H13/1.2344 Chromium Hot-work Steel is widely used in hot and cold work tooling applications. Due to its excellent combination of high toughness and fatigue resistance, H13 is used more than any other tool steel in tooling applications such as die casting dies for zinc, white metal, aluminum and magnesium. It is also widely used for extrusion dies, trimmer dies, gripper dies, hot shear blades, casings, and other similar hot work applications.
Characteristics: hot work tool steel for oil or air hardening to develop high hot strength, retention of hardness, and heat checking resistance. Applications: highly stressed hot work tools, such as mandrels, dies and containers for metal tube and rod extrusion; hot extrusion tools; tools for manufacture of hollows, screws, rivets, nuts and bolts. Die casting tools, forming dies, die inserts, hot shear blades.
1.2550 Tool Steel is an alloy shock-resisting tool steel, which is suited for both hot and cold work applications. The tungsten content of this tool steel grade confers fatigue resistance, the chromium content gives depth of hardness and resistance to abrasion. 1.2550 tool steel is suitable for cold work tools subject to heavy shock and uneven loading. This steel is also used with great success for chisels and punches required for heavy work on hard and tough materials. It is suitable for hot work applications where high fatigue strength in combination with medium hot hardness is desirable. Tools made from this tool steel can be water cooled in service with little risk of cracking.
1.2601 tool steel with high wear resistance against abrasive and adhesive, good toughness, edge-holding ability and compression strength, low distortion, non-deforming, full hardness with air hardening in any dimension, suitable for bath nitriding. 1.2601 tool steel applications mainly for making high performance blanking, punching, stamping and cutting tools and dies up to 6mm sheet thickness, thread rollings, chasers and dies, cold forming and bending tools, precision blanking dies, longitudinal and circular shear blades for plastic, paper and metal, milling cutters, reamers, broaches, hobbing tools, tools for drawing, deep drawing and cold extrusion, woodworking tools, pressing tools for the sinters, ceramics and pharmaceutical industries, cold piercers, measuring tools, rolling cutters and shaping wheels, cold pilger mandrels, flanging, straightening and beading rolls, trimming and splitting dies, tools for the cold manufacture of screws, nuts and rivets, plastic moulds.
1.2767 tool steel is a higher carbon version of the standard 4.25% nickel oil hardening steel. It is a good quality tool steel that achieves high impact and compressive strength and is suitable for applications demanding extra wear resistance. With its characteristics of good full hardenability, good polishability and excellent toughness this cold work tool steel specification is widely used for plastic mould applications. 1.2767 tool steel typical applications and components include plastic moulds, cutlery dies, shear blades for heavy gauge material, cutting tools, drawing jaws and highly stressed coining tools.
A2/1.2363 tool steel is a 5% chromium medium alloy cold work tool steel possessing sufficient hardenability to be air hardened to 60 HRC surface hardness level with good depth of hardening. This widely used tool steel has low distortion in heat treatment, good machinability, good toughness for severe service, high abrasion resistance, and deep hardening properties in large sections. A2 has a fully spheroidized structure and has exceptionally low inclusion levels. A2 is available in de-carb free rounds, flats and squares, as well as drill rod and ground flat stock. Typical applications for A2 tool steel are blanking, forming, and trim dies, stamping dies, coining dies, thread roller dies, knurls, knurling tools, mandrels, master hobs, cold forming tools, spindles, shear blades, slitter blades, molds, punches, block and ring gauges, punch plates, reamers, brick mold liners, forming rolls, etc.
D2/1.2379 cold work tool steel is chrome-molybdenum-vanadium steel with big hardenability for hardening in oil and in air, especially high resistance to the wear (higher than by 1.2080), good cutting power, very good firmness in the pressure, lower toughness (but higher than by 1.2080). This steel shows good dimensional stability at the heat treatment, suitable for hardening to the secondary hardness (the possibility of nitriding). Further the steel is very difficult to sharpen, it works at the heat with difficulties and has a rather difficult workability in the annealed state. D2/1.2379 is suitable for making tools for cold cutting, i.e. all kinds of tools with the long durability for cutting on presses and punching of materials of smaller thicknesses and materials of high hardness (especially difficult-shape tools for cutting, e.g. transformer metal sheets and metal sheets from stainless steels), knives for plate shears for the sheet and strip steel up to thickness of 10 mm of sheared material, knives for wire cutting etc. Tools for mechanical working such as e.g. smaller girders and tools for drawing, all kinds of tools for transformation and punching of materials. Further the steel is suitable for simple and symmetric tools for pressing and pushing, tools for thread rolling, plain and profile rolls, swages and also for cold work. Cutting tools such as broaching thorns, profile knives and difficult-shape milling machines for lower cutting speeds and for treatment of nonmetallic abrasive materials. Further the steel is applied in the production of highly stressed molds and their components for working of plastic and powder substances, glass, porcelain and ceramic materials. By tools for crushing and grinding it is used for hammers of crushers and jaws for mild grinding and crushing.
Hot Rolled piece
Electric Power Transmission Line Steel Tower : 1. Price Term: EXW, FOB, CFR or CIF. The price include pole shaft, base plate, crossarm ,anti-climbing device, fasten parts and anchor bolt. Shipping seaport: Qingdao Seaport. Please provide drawings if you have so that we can calculate the accurate price for you. We also provide design according to your requests, if you don't have drawings. 2.Certificate :ISO 9001:2008,ISO14001: 2004, OHSAS 18001:2007 3. Performance Standard Besides conforms to the drawing and design, the materials and fabrication of tower components shall conform to the following standards (Chinese Standards) and customer's requirements. 4. Steel pipe tower welded requirements 1 )we used CO2 welding and submerged arc auto welding or other methods as AWS D1.1 2 )Welded seam shall be full penetration and grinded. 3 )The welded product has no fissure, scar, overlap, layer or other defects. 5. Steel tower Galvanization All steel items, bolts, nuts, washers & other components to be hot -DIP galvanized with uniform. As per (ASTM-A-123). 5. MOQ: One 40FT Container. 6. Payment Term: Typically 30% by T/T as deposit, balance by T/T or L/C at sight before shipment. Other payment way can be negotiated. 7.Delivery Time: 2 weeks per container after PO/drawing/prepayment confirmed. 8. Package: Normally wrapped by plastical bags ,mat or burlap cloth at the top and bottom,or according to clients requirement. as client's requirement
Diameter:38mm, length:5.8-12mm Standard seaway package
Seamless steel pipe have a wide application to the general structure, mechanical structure, boiler and transport liquid with seamless steel tubes Outer diameter :13.72mm-726mm Wall thickness:1.25mm-100mm
IN / EN / AD-W norms: EN1092-1 Circular flanges for pipes, vales, fittings and accessories, PN designated - Part 1: Steel flanges => Type 01, Type 02, Type 04, Type 05, Type 11, Type 12, Type 13, Type 21 DIN 2519: Steel flanges, technical terms of delivery (Stahlflansche, Technische Lieferbedingungen) DIN 2526: Flanges, types of contact faces (Flansche, Formen der Dichtflächen) => DIN 2512, DIN 2513, DIN 2514, DIN 2695, DIN 2696 DIN 2528 Flanges, steel flanges ready for use, materials (Flansche, Verwendungsfertige Flansche aus Stahl, Werkstoffe) Welding neck flange DIN2633 PN16, DIN2632 PN10, DIN2635 PN40, DIN2631 PN6, DIN2634 PN25, DIN2636 PN64, DIN2637 PN100, DIN2628 PN160, DIN2629 PN320, DIN2627 PN400, DIN2628 PN250, DIN2630 PN2,5 Flat flange / plain flange S DIN2576 PN10, DIN2573 PN6 Blind flange DIN2527 PN16, DIN2527 PN6 => PN400, DIN28124 Lapped flange DIN2642 PN10, DIN2641 PN6, DIN2655 PN25, DIN2656 PN40, DIN2673 PN10, DIN2674 PN16, DIN2676 PN40, DIN86037 Threaded flange DIN2566 PN16, DIN2565 PN6, DIN2567 PN40, DIN2568 PN64 Oval flange DIN2561 PN10/16, DIN2558 PN6 Flat bund DIN2642 PN10, DIN2655 PN25, DIN 2641 PN6, DIN2656 PN40 Welding neck bund DIN2673 PN10, DIN2674 PN16, DIN2676 PN40 Block flange DIN28117/A PN10, DIN28117/A PN16, DIN28117/A PN40, ook DIN28117/B Special flanges: DIN28120, DIN28031, DIN28032, DIN28036, DIN28038, DIN28034, DIN28038, DIN28025, DIN28117, DIN28137, DIN28139, DIN28141, DIN28030, DIN28033, DIN28035, DIN28037, DIN86029 PN10, DIN86030 PN16, DIN86041, DIN86044, DIN86041 PN10/16, DIN28461, VG-Norm 85227 / 85228, VG-Norm 85355 / 85356
Sheetray provides one-stop business services for oversea customers who imports metal-made from china factories. In sheetray, we exclusively focus on metal products. Briefly we focus on: --- metal raw material --- metal casting --- metal die and mold --- metal machining --- sheet metal fabrication --- metal hardware and accessory. The services we provide include: --- supplier sourcing: we help customers to seek for competitive suppliers according to their product specifications. --- factory audit: we help customers to make on-site factory audit to verify that the supplier is well-organized and well-equipped for the customer's specific products. --- quality control: we help customers to supervise the mass production in the factory to control the quality and production lead time. --- container loading check: we help customers to supervise the container loading in the factory to make sure package and transportation is safe and saving. --- technical support and factory-visit assistance: we provide value-added services for customers. Sheetray, different from other third-party inspection company, is working at providing project management for customers. That means, we help customer to take charge of everything relative to their projects in order to save time, cost, energy for customers while at the same time enable customers to receive quality products on time. For more information on sheetray, please go to www.Sheetray.Com We are your buying agent in china!
Telecommunication camouflaged tower is a communications tower it make the surrounding natural environment in harmony,effectively solve the difficult problem of establishment of the station at National Scenic Area.it take of synthetic resin and advanced chemical raw materials as sculpture substrate for tree trunk , the tree section , bark , roots , etc.It was sprayed of advanced acrylic paint to modify and protect surface.The products enhanced durability is up to 5 years not fade,10 years does not crack and fall off. Camouflaged telecom tree tower advantages: The Structure is refined and realistic , the appearance is elegant and beautiful .Bionic Tower produced modeled on the actual plant.It installed in the bush of the scenic areas, parks , squares ...into the natural.Communication Tree tower humane shape design have the vibrant flavor of the times. In bundle or according to customer requirement
Power Transmission Tower 1. Based on its shapes, it is generally divided into 5 types: Goblet type, cathead type, cathead type, shaped type and barrel type. Based on application, it can be divided into: Strain tower, straight line tower, angle tower, transposition tower (tower for transposition of wire phase position), terminal tower and crossing tower, etc. 2. Their structural features are: All kinds of towers are of space truss structures; Bard are mainly composed of single equal angle steel or assembling angle steel; Materials are generally Q235(A3F) and Q345(16Mn); Bars are connected by black bolts with shearing force; Entire tower is composed of angle steels, link plates and bolts; A few components like tower base are assemblies of welded steel plates for convenience of hot galvanizing anti-corrosion, transportation and erection. 3. For steel towers that with height below 60m, shackles are mounted on one of main columns for construction people to climb to work. Our Company is a large scale enterprise specializing in manufacturing of 220KV (330KV) electric power steel tower with advanced manufacturing facility and international top-ranking assembly line. In bundle or according to customer requirement
100% steenless steel 50kg
Requirement for 6 meter long mild steel angles with Hot Dip Galvanized Finishing. HDG coating required is from 30 to 60 microns. Big Quantity Requirement but starting with 1 containers per month Sizes and thickness 30mm x 30 mm with thickness 3 mm 40mm x 40 mm with thickness 4 mm 50mm x 50 mm with thickness 5 mm Thickness Tolerance is not more than 0.1 mm Quantity and Weight Details Sizes Wt in kgs per pcs 30x 30x 3 7.65 40x 40x 4 14.16 50x 50x 5 20.59 Weight variation acceptable not more than 2% Approx 25 ton Total weight 25000 Kgs approx
Material:Q235 or Q345 life span:more than 30 years surface treatment:hot galvanized or painting Place of Origin : Hebei Hight:5meters-60 meters Shape:steel structure Size and style :depending on your order according to customer's request.
Material:Q235 or Q345 life span:more than 30 years surface treatment:hot galvanized or painting Place of Origin: Hebei Hight:5meters-60 meters Shape:steel structure Size and style:depending on the order Delivery:15-45days\depending on the quantity according to customer's request.
Material:Q235 or Q345 life span:more than 30 years surface treatment:hot galvanized or painting Place of Origin : Hebei Hight : 5meters-60 meters Shape : steel structure Size and style:depending on your order according to customer's request.
