Hot-dip galvaning is a process in which the wire is dipped in zinc to create a zinc coating. Hot-dip galvanized steel wire has the advantages of corrosion resistance, good weather-resistance and long life, so it is widely used in many fields.
The requirements for hot-dip galvanized steel wire are as follows:
1. Uniform galvanized layer: The galvanized layer of hot-dip galvanized steel wire should be uniform and dense, without defects such as uneven galvanizing, wrinkling, and falling off.
2. The thickness of the zinc layer is appropriate: the thickness of the zinc layer of the hot-dip galvanized steel wire should meet the standard requirements to ensure its corrosion resistance.
3. Good surface: The surface of hot-dip galvanized steel wire should be smooth, without obvious burrs and oxides.
4. Strong adhesion of galvanized layer: The galvanized layer of hot-dip galvanized steel wire should have good adhesion and not easy to peel off.
5. The chemical composition of galvanized steel wire is stable: the chemical composition of hot-dip galvanized steel wire should meet the relevant standards to ensure its quality stability.
6. The size of the galvanized steel wire is accurate: the diameter, strength and other dimensional parameters of the hot-dip galvanized steel wire should meet the standard requirements to ensure its performance.
In short, the requirement of hot-dip galvanized steel wire is to ensure that its galvanized layer has good quality and stable performance, so as to improve its corrosion resistance and life.
size: 0.4-4.0mm
Coil wight: 25kg,50kg,100kg or as customer's request
Package:plastic film inside, hessiaon cloth outside or plastic film inside, weaving bag outsideand
Materials: Low Carbon Steel Q195 wire rod
Process: Wire Rod �¢?? Drawn Wire �¢?? Annealed �¢?? Acid Washing �¢?? Galvanized �¢?? Wire Coiling
Usage: mainly used in construction, handicrafts, weaving nets, communications equipment, medical equipment and
brushes, cables, filters, high pressure pipe industry.
Spring Steel WireSV Trade is a leading supplier & Exporter of Spring Steel Wire, according to appropriate standards as well as customer specifications in a large variety of steel grade and dimensions.
Specific requirements on execution, tolerances, lengths, mechanical and corrosion properties are offered on request
SV Trade is a leading supplier & Exporter of Galvanized Wire (Hot Dipped & Electro Galvanized Wire), according to appropriate standards as well as customer specifications in a large variety of steel grade and dimensions.
Specific requirements on execution, tolerances, lengths, mechanical and corrosion properties are offered on request
4909 Steel Wires Suppliers
Short on time? Let Steel Wires sellers contact you.
Material: 45#- 75#,77B,Q235 etc
Dia: 1.0mm-6.0mm
Zinc coating :100g/m2 - 800g/m2 Grade A/ B /C�£??
Breaking strength:350mpa-2200mpa
Steel wire (dia:1.0mm-7.0mm ) for ACSR,preformed line products and so on.
Standard: ASTM B 498,ASTM A 411 AS 3863,BS 4565 ,JIS G 3548 ,EN 10264
we can offer high-quality products with good and smooth surface,no joints, uniform and continuous coating,free from imperfections not consistent with good commercial practice.The zinc coating can be up to 800g/m2 for 3.0meter. We can also provide galvanized wire to meet the specific requirements of our customers.
Material:45#- 75#,77B,Q235etc
Dia: 1.0mm-6.0mm
Constructions :1X3, 1X7 ,1X19,1X37
Zinc coating :100g/m2 - 800g/m2 Grade A/ B /C ?
Breaking strength:350mpa-2200mpa
YB/T 5004-2001, GB/T 3428-2002,CAN/CSA-G12,BS 183/BS443,BS EN 10244,ASTM A 475,ASTM A 363
Its widely used in domestic & abroad power, cable, telecommunication, broadcast and television industries. We can produce very heavy zinc thickness steel wire,for example 800 g/m2 for 3.00mm.
Packaging Details: water-proof paper on drums or in coils
Delivery Time: 20 days after confirmed order Payment Terms: L/C,T/T
Grades Utilities, Common, Siemens-Martin, High Strength and Extra High Strength
Finish Coatings Class A, B and C
Specifications
ASTM A925 -5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
ASTM A855 Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
Galfan a superior corrosive coating of 5% Aluminum and 95% Zinc.
We can offer high-quality products with good and smooth surface,no joints, uniform and continuous coating,free from imperfections not consistent with good commercial practice.The zinc coating can be up to 800g/m2 for 3.0meter. We can also provide galvanized wire to meet the specific requirements of our customers.
Place of Origin: Hebei Province, China
Manufacturer: Honorwin
Wire diameter: 1.6mm or more
MOQ: Two tons
Sales Scope: Worldwide
Support shipping method: sea
The quality of the galvanized layer can be evaluated by the weight of the zinc plated on the substrate, the bonding force between the galvanized layer and the substrate, and the uniformity of the coating. The uniformity of the zinc layer is an important quality indicator of the zinc coating. In general, the corrosion always starts at the thinnest part of the zinc layer and spreads around, resulting in rust, broken wires and affecting the service life. For the coating weight and bonding strength, each standard has clear regulations, but the uniformity is different. In the 1970s, the ISO standard and the standards of various countries in the world generally stipulated that the copper sulfate test should be used for inspection. By the 1980s, with the exception of Japan and the former Soviet Union, ISO standards and standards around the world no longer adopted this method. Although our country has retained this method in some standards such as GB/T15393-94 "Steel wire galvanized layer" in the form of "can be carried out by mutual agreement", most of them are no longer adopted. However, the old zinc coating uniformity detection method has been abandoned but no corresponding new methods have been established. In addition, there is no uniform definition and requirement for uniformity, so that some producers do not monitor and detect the uniformity of the coating well. , So as to affect the further improvement of product quality
Cemented carbide wire drawing dies is a special and precision tool which cuts and forms sheet metal into a desired shape or profile. The cutting and forming sections of dies typically are made from special types of hard steel called tool steel. Dies also can contain cutting and forming sections made from carbide or various other hard, wear-resistant materials.
Wire Cut EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance.
Specification
Wire Cut EDM, also known as (wire electrical discharge machining or wire EDM) is a high-precision method for cutting nearly any electrically conductive material. A thin, electrically-charged EDM wire held between upper and lower mechanical guides forms one electrode, while the material being cut forms the second electrode. Electrical discharge between the wire and the workpiece creates sparks that rapidly cut away materials.
Application of Wire Cut EDM:
The wire cut EDM is suit to cut the metal stamping mould, plastin mould, super abrasive materials, precious metals and cutting sheets, gear cutter hob, mechanical parts processing ,etc
EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance
Advantages of Wire Cut EDM:
* The process is burr-free, distortion-free and can be used to machine exotic materials which are work-hardened, ductile or brittle.
* High Precision. It is capable of making cuts that match your designs within �± 0.0001â??.
* Less set up time. EDM manufacturing reduces the need for tooling, which in turn lessens the amount of time that it takes to set up.
* Tapers. EDM machining is useful for cutting long tapers that other machining methods cannot produce.
* Accurate internal cuts. Square-edged internal cuts are difficult to produce with other machining methods, but Wire EDM makes it possible.
* Fine hole drilling. EDM drilling is capable of producing tiny holes that are difficult to produce with other methods.
Wire Cut EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance.
Specification
Wire Cut EDM, also known as (wire electrical discharge machining or wire EDM) is a high-precision method for cutting nearly any electrically conductive material. A thin, electrically-charged EDM wire held between upper and lower mechanical guides forms one electrode, while the material being cut forms the second electrode. Electrical discharge between the wire and the workpiece creates sparks that rapidly cut away materials.
Application of Wire Cut EDM:
The wire cut EDM is suit to cut the metal stamping mould, plastin mould, super abrasive materials, precious metals and cutting sheets, gear cutter hob, mechanical parts processing ,etc
EDM machines which are widely used in the fields of moulds, automobile parts, aeronautics and astronautics, electronic instrument, military, light industry, and household appliance
Advantages of Wire Cut EDM:
* The process is burr-free, distortion-free and can be used to machine exotic materials which are work-hardened, ductile or brittle.
* High Precision. It is capable of making cuts that match your designs within �± 0.0001â??.
* Less set up time. EDM manufacturing reduces the need for tooling, which in turn lessens the amount of time that it takes to set up.
* Tapers. EDM machining is useful for cutting long tapers that other machining methods cannot produce.
* Accurate internal cuts. Square-edged internal cuts are difficult to produce with other machining methods, but Wire EDM makes it possible.
* Fine hole drilling. EDM drilling is capable of producing tiny holes that are difficult to produce with other methods.
Tianjin Zhongyou Metal Product Co.,Ltd is professional manufacturer with many years experience on metal wire.Founded in 1985, we have produced and exported galvanized
CONSTRUCTION:
Inner tube:Oil-resistant synthetic rubber,Reinforcement: 1layer or 2layers braid of high-tensile steel wire,Outer cover: Abrasion and ozone-resistant synthetic rubber,Temp. range: -40C to + 100C Max.120�°C intermittent
APPLICATIONS:
SAE 100 R1AT/R2AT DIN EN853 1SN/2SN Hydraulic Hose is recommended for hydraulic system service with petroleum and water-base fluids, or general industrial service. Long-lasting cover is suitable for many mobile hydraulic applications.Durable cover idea for mobile hydraulics (farm equipment,logging,construction,andmore),No,skivingrequired,Can be used with crimp fittings or available SAE 100R2AT field-attachable fittings,Available sizes from 1/4" to 2" ID
address:hebei,China,ProductionCapacity:1000000Meters,Material:Natural,Rubber,Capability,Rubber Oil Hose,Color:Black,Our company has advanced equipment of production, test and inspection, advanced technology, well-built system of management and quality assurance. Our main products include series of hydraulic rubber hoses, such as steel wire braid hoses,steel wire spiral hoses, metal hoses, teflon hoses, refuel hoses andhose couplings. Our market share is increasing widely applied in mining, metallurgy, petroleum, engineering mechanism and chemistry.
4909 Steel Wires Suppliers
Short on time? Let Steel Wires sellers contact you.
