Features 1.Alloy tool steel which offers good machineability. 2. Excellent polished finish for large section. 3.Supplied in the hardened and tempered condition ready for machining. 4. In this condition it gives excellent wear resistance. Applications 1. Ideally suited for the production of plastic moulds. 2.Die holders, zinc die casting dies, backers, bolsters and injection moulds. 3. Shafts, rails and wear strips. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Hot work tool steel. 2.Very good red-hardness with toughnes. 3.Tools may be water-cooled in service. 4.May be cold-hobbed in the annealed condition. Applications 1.Casting dies for aluminium, magnesium and zinc. 2.Extrusion dies and adaptor ring. 3.Hot stamping and press forge dies. 4.Shear blades for hot work and hot swaging dies. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Specification 1.Medium carton structual steel. 2.High strength and machinability. 3.Good toughness. 4.Typically used in quenched and tempered or normalized conditions. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Alloy tool steel which offers good machineability. 2.Excellent polished finish for large section. 3.Supplied in the hardened and tempered condition ready for machining. 4. In this condition it gives excellent wear resistance. Applications 1. Ideally suited for the production of plastic moulds. 2.Die holders, zinc die casting dies, backers, bolsters and injection moulds. 3.Shafts, rails and wear strips. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Specification 1. Alloy tool steel which offers good machineability 2. Excellent polished finish 3. Supplied in the hardened and tempered condition ready for machining 4. In this condition it gives excellent wear resistance. Application 1. Ideally suited for the production of plastic moulds 2. Die holders, zinc die casting dies, backers, bolsters and injection moulds 3. Shafts, rails and wear strips. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Specification 1.Hot work tool steel. 2.Better toughness than conventional H13. 3.Fine grain size with high toughness. 4.High strength at elevated temperature. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Specification 1. One of the most often used chromium-molybdenum tool steels. 2. Contains a higher molybdenum content. 3. Better hot hardness and temper resistance. 4. High hot hardness and toughness. 5. Good resistance to softening, wear and thermal fatigue. Application 1. Applications such as gears. 2. Shear blades. 3. Mandrels punches and tooling dies. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
1.Size of D3 alloy steel Diameter(mm):20~600 Length (mm):1000~6000 Plate Thickness(mm):Max:800 Width (mm):Max:2200 Length (mm):Max:6000 The specification can be customized. 2.Chemical Compositions C:2.00-2.30 Si:Max0.40 Mn:Max0.40 P:Max0.030 S:Max0.030 Cr:11.50-13.00 3.Similar Grade GB:Cr12 AISI:D3 DIN:1.2080 JIS:X210Cr12 4.Features of D3 steel (1)High carbon high chromium. (2)High wear and abrasion resistance. (3)High resistance to heavy pressure. (4)Immune from sinking in use. (5)Good machinability and inoxidizability. 5.Application For draw dies,shear blades,powder metal tooling. 6.Min.Order Quantity:5 Ton/Tons Our MOQ is flexible Supply Capacity:5000 Ton/Tons per Month or based on the clients' demand Port:Shenzhen Payment Terms:L/C,D/P,T/T 7.Packaging & Delivery In seaworthy packing or based on your order Shipped in 15 days after payment 8.Special Use:Mold Steel 9.Surface treatment:black/polished/machined Technology:hot rolled/forged/cold drawn Heat treatment:annealing/Q+T
Specification 1.Chromium molybdenum alloy steel. 2.Slightly higher carbon content than 4130. 3.Greater strength and heat treatment. 4.Good processability and easy polishing. 5.Good toughness and small quenching deformation. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Similar to M2 high speed steel. 2.Added cocalt to increase hot hardness. 3.Offers excellent cutting performance. Applications 1.Cutting tool. 2.Cold forging die. 3.Wear resistance screws 4.Cold forming tools. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Specification 1.Chromium molybdenum alloy steel. 2.Slightly higher carbon content than 4130. 3.Greater strength and heat treatment. 4.Good processability and easy polishing. 5.Good toughness and small quenching deformation. Application 1.Connection rods,conveyor pins. 2.Gears,stem assemblies. 3.Pump shafts and tool holders. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Specification 1.Oil hardening tool steel supplied in the annealed condition. 2.Good durability and excellent wear resistance. 3.Holds a good cutting edg. 4.Excellent general purpose tool steel. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Good machineability alloy tool steel. 2.Excellent polished finish for large section. 3.Supplied in the hardened and tempered condition ready for machining. 4.Can be case hardened or nitrided. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Chromium molybdenum alloy steel. 2. High strength and toughness. 3.Good stability of hardenability and anti-overheating. 4.Good high tensile strength with shock resistance. Applications 1.Heavy machinery and high-load of shaft. 2. Rotor shaft and blades. 3.Special performance requirements of the vital parts after nitriding treatment. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Good machineability alloy tool steel. 2.Excellent polished finish for large section. 3.Supplied in the hardened and tempered condition ready for machining. 4.Can be case hardened or nitrided. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Specification 1.Hot work alloy tool steel. 2.Supplied in the annealed or quenched condition. 3.High temperature impact toughness and thermal fatigue strength. 4.High resistant to tempering,medium wear resistance. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Specification 1.General purpose of tungsten molybdenum high speed steel. 2.High toughness combined with good cutting power. 3.Will withstand increased in temperature. Application 1.Cutting tool . 2.Cold forging die. 3.Wear resistance screws. 4.Cold forming tools. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Hot work tool steel. 2.Very good red-hardness with toughness. 3.Tools may be water-cooled in service. 4.May be cold-hobbed in the annealed condition. Applications 1.Casting dies for aluminium, magnesium and zinc. 2.Extrusion dies and adaptor ring. 3.Hot stamping and press forge dies. 4.Shear blades for hot work and hot swaging dies. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Low carbon steel. 2.Good strength coupled with formability. 3.Easy to machine and fabricate. 4.Can be galvanized to increased corrosion resistance. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
Features 1.Similar to M2 high speed steel. 2.Add cobalt to increase hot hardness. 3.Offers excellent cutting performance. Shape:steel plate/flat bar/round bar Technology:Hot work / Forged/cold drawn Heat treatment:Annealed / Q+T Surface condition:Black/Peeling/Polishing/Machined Delivery condition:Hot rolled or forged, Peeled or black surface Test:UT 100% / SGS Certification:ISO/mill certificate
