alloy Incoloy Sheet is a nickel-iron-chromium alloy with molybdenum and copper added.Incoloy Sheet has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking and to pitting and crevice corrosion. Incoloy Sheet is Especially resistant to sulfuric and phosphoric acids.
Classification : Incoloy Alloy Incoloy Coil is a nickel-iron-chromium alloy with molybdenum and copper added.Incoloy Coil has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking and to pitting and crevice corrosion. Incoloy Coil is Especially resistant to sulfuric and phosphoric acids.
Classification : Incoloy Alloy Incoloy Bar is a nickel-iron-chromium alloy with molybdenum and copper Incoloy Bar Sheet has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking and to pitting and crevice copper Incoloy Bar is Especially resistant to sulfuric and phosphoric acids.
Product information Stainless Steel 310,310S Sheets can be welded using most of the resistance and fusion methods.Stainless Steel 310,310S Plates also possesses good low temperature toughness and is non-magnetic in the annealed condition. In addition to its heat resistance properties, Stainless Steel 310,310S also enjoys better resistance against creep and stress rupture corrosions. Stainless Steel 310,310S Sheets is used in Oil Refineries, Fluid catalytic cracking units, Hanger rods, and more. Like most other austenitic alloys, Stainless Steel 310,310S Plates work hardens and may require annealing after severe forming. Niobium in Stainless Steel 321H Coils has been added to suppress grain boundary Chromium Carbide precipitation. Grade Stainless Steel 310,310S Standard ASTM A240 / ASME SA240 Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc Thickness 4 mm To 100 mm Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc Form Sheets, Plates, Coils, Slatting Coils, Perforated Coils Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Stainless steel 430,430F is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. Stainless steel 430,430F has good creep strength and can work continuously under high temperature. The working temperature of Stainless steel 430,430F is 1200 , and it can work continuously at 1100 . It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts. Product name Stainless steel 430,430F Grade 430,430F Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Grade C N Mn P S Ni Cr Mo 430,430F 0.05 - - - - 20 25 - Products Display Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance. DX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc. Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries. Product name: DX51D Galvanized Strip Place of Origin: China Type: Steel Strip Standard: AISI, ASTM, BS, DIN, GB, JIS ETC. Certificate: ISO9001 Grade: SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness: 0.11-5.0mm Surface structure: anti-finger print /skin pass/oiled/ dry/chromated Size: Customized according to customer needs Tolerance: �±1% Processing Service: Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing: by actual weight Delivery Time: 7-15 days Technique: Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details in bundles, in bulk, customized packing.
Galvanized coil is a surface galvanized sheet with yield strength of 235MPa. Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500�?�°C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability. Galvanized Coils Manufacturer JIS DIN high-quality electro-galvanized steel coil Product name: Galvanized coil Place of Origin: China Type: Steel Coil Standard: AISI, ASTM, BS, DIN, GB, JIS Certificate: ISO9001 Grade: SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness: 0.1-5.0mm Surface structure: anti-finger print /skin pass/oiled/ dry/chromated Size: Customized according to customer needs Tolerance: �±1% Processing Service: Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing: by actual weight Delivery Time: 7-15 days Technique: Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details in bundles, in bulk, customized packing
DX52D galvanized coil is a surface galvanized sheet with yield strength of 235MPa. Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability. DX52D Galvanized coil Manufacturer JIS DIN high-quality electro-galvanized steel coil Product name: DX52D Galvanized coil Place of Origin: China Type: Steel Coil Standard: AISI, ASTM, BS, DIN, GB, JIS Certificate: ISO9001 Grade: SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness: 0.1-5.0mm Surface structure: anti-finger print /skin pass/oiled/ dry/chromated Size: Customized according to customer needs Tolerance: +1% Processing Service: Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing: by actual weight Delivery Time: 7-15 days Technique: Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details in bundles, in bulk, customized packing.
DC01 galvanized coil is a surface galvanized sheet with yield strength of 235MPa. Galvanized coil, a thin steel sheet that is dipped into a molten zinc bath to adhere a layer of zinc to its surface. It is mainly produced by the continuous galvanizing process, in which rolls of steel sheet are continuously dipped into a bath of molten zinc to make galvanized steel sheet; alloyed galvanized steel sheet. This steel sheet is also manufactured by the hot dipping method, but immediately after leaving the bath, it is heated to about 500C to produce an alloyed coating of zinc and iron. This type of galvanized coil has good paint adhesion and weldability. DC01 Galvanized coil Manufacturer JIS DIN high-quality electro-galvanized steel coil Product name: DC01 Galvanized coil Place of Origin: China Type: Steel Coil Standard: AISI, ASTM, BS, DIN, GB, JIS Certificate: ISO9001 Grade: SPCC,SPCD,SPCE/DC01.DC02.DC03/ST12,Q195 .Etc Thickness: 0.1-5.0mm Surface structure: anti-finger print /skin pass/oiled/ dry/chromated Size: Customized according to customer needs Tolerance: ±1% Processing Service: Bending, Welding, Decoiling, Cutting, Punching, Welding Invoicing: by actual weight Delivery Time: 7-15 days Technique: Hot Rolled Based, Cold Rolled Port: Tianjin Qingdao or according to your requirement Packaging Details in bundles, in bulk, customized packing
Classification : Monel Alloy 1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2.According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.
Classification : Monel Alloy 1.According to the preparation process can be divided into deformation superalloys, casting superalloys and powder metallurgy superalloys. 2. According to the strengthening mode, there are solid solution strengthening type, precipitation strengthening type, oxide dispersion strengthening type and fiber strengthening type, etc.
Q235 Galvanized Round Steel is a surface galvanized sheet with yield strength of 235MPa. Galvanized round steel is a geometric object made of iron or materials with certain strength and toughness by rolling, extruding, casting, hot galvanizing anti-corrosion profile surface and other processes. Hot dip galvanized round steel is produced by advanced galvanizing process, and its surface is glossy and durable. Galvanized round steel products have been used in many fields. The advantage of hot-dip galvanized round steel is that it has a long anti-corrosion life and has been a popular anti-corrosion treatment method to adapt to a wide range of environments. It is widely used in electric power tower, communication tower, railway, highway protection, street light pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Product name Q235 Galvanized Round Steel Diameter 16-250mm or Customized Length Customized Advantages Dia< 10.00 mm, cold drawn, on request also ground; ISO h8 Dia > 10.00 mm, cold drawn, on request also ground; ISO h9 Tighter tolerances on request Out of roundness standard: �½ of diameter tolerance Finish Line Straightening machines Milling and chamfering devices Surface control (Circograph, Circoflux) Ultrasonic control device Antimixing control - spectrotest devices Packaging, marking Standard AiSi, ASTM, BS, GB, JIS, EN,AS ETC. Surface Treatment Galvanized Mechanical Property Delivery status: Tensile strength (Rm): 570 -820 MPa, size depending Bar Processing Heat treatment: soft annealing, normalising, isothermal, spheroidising and stress relieving treatments, quenching and tempering Peeling Application * Automatic lathe processing, metal stamping parts processing; * Electronic industry, optical fiber connector, optical disc drive, scanner, medical equipment; * Household appliances, instrumentation industry; * Office equipment (computers, photocopiers, cameras, fax machines, etc.); * Watch components, glasses; * Electronic terminal pin, timer, carburetor; * Decorations, light ornaments, cars, motorcycles, chains; * Clean car sweepers and toys; * Pens, handbag accessories, belt buckles, fishing gear, etc .; * Studs, screws, nuts, pipe joints, spring seats, etc
* Galvanized round steel is a geometric object made of iron or materials with certain strength and toughness by rolling, extruding, casting, hot galvanizing anti-corrosion profile surface and other processes. Hot dip galvanized round steel is produced by advanced galvanizing process, and its surface is glossy and durable. Galvanized round steel products have been used in many fields. The advantage of hot-dip galvanized round steel is that it has a long anti-corrosion life and has been a popular anti-corrosion treatment method to adapt to a wide range of environments. It is widely used in electric power tower, communication tower, railway, highway protection, street light pole, marine components, building steel structure components, substation ancillary facilities, light industry, etc. Product name : Galvanized Steel Round Bar Diameter : 16-250mm or Customized Length : Customized Advantages : Dia< 10.00 mm, cold drawn, on request also ground; ISO h8 Dia > 10.00 mm, cold drawn, on request also ground; ISO h9 Tighter tolerances on request Out of roundness standard: half of diameter tolerance Finish Line Straightening machines Milling and chamfering devices Surface control (Circograph, Circoflux) Ultrasonic control device Antimixing control - spectrotest devices Packaging, marking Standard : AiSi, ASTM, BS, GB, JIS, EN,AS ETC. Surface Treatment : Galvanized Mechanical Property : Delivery status: Tensile strength (Rm): 570 -820 MPa, size depending Bar Processing : Heat treatment: soft annealing, normalising, isothermal, spheroidising and stress relieving treatments, quenching and tempering Peeling Application * Automatic lathe processing, metal stamping parts processing; * Electronic industry, optical fiber connector, optical disc drive, scanner, medical equipment; * Household appliances, instrumentation industry; * Office equipment (computers, photocopiers, cameras, fax machines, etc.); * Watch components, glasses; * Electronic terminal pin, timer, carburetor; * Decorations, light ornaments, cars, motorcycles, chains; * Clean car sweepers and toys; * Pens, handbag accessories, belt buckles, fishing gear, etc .; * Studs, screws, nuts, pipe joints, spring seats, etc.
Classification : Hastelloy Alloy Hastelloy Alloy Sheet is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Sheet is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Hastelloy Alloy Hastelloy Alloy Sheet is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Sheet is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Hastelloy Alloy Hastelloy Alloy Coil is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media.Hastelloy Alloy Coil is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
Classification : Hastelloy Alloy Hastelloy Bar is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungst en content give good resistance to reducing media. Hastelloy Bar is particularly useful for resistance to pitting and crevice corrosion in acid-halide environments.
* SGCH steel (1.0330 material) is a cold formed European standard cold rolled high-quality low-carbon steel plate. In BS and DIN EN 10130 standards, it includes five other steel types: DC03 (1.0347), DC04 (1.0338), DC05 (1.0312), DC06 (1.0873) and DC07 (1.0898). The surface quality is divided into two types: DC01-A and DC01-B. DC01-A: Defects that do not affect the formability or surface coating are allowed, such as air holes, slight dents, small marks, slight scratches and slight coloring. DC01-B: The better surface shall be free of defects that may affect the uniform appearance of high-quality paint or electrolytic coating. The other surface shall meet at least surface quality A. The main application fields of DC01 materials include: automobile industry, construction industry, electronic equipment and household appliances industry, decorative purposes, canned food, etc. Commodity : SGCH Carbon steel coil Standard: DIN GB JIS BA AISI ASTM EN GOST ETC. Mechnical : Commercial / Drawing / Deep Drawing /Extra Deep Drawing/Structural quality Surface treatment : Chromated and oiled, and ant-ifinger Hardness : Softy, half hard ,hard quality Grade : DC01 ST14,ST15,ST16,DC01,DC03,DC04,DC05,DC06,etc. Thickness : 0.12-12.0mm Width : 600-1500mm Coil weight : 3-34MT/Coil or as your request MOQ : 3-5 MT Packaging : Export standard, seaworthy ID: 508mm or 610mm Trade Term : FOB, CFR, CIF, EXW ETC. Transport Type : Container, bulk and train
