Din 2391-1 cold drawn honed seamless steel tube Standard: din 2391-1 Materials: st35, st45, st52 Technical: cold-drawn seamless Delivery condition: bk.Bkw, bk+s, gbk, nbk Straightness: 0.5mm/1m max for tubes below 3m, 0.8mm/1m max for tubes between 3 to 6m, 1.2mm/1m for tubes above 6m Technology: honed & srb(skived and roller burnished). Application: used in the hydraulic cylinder of the heavy machinery, cranes, excavator and forklifts.
Astm a519 honed seamless steel tube for hydraulic cylinder Standard: astm a519 Materials: 1020, 1035, 1045, 4130, 4140 Technical: cold-drawn seamless Delivery condition: bk.Bkw, bk+s, gbk, nbk Straightness: 0.5mm/1m max for tubes below 3m, 0.8mm/1m max for tubes between 3 to 6m, 1.2mm/1m for tubes above 6m Technology: honed & srb (skived and roller burnished). Application: used in the hydraulic cylinder of the heavy machinery, cranes, excavator and forklifts.Etc
En 10305-1 honed seamless steel tube for hydraulic cylinder Standard: en 10305-1, en 10305-4 Materials:e215, e235, e255, e355, c35e, c45e, 25crmo4, 42crmo4 Technical: cold-drawn seamless Delivery condition:bk.Bkw, bk+s, gbk, nbk Straightness: 0.5mm/1m max for tubes below 3m, 0.8mm/1m max for tubes between 3 to 6m, 1.2mm/1m for tubes above 6m Technology:honed & srb(skived and roller burnished). Application: used in the hydraulic cylinder of the heavy machinery, cranes, excavator and forklifts.Etc
Cold Drawn Seamless Steel Pipe as implied is made by cold drawing a larger mother seamless pipe, which is generally manufactured through an HFS process. In the Cold Drawn Seamless process, the mother pipe is pulled through a die & plugin cold without any heating. Because of the tool on the outside and inside the surface and tolerances are better in Cold Drawn Seamless. While this is an additional process over HFS, it is necessary to get smaller size pipes that otherwise cannot be manufactured in HFS. Some applications which require close tolerances and smooth surfaces also specify the requirements to be necessarily Cold Drawn Seamless. Cold Drawn Seamless pipes & tubes are extensively used in Heat-Exchanger, Bearing & Automotive sectors. Cold drawn seamless steel pipe is used for the mechanical structure, hydraulic equipment, which has precision size, good surface finish. It can greatly reduce mechanical processing hours and improve material utilization, and improve the quality of products. High-quality cold-drawn seamless steel pipes are mainly using the 10# 20#. In addition, to ensure chemical composition and mechanical properties, it will check by the Hydrostatic test, crimping, flared, and Squashed test. Cold Drawn Seamless (CDS) as implied is made by cold drawing a larger mother seamless pipe, which is generally manufactured through an HFS process. In the CDS process, the mother pipe is pulled through a die & plugin cold without any heating. Because of the tool on the outside and inside the surface and tolerances are better in CDS. While this is an additional process over HFS, it is necessary to get smaller size pipes that otherwise cannot be manufactured in HFS. Some applications which require close tolerances and smooth surfaces also specify the requirements to be necessarily CDS. CDS pipes & tubes are extensively used in Heat-Exchanger, Bearing & Automotive sectors.
Structural Tubing: used for support or retention purpose. This tubing can be round or square and are produced by ERW manufacturing. They are used for fences, construction and other misc. support needs.
Our #scaffolding #steel tube production base. Provide #OneStopService, inculding #galvanized Produce range: OD: 42mm, 48.3mm, 48.6mm, 50.8mm, 60.3mm, 63.5mm, 76mm Thickness: 2-4mm Annual produce capacity: 150,000tons
Flame retardant heat shrinkable tubes are made of radiation crosslinked polyolefin materials with excellent physical, chemical and electrical properties. Their main functions are electrical insulation of connectors, anti rust and anti-corrosion of solder joints, mechanical protection and wiring harness. They are widely used in electronics, communication, automobile, ship, aircraft manufacturing and other fields Product features Heat shrinkable ratio: 2:1 High flame retardant and environmental protection shrinkage temperature 84 Â Final shrinkage temperature: 120 Service temperature: - 55 125 Standard colors: black, white, red, green, blue and other ten international standard colors
Widely used in wire connection, solder joint insulation protection, wire end treatment resistance, insulation protection of capacitors, wire mark and end metal tube, rod rust protection, antenna protection.
Company Hebei Borun Steel Trade Co., Ltd Product Name ERW Surface Treatment light-oiled, black painting , hot galvanizing, sand blasting, FBE, 2PE, 3PE etc Production Standard API 5L, ASTM A53, BS1387, EN10219, EN10210, SY/T5768 -2006, GB/T3091 -2008, GB/T9711 -1, JIS G3444, JIS G3452 Steel grade S235, S275, S355, A53, Q195, Q235, Q345, L245, L290, Gr.B, X42-70 etc O.D 1/2� -24� ( 21.3-610mm) W.T 2-20mm Length R1( 6.10-7.32m ), R2( 8.53-9.75m), R3(11.58-12.80m) packing details in bundles with steel strips or in bulk as per the loading requirements End Plain, Beveled MOQ 10 Ton Payment term T/T,L/C Delivery date According to The Specifications And the Quantities Of Each Contract Application civil building and construction, petrochemical sector, light market, fluid transferring sector, mechanical components. Main Market South and East Asia, Middle East, Europe and America
Company Hebei Borun Petroleum Pipe Manufacturing Co.,Ltd Product Name Tubing Surface Treatment Anti-corrosion Water Based Paint Production Standard API SPEC 5CT Steel grade H40, J55, N80, N80Q, L80, L80-1, L80-9Cr, L80-13Cr, P110 etc O.D 60.3~508mm W.T 4.24-16mm Length R1( 6.10-7.32m ), R2( 8.53-9.75m), R3(11.58-12.80m) packing details Protection Caps on both ends and in bundles with steel strips and two tags as per export requirements Type of upset NUE, EUE, Plain end MOQ 25 Ton Payment term T/T,L/C Delivery date According to The Specifications And the Quantities Of Each Contract Application Used as the architectural retainer for the walls of oil, gas wells Main Market South and East Asia, Middle East, Europe and America If you consider the casing and tubing of our business piping project, please call and quote. Hebei Borun Petroleum Pipe Manufacturing Co.,Ltd is a famous steel pipe supplier in China. We can provide the items you need. The timely delivery orders are all over the world. Feel free to contact us if any further questions,we will serve you as soon as possible.
Dimension range (OD inch): 2-3/8----4-1/2 Dimension range (OD mm): 60.32----114.3 Type of upset: NUE, EUE, Plain end Standard: API SPEC 5CT Main Steel Grade: H40, J55, N80, N80Q, L80, L80-1, L80-9Cr, L80-13Cr, P110 etc Type of Tubing: Non-upset tubing (NU), External-upset tubing (EUE), Integrated Joint (IJ) Length:R1( 6.10-7.32m ), R2( 8.53-9.75m), R3(11.58-12.80m) Pipe Type: Seamless (SMLS) Surface Treatment: Anti-corrosion Water Based Paint Packing: Protection Caps on both ends and in bundles with steel strips and two tags as per export requirements Application: Used as the architectural retainer for the walls of oil, gas wells Feel free to contact us if any further questions,we will serve you as soon as possible.
Telsto Cold Shrink EPDM Tubes equal to cold shrink 8420 and 8430 series A series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an in-line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs. Features 1. Simple installation 2. No tool or heat required. 3. Seals tight, retains its resiliency and pressure even after years of aging and exposure. 4. Resists moisture. 5. Wide range, size accommodation. 6. Resists acids and alkalies. 7. Resists ozone and ultraviolet light. 8. Resists fluid splashes. 9. Resists fire - will not support flame.
1.Seamless steel tube and carbon tube, seamless pipe Widely used in the hydraulic cylinder of the heavy machinery, Cranes, excavator also forklifts. Material is various, mainly STKM-13CT, ST52, CK45 and AISI 1020. We can also offer as customized seamless steel tube. 2.cold drawn steel tube/cold rolled steel tube, cold drawn pipe, cold rolled pipe, cold drawn tube, cold rolled tube Grade: 20# 45# 16Mn 25Mn 27SiMn E355 ST52 STKM11A STKM13A ST52 S45C CK45 Standard: GB/T8713 GB/T3639 DIN2391 EN10305 ASTMA519 Range: 30-300mm Length: 11m(max) The cold process can change the thickness of tube to meet client's request and offer better mechanical property. 3. Honed steel tube&SRB steel pipe, honed tube, honed tubes, honed steel pipe, honed pipe ID Tolerance: H8 H9 ID Roughness: RA0.4micron(max) Length: 6m(max) Inner roughness: Ra0.2-0.8um Straightness: 1:1000 or customized This process can improve the roughness of the inner tube to 0.2-0.8um and make inside tube more smooth which can be used for cylinder directly. 4.hydraulic cylinder steel tube, hydraulic tube, cylinder tube, hydraulic pipe, cylinder pipe (1)Product Name ST52 Hot Sale Cold Rolled Steel Pipe E355 Honed Tube (2)Material Carbon Steel Tube (3)Outer Diameter 30-250mm (4)Wall Thickness 2-30mm (5)Material Grade ST52,E355,CK45,A106,A53,SKTM11A,STKM13A,STKM13C,S45C,and so on (6)Delivery Condition BK/BKS/GBK/NBK (7)Delivery time within 20-30 days after receiving prpayment (8)Trade Terms FOB Yantai, Qingdao or any other China main port
0.1ml PCR Plate 4 Tubes and 4 Caps Strips available on 250 Strips pack Compatible with Qiagen Rotor Gene PCR Thermal Cycler
Telsto Cold Shrink Splice Cover Kits are designed to be an easy-to-install, safe and fast method of covering splices on Spacer Cable. The tubes are open-ended rubber sleeves which are factory-expanded and assembled onto removable plastic cores. After the tube has been positioned for installation over an in-line splice, the core is removed, thus allowing the tube to shrink and seal the splice.
Product Description We can supply all kinds of condenser coated bundy tube, copper coated tube, codenser pipe, bundy tube, steel pipe 1.product name: copper coated bundy steel tube  2.standard and Materia:ASTM A254 BHG2 low carbon steel 3.Size:OD 4mm --12.7mm, W.T: 0.5mm--1.0mm 4.Copper coating thickness: 0.3um+/-0.05um 5. Treatment: copper coated 6. Product application: refrigeration,auto brake system 7.Surface outlook: Both ends of tube without rag, corner processing, smooth, absence of istortion. 8. Packing: plastic bag inside, iron frame fixed 9.Certification: ISO9001, ROHS Chemical Composition C Si Mn P S 0.08% 0.03% 0.03% 0.02% 0.02%  Chemical Composition Machnical Properties  Tensile Strength  290Mpa  Yield Strength  180Mpa  Elongation  20%  Salt spray test  24hours  Inside Surface Cleanliness  20g/m2 The tolerance allowed for the OD of the steel tube: OD The tolerance allowed (based on no coating) < 4.76 ±0.05mm 4.76 ~ 8.00 ±0.08mm > 8.00 ~ 12.00 ±0.10mm  The tolerance allowed for the thickness of the st
Product Description : Specification : Outer Diameter : 6.0 mm to 114.3 mm Thickness : 0.5 mm to 6.0 mm Specification: ASTM A-249, ASTM A-268, ASTM A-269, ASTM A-270, ASTM A-554, ASTM A·688, ASTM A-778, ASTM A-789 Product origin : India (Maharashtra) Key Specifications/Special Features : Specification : Outer Diameter : 6.0 mm to 114.3 mm Thickness : 0.5 mm to 6.0 mm Specification: ASTM A-249, ASTM A-268, ASTM A-269, ASTM A-270, ASTM A-554, ASTM A·688, ASTM A-778, ASTM A-789 Minimum Order Size and Packgaing details : Packing as per the customer requirement, Minimum order qty will be 500 mtr
Size OD: 20x10-300x400mm and 20x20-400x400mm Thickness: 2mm~20mm, Length: 3-12m or as request Steel Material Q195, Q235, Q345, Fe310, Fe360, St33, St37-2, SS330, SS400, STK400, STK500, S235, S275JR, S355, ASTM A53 Standard ASTM, ASME, DIN, GB, JIS, ASNI, BS Usage Construction, bridge, highway, windows of model steel door, machinery, chemical industry, supermarket goods shelf. Ends Usually Plain ,But Can Be Beveled Or By Your Choice Surface Black,Galvanized or According to Customers' Requirements Technique SEAMLESS,ERW and Cold Drawn Section Shape Square or Rectangular Inspection SGB, BV, Lloyds With Hydraulic Testing, Eddy Current , Infrared Test Package In square bundles with standard seaworthy export packing or as request Delivery Less Than 15/20/25/30/40/50/60 Days According To The Quantity Port Tianjin, China Payment L/C, T/T Supply Ability 10000 Ton/Month Others 1) Contract Manufacturing: OEM Service Offered, Design Service Offered, Buyer Label Offered 2) Small quantity is welcome 3) Non-standard products can be ordered 4) A strong production capacity and a large inventory guarantee the quick delivery 5) We have our own steel mill, so business without a third-party
Standard:API, ASTM Standard2:API 5L, ASTM A53-2007, ASTM A252-1998 Grade Group:10#-45#, 16Mn, A53-A369 Grade:20#, 16Mn, A53(A,B), A106(B,C) Thickness:9.53 - 40 mm Section Shape:Round Outer Diameter(Round):350 - 914 mm Place of Origin:Tianjin, China (Mainland) Application:Boiler Pipe Technique:Cold Drawn Certification:API Surface Treatment:Galvanized Special Pipe:API Pipe Alloy Or Not:Non-alloy Secondary Or Not:Non-secondary Name:j55 9 5/8" api casing tube Material:steel plate Length:6-18 Coating:3pe coating End:belved, plain Application1:oil and gas Stardard:api Supply Ability: 800 Ton/Tons per Day j55 9 5/8" api casing tube Packaging & Delivery Packaging Details Bundles or
Standard:API, ASTM Standard2:API 5L, ASTM A53-2007, ASTM A252-1998 Grade Group:10#-45#, 16Mn, A53-A369 Grade:20#, 16Mn, A53(A,B), A106(B,C) Thickness:9.53 - 40 mm Section Shape:Round Outer Diameter(Round):350 - 914 mm Place of Origin:Tianjin, China (Mainland) Application:Boiler Pipe Technique:Cold Drawn Certification:API Surface Treatment:Galvanized Special Pipe:API Pipe Alloy Or Not:Non-alloy Secondary Or Not:Non-secondary Name:j55 9 5/8" api casing tube Material:steel plate Length:6-18 Coating:3pe coating End:belved, plain Application1:oil and gas Stardard:api Supply Ability: 800 Ton/Tons per Day j55 9 5/8" api casing tube Packaging & Delivery Packaging Details Bundles or according to client's requirements j55 9 5/8" api casing tube Port Tianjin port j55 9 5/8" api casing tube
