Find Verified Steel Wires Suppliers, Manufacturers and Wholesalers

0.8mm Brass Coated Wire for Rubber Hose
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Advantage of
0.8mm Brass Coated Wire for Rubber Hose
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support

0.28mm Brass coated steel wire for hose reinforcement
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Advantage of
0.28mm Brass coated steel wire for hose reinforcement
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support
INTRODUCTION:0.28mm Brass coated steel wire for hose reinforcement
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 60,000 tons of brass wire for hose reinforcement
ISO/TS 16949 And ISO9002 certificated
One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003

0.25mm/0.28mm brass coated steel wire used in hose
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Advantage of
0.25mm/0.28mm brass coated steel wire used in hose
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support

Advantage of
0.30mm brass coated hose steel wire for rubber hose
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support
0.30mm brass coated hose steel wire for rubber hose
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
0.30mm brass coated hose steel wire for rubber hose
Item: Copper Plated Hose Reinforcement wire
Nominal diameter:0.2 mm
normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... ,
of course other size no problem.
Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa
(check with us please)
Material: high carbon steel grade
Surface: brass coated
INTRODUCTION:0.30mm brass coated hose steel wire for rubber hose
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 60,000 tons of brass wire for hose reinforcement
ISO/TS 16949 And ISO9002 certificated
One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003

Best Price copper coated steel wire rope for hydraulic hose
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Best Price copper coated steel wire rope for hydraulic hose
Item: Copper Plated Hose Reinforcement wire
Nominal diameter:0.2 mm
normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... ,
of course other size no problem.
Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa
(check with us please)
Material: high carbon steel grade
Surface: brass coated

Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.

Advantage of Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire
--------
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology

Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 10,000 tons of sawing wire
ISO/TS 16949 And ISO9002 certificated

Advantage of
Sawing Wire for Solar Wafer Cutiing
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
INTRODUCTION:
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 10,000 tons of sawing wire
ISO/TS 16949 And ISO9002 certificated
Can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size of h wheel.

high quality brass coated steel cord for tyre
Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire.
With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires.
Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord.
high quality brass coated steel cord for tyre
Meets the highest performance, safety, environment and cost criteria
Extends tire life
Enhanced wire-to-rubber adhesion for higher safety
Lower costs, lower weight and higher fuel savings

High quality tire steel wire cord
Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire.
With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires.
Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord.
high quality tire steel wire cord
Meets the highest performance, safety, environment and cost criteria
Extends tire life
Enhanced wire-to-rubber adhesion for higher safety
Lower costs, lower weight and higher fuel savings
high quality tire steel wire cord
INTRODUCTION:
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 60,000 tons of steel cord
ISO/TS 16949 And ISO9002 certificated
steel cord for tire reinforcement for passenger car,truck, off road tires and more

Brass coated steel sawing wire for cutting glass with below features:

Brass coated steel sawing wire for cutting glass with high carbon;

Brass coated steel sawing wire is cold drawing of brass plated of high strength steel wire;


Brass coated steel sawing wire for cutting glass with below application:

Brass coated steel sawing wire can be used for cutting high hardness of monocrystalline silicon;

Brass coated steel sawing wire can be used for cutting silicon and quartz material etc

Brass coated steel sawing wire can be used for cutting glass, magnet

Solar Wafer Cutting wire Silicon Cutting Sawing Wire
Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon.
It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc.
(1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw.
(2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity.
(3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well.
(4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few.
( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources.
Advantage of
Sawing Wire for Solar Wafer Cutiing
--------
Very thin and tensile wires of low keff loss
Hence more wafters per cut and less fractures
Make higher productivity
Tight diameter and ovality tolerances
A wide range of spool types
An advanced winding technology
INTRODUCTION:
Solar Wafer Cutting wire Silicon Cutting Sawing Wire
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 10,000 tons of sawing wire
ISO/TS 16949 And ISO9002 certificated
Can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size of h wheel.

top quality factory price copper coated steel wire rope for hydraulic hose
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Advantage of
top quality factory price copper coated steel wire rope for hydraulic hose
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support
INTRODUCTION:top quality factory price copper coated steel wire rope for hydraulic hose
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 60,000 tons of brass wire for hose reinforcement
ISO/TS 16949 And ISO9002 certificated
One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003

Advantage of
top quality factory price 0.3mm 0.35mm 0.65mm brass coated steel wire used in hose
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support
top quality factory price 0.3mm 0.35mm 0.65mm brass coated steel wire used in hose
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.

Advantage of
top quality factory price brass coated steel wire high tensile steel wire metal steel wires for rubber hose
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support

top quality factory price brass coated steel wire high tensile steel wire metal steel wires for rubber hose
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
INTRODUCTION:top quality factory price brass coated steel wire high tensile steel wire metal steel wires for rubber hose
17 years of history in steel wire transforming and coating
Listed on Shenzhen A stock market in 2007
An annual output of 60,000 tons of brass wire for hose reinforcement
ISO/TS 16949 And ISO9002 certificated
One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003

0.30mm hose wire high carbon steel wire
Item: Copper Plated Hose Reinforcement wire
Nominal diameter:0.2 mm
normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... ,
of course other size no problem.
Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa
(check with us please)
Material: high carbon steel grade
Surface: brass coated
0.30mm hose wire high carbon steel wire
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.

Copper coated wire /rubber hose wire 0.25mm
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Advantage of
Copper coated wire /rubber hose wire 0.25mm
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support

0.3mm brass coated steel wire for hydraulic hose
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
0.3mm brass coated steel wire for hydraulic hose
Item: Copper Plated Hose Reinforcement wire
Nominal diameter:0.2 mm
normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... ,
of course other size no problem.
Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa
(check with us please)
Material: high carbon steel grade
Surface: brass coated

Best Price 0.25mm 0.28mm brass coated steel wire used in hose
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.

Best Price 0.25mm 0.28mm brass coated steel wire used in hose
Item: Copper Plated Hose Reinforcement wire
Nominal diameter:0.2 mm
normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... ,
of course other size no problem.
Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa
(check with us please)
Material: high carbon steel grade
Surface: brass coated
Advantage of
Best Price 0.25mm 0.28mm brass coated steel wire used in hose
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support

Item: Copper Plated Hose Reinforcement wire
Nominal diameter:0.2 mm
normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... ,
of course other size no problem.
Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa
(check with us please)
Material: high carbon steel grade
Surface: brass coated
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.

Brass Coated Wire for Rubber Hose
(1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire.
(2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses.
(3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards.
(4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 .
(5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Brass Coated Wire for Rubber Hose
Item: Copper Plated Hose Reinforcement wire
Diameter:0.56 mm Brass Coated Steel Hose Wire
normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... ,
of course other size no problem.
Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa
(check with us please)
Material: high carbon steel grade
Surface: brass coated
Advantage of
Brass Coated Wire for Rubber Hose
Consistent high quality
Reliable and flexible supply from plants in all regions
New product development and technical support