0.8mm Brass Coated Wire for Rubber Hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Advantage of 0.8mm Brass Coated Wire for Rubber Hose Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support
0.28mm Brass coated steel wire for hose reinforcement (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Advantage of 0.28mm Brass coated steel wire for hose reinforcement Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support INTRODUCTION:0.28mm Brass coated steel wire for hose reinforcement 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of brass wire for hose reinforcement ISO/TS 16949 And ISO9002 certificated One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003
0.25mm/0.28mm brass coated steel wire used in hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Advantage of 0.25mm/0.28mm brass coated steel wire used in hose Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support
Advantage of 0.30mm brass coated hose steel wire for rubber hose Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support 0.30mm brass coated hose steel wire for rubber hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. 0.30mm brass coated hose steel wire for rubber hose Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated INTRODUCTION:0.30mm brass coated hose steel wire for rubber hose 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of brass wire for hose reinforcement ISO/TS 16949 And ISO9002 certificated One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003
Best Price copper coated steel wire rope for hydraulic hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Best Price copper coated steel wire rope for hydraulic hose Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated
Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources. Advantage of Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire -------- Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology Hengxing 0.1mm 0.12mm Brass Coated Solar Wafer Cutting Wire 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated
Advantage of Sawing Wire for Solar Wafer Cutiing Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources. INTRODUCTION: 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated Can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size of h wheel.
high quality brass coated steel cord for tyre Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire. With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires. Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord. high quality brass coated steel cord for tyre Meets the highest performance, safety, environment and cost criteria Extends tire life Enhanced wire-to-rubber adhesion for higher safety Lower costs, lower weight and higher fuel savings
High quality tire steel wire cord Brass plated steel cord which is made from high carbon steel high-strength strands,is the inside reinforcement structure for radial tire. With strong coating,nice surface quality,average mechanical property,full stress relieving,the steel cord are widely used in radial tires for automabile and other tires. Hengxing can produce steel cord for many types of radial tire,including compact cord,high elongation cord,high impact cord and betru cord. high quality tire steel wire cord Meets the highest performance, safety, environment and cost criteria Extends tire life Enhanced wire-to-rubber adhesion for higher safety Lower costs, lower weight and higher fuel savings high quality tire steel wire cord INTRODUCTION: 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of steel cord ISO/TS 16949 And ISO9002 certificated steel cord for tire reinforcement for passenger car,truck, off road tires and more
Brass coated steel sawing wire for cutting glass with below features: Brass coated steel sawing wire for cutting glass with high carbon; Brass coated steel sawing wire is cold drawing of brass plated of high strength steel wire; Brass coated steel sawing wire for cutting glass with below application: Brass coated steel sawing wire can be used for cutting high hardness of monocrystalline silicon; Brass coated steel sawing wire can be used for cutting silicon and quartz material etc Brass coated steel sawing wire can be used for cutting glass, magnet
Solar Wafer Cutting wire Silicon Cutting Sawing Wire Sawing wire , also called ultra fine wire,is cold drawing high strengh brass plated steel wire with high carbon. It can be used for cutting high hardness of single crystal line silicon,poly crystal line silicon,quartz material,etc. (1)Sawing wire is a high grade steel wire that can be used to cut a wide range of products.It serves as the abrasive carrier in a Multi Wire Saw. (2)The technique finds its origin in the world of solar cells. From the mid eighties, this technology was developed to decrease kerf loss and increase productivity. (3)In the early nineties the method was introduced for slicing silicon ingots to wafers for the electronics industry. Since then the technique has been more and more introduced for cutting other hard and brittle materials as well. (4)Saw wire is used to cut a wide variety of products, such as silicon, germanium, gallium aresenide, quartz, indium phosphide, to name only a few. ( 5 )Saw wire is mostly used in the production of solar cells. The use of photovoltaic energy is increasing, as humanity becomes more and more aware of the scarcity of the natural resources. Advantage of Sawing Wire for Solar Wafer Cutiing -------- Very thin and tensile wires of low keff loss Hence more wafters per cut and less fractures Make higher productivity Tight diameter and ovality tolerances A wide range of spool types An advanced winding technology INTRODUCTION: Solar Wafer Cutting wire Silicon Cutting Sawing Wire 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 10,000 tons of sawing wire ISO/TS 16949 And ISO9002 certificated Can provide all kinds of all kinds of the length of the wire, the line length subject only to the spool take-up capacity limit. H wheel type mainly includes NTC210 type, BS200, BS64, BS126, etc. According to customer needs to provide other specification size of h wheel.
top quality factory price copper coated steel wire rope for hydraulic hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Advantage of top quality factory price copper coated steel wire rope for hydraulic hose Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support INTRODUCTION:top quality factory price copper coated steel wire rope for hydraulic hose 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of brass wire for hose reinforcement ISO/TS 16949 And ISO9002 certificated One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003
Advantage of top quality factory price 0.3mm 0.35mm 0.65mm brass coated steel wire used in hose Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support top quality factory price 0.3mm 0.35mm 0.65mm brass coated steel wire used in hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Advantage of top quality factory price brass coated steel wire high tensile steel wire metal steel wires for rubber hose Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support top quality factory price brass coated steel wire high tensile steel wire metal steel wires for rubber hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. INTRODUCTION:top quality factory price brass coated steel wire high tensile steel wire metal steel wires for rubber hose 17 years of history in steel wire transforming and coating Listed on Shenzhen A stock market in 2007 An annual output of 60,000 tons of brass wire for hose reinforcement ISO/TS 16949 And ISO9002 certificated One of China standard settlers for the steel wire for rubber hose reinforcement GB/T 11182-2003
0.30mm hose wire high carbon steel wire Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated 0.30mm hose wire high carbon steel wire (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Copper coated wire /rubber hose wire 0.25mm (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Advantage of Copper coated wire /rubber hose wire 0.25mm Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support
0.3mm brass coated steel wire for hydraulic hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. 0.3mm brass coated steel wire for hydraulic hose Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated
Best Price 0.25mm 0.28mm brass coated steel wire used in hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Best Price 0.25mm 0.28mm brass coated steel wire used in hose Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated Advantage of Best Price 0.25mm 0.28mm brass coated steel wire used in hose Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support
Item: Copper Plated Hose Reinforcement wire Nominal diameter:0.2 mm normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance.
Brass Coated Wire for Rubber Hose (1)Brass Plated Steel Wire for Hose Reinforcement, also called Rubber Hose Steel Wire, Brass Plated Steel Wire, Brass Coated Steel Wire, Copper Coated Steel Wire, Copper Plated Steel Wire. (2)Hose Wire ,is used as braided or spiral wrapped reinforcement for rubber and thermoplastic high pressure hoses. (3)Hose reinforcement wire enables high pressure hydraulic hose manufactures to produce braided hoses that meet the hightest performance and quality standards. (4)Besides the standard brass coated steel wires from 0.20 up to 0.50mm with tensile strengths up to 3500N/mm2 . (5)Hengxing constantly develops new products as higher tensile strength wires,large diameter wires and solutions to improve hose impulse life,increase hose flexibility and increase adhesion performance. Brass Coated Wire for Rubber Hose Item: Copper Plated Hose Reinforcement wire Diameter:0.56 mm Brass Coated Steel Hose Wire normally size 0.2mm,0.25mm 0.3mm 0.35mm 0.4mm 0.5mm 0.6mm 0.65mm.... , of course other size no problem. Tensile strength:2150 Mpa/2450Mpa/2750Mpa/3050Mpa/3350Mpa (check with us please) Material: high carbon steel grade Surface: brass coated Advantage of Brass Coated Wire for Rubber Hose Consistent high quality Reliable and flexible supply from plants in all regions New product development and technical support
