Gframe Flat Strip is supplied in rolls weighing around 100Kg. The length is cut according to design requirements. It used in partitions of heights above 3.5m. Applications: Partition System Lining System Specifications: Thickness Unit: mm Value: 0.55 / 0.6 / 0.7 / 0.8 / 0.9 / 1.00 / 1.2 / 1.5 Standards: ASTM C1396
Gframe furring channel is roll formed in 3m strips. Widths and gauges vary according to requirements. Applications: Partition System Lining System Ceiling System Facade System Dimensions: 69
Gframe J-Track is manufactured and roll formed in 3m up to 5m strips with varying widths and gauges to match the stud dimensions. Applications: Lining System Shaft Wall System Dimensions: 64 100 150
Gframe Tee-Grid suspension system consists of Main Tee and Cross Tee profiles, combined in an interlocking manner forming an exposed grid. The T-grid framing system is made to support our Gtiles and Ctiles. The main tees form the primary frame known as the main beams. Applications: Ceiling System Dimensions: 15 24
Gframe Silent Stud is a vertical member of the partition system used to increase the acoustic performance. The unique design of the Silent Stud allows for higher and cost-effective sound insulation solutions. It is used in drywall partitioning. Applications: Partition system Lining System Dimensions: 92
Gframe Track is manufactured, and roll formed in 3 m up to 5 m strips with varying widths and gauges to match the appropriate studs. Applications: Partition System Lining System Faade Dimensions: 42 50 64 70 75 92 100 125 150
Gframe W-angle is manufactured and roll formed in 3 m strips and used in suspsended ceiling applications. Applications: Ceiling System Dimensions: 20x20 24x24
Steel Bars And Profiles: Product Description : Round Bars : bright bars - 5mm to 120mm Forged bars - 125mm to 500 mm Flat Bars : Size - 25mm to 150mm Thickness - 5mm to 20mm Angles : Size - 19x19 to 101.6x101.6 thickness - 3mm to 12.7mm AISI : 201, 202, 301, 302, 303, 304, 304H, 304L, 316, 316H, 316L, 309, 309S, 310, 310S, 316Ti, 317, 317L, 347, 321, 321H, 410, 416, 420, 430, 430F, 431, 440C, 630, 17-4PH, F51 DIN : WNR1.4301, WNR1.4305, WNR1.4306, WNR1.4307, WNR1.4401, WNR1.4404, WNR1.4571, WNR1.4541, WNR1.4828, WNR1.4841, WNR1.4845, WNR1.4449, WNR1.4438, WNR1.4310, WNR1.4550, WNR1.4541, WNR1.4878, WNR1.4006, WNR1.4005, WNR1.4021, WNR1.4028, WNR1.4016, WNR1.4104, WNR1.4105, WNR1.4057, WNR1.4542, WNR1.446 Key Specifications/Special Features : Cold Drawn, Centreless Ground, Peeled & Polished, Rough Peeled or Smooth Turned bars, Chamfered, Soft Annealing, Solution Annealing, Oil & Water Quenching, Tempering & Normalizing Hot rolled, annealed, pickled and shot blasted. Product origin : India, China, Thailand, Malaysia, Turkey, Ukraine, Etc. Minimum Order Size And Packgaing Details : Any. Packaging As Per Customer Requirements. Sea-worthy.
Steel Bars And Profiles: Product Description : Round Bars : bright bars - 5mm to 120mm Forged bars - 125mm to 500 mm Flat Bars : Size - 25mm to 150mm Thickness - 5mm to 20mm Angles : Size - 19x19 to 101.6x101.6 thickness - 3mm to 12.7mm AISI : 201, 202, 301, 302, 303, 304, 304H, 304L, 316, 316H, 316L, 309, 309S, 310, 310S, 316Ti, 317, 317L, 347, 321, 321H, 410, 416, 420, 430, 430F, 431, 440C, 630, 17-4PH, F51 DIN : WNR1.4301, WNR1.4305, WNR1.4306, WNR1.4307, WNR1.4401, WNR1.4404, WNR1.4571, WNR1.4541, WNR1.4828, WNR1.4841, WNR1.4845, WNR1.4449, WNR1.4438, WNR1.4310, WNR1.4550, WNR1.4541, WNR1.4878, WNR1.4006, WNR1.4005, WNR1.4021, WNR1.4028, WNR1.4016, WNR1.4104, WNR1.4105, WNR1.4057, WNR1.4542, WNR1.446 Key Specifications/Special Features : Cold Drawn, Centreless Ground, Peeled & Polished, Rough Peeled or Smooth Turned bars, Chamfered, Soft Annealing, Solution Annealing, Oil & Water Quenching, Tempering & Normalizing Hot rolled, annealed, pickled and shot blasted. Product origin : India, China, Thailand, Malaysia, Turkey, Ukraine, Etc. Minimum Order Size And Packgaing Details : Any. Packaging As Per Customer Requirements. Sea-worthy.
Type Prefabricated Structures Material Stainless Steel Grade AISI Color Grey Feature Corrosion Proof, Perfect Shape Finishing Polished
Material Prefabricated Steel Shape Rectangular Color Grey Feature Corrosion Proof, Excellent Quality Finishing Polished
ANGLE/CHANNEL/FLATS/ROUND/HEX BARS/ COILS &PLATES Stockist for IS 2062 GRADE / Stainless Steel WITH BELOW SIZES 25 x 25 x 3mm to 130 x 130 x 12mm, 75 x 40 TO 400 x 100 4MM TO 6MM THICKNESS SAIL, VIZAG, JINDAL, REPUTED MILL
We company has the qualification of general contracting of housing construction engineering, first-class engineering contracting, the general contractor of construction, general contracting of road construction and general contracting of municipal engineering. There are hundreds of engineers and materialman. Products and services include road, railway, tunnel, municipal engineering, design consulting, steel structure, real estate development. we sell construction steel,Galvanized steel, Steel plate, steel coil, roof, iron fence, aluminum alloy, H-beam, stainless steel, channel steel, square steel, steel pipe, steel wire,Billet, wire, I-beam, angle steel, rebar, billet, wire rod and other steel materials, building glass, tempered glass, doors and windows, plywood, ceramic tile, Cement clinker, Smart home, Welcome to purchase our services and products .
Stocked steel grades: 12/14% Manganese, X120 Mn12, X120 Mn13, Creusabro M, ASTM A128 Grade B2, DIN W1.3401, Z120 Mn12. 2mm-12mm + Up to 600 HB MANGANESE STEELS A high manganese, fully austenitic, quench annealed, non-magnetic, work hardening steel with an exceptionally high level of wear resistance when subjected to work hardening by shock or high impact pressure in service. Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plates) up to an in-service hardness of at least 600BHN. This work-hardening capability renews itself through out in-service life. The underlayers not work-hardened maintain an excellent resistance to shock and a very high ductility. TYPICAL APPLICATIONS: Quarries and Constructions: Earth moving crusher jaw, grizzly, screen, stone chutes, chain guide and shredder plates, shovel buckets. Mines: Bucket blade of loader, chain conveyor parts, sprocket wheel, various armouring elements. Iron Industry, Foundry: Guiding and shifting plates, scraps container, liner of shot blasting unit, pedestal liner, flanged bolster cup, wear liner. Concrete and Brickworks: Core and dividing wall of parpen mould, grinding mill scraper, mixer paddle. Scraps - Recoveries: Wheel disk, striker and hammer mill. Automotive Industries: Shot blasting equipment. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Payment: L/C, T/T, Cheque, Transfer, Cash, VISA.
Stocked steel grades: CORTEN, COR-TEN A, COR-TEN B, S355J2WP+N, S355J2W+N, S355JOWP, S355JOW, S355J2W, PATINAX, ASTM A242, ASTM A588, 1.8946, 1.8965. 1mm - 50mm 345-355 HB COR-TEN/CORTEN STEELS Weather resistant structural steel. The anticorrosive properties of weather resistant steel are better than those of other structural steels in many applications. The steel is self-protecting: the rust layer on the surface becomes a tight oxide layer that slows down the progress of corrosion. The steel is an economical, long-lasting and fully recyclable material. TYPICAL APPLICATIONS: The steel is used for various types of welded, bolted and riveted constructions e.g. steel frame structures, building cladding, metal sculptures (Angel of the North), agricultural vans, railway wagons, chimneys, bridges, water pipes, fans, boilers, tanks and containers, exhaust systems, vehicles and equipment constructions. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Payment: L/C, T/T, Cheque, Transfer, Cash, VISA.
-Light steel structure, designed specially to bear weight as floor without inside materials, with one piece of structure buckled with another one to form the whole floor, usually used in auditorium, cinema, conference hall, etc. The total weight of the structure is light, but the weight it can support is huge.
ZB 100 /321 Bailey Bridge,single lane Product Details: Place of Origin:China Brand Name:Zhongye Model Number:ZB100;321 Certification:ISO ,SGS ,CCIC Payment & Shipping Terms: Price:FOB 1000USD ~1500USD Delivery Time:one month Payment Terms:T/T ,LC at sight Supply Ability:10000Tons Minimum Order Quantity:1 Minimum Order Quantity:1 set Description ZB100/ 321 Bailey Bridge ----Specification * Standard : ASTM, GB * Material : Q345B * Panel Size : 3000mm * 1500mm*176mm * Type : heavy * Application Scope : Road Construction ; Railway Construction ; Emergency Usage ; Military Usage : Introduction: ZB100 Bailey Bridge is a standard bridge equipment, adopted extensively and the most popular in the world, possessing the features of simple structure, convenient transport, speedy erection and easy disassembling, while having the advantage of heavy loading capacity, great stability and long fatigue life being capable of an alternative span, loading capacity and mixture form to erect all kinds of Temporary Bridges, Emergency Bridges and Fixed Bridges. The bridge has the advantages of few components, light weight and low cost. Bailey bridge is similarly like compact 100,compact 200 International bridge. it is assembled by each 3m panel, and invented by Donald Bailey. The 321 panel bridge can be easily dissembled and rapidly erected. The whole bridge is made by high-tensile strength steel. Main beam is light weight panels and the panels are connected by panel connection pins. It is easy to assemble or disassemble and transport. It can also be assembled into different forms of panel bridges according to their span length and transportation requirement. So, it has been widely applied as emergency transportation, temporary or permanent bridge. Its suitable load design is such like HS-15, HS-20, HS-25 and pedrail-50 etc. BULL
Suitable for screening of coal, coke, ore, limestone, widely used in power plant coal handling system, while the metallurgical, chemical, building materials, coal system is also widespread used.
Regis supplies pre-engineered steel-structure solutions to specific client requirements. We utilise some of the world's leading pre-engineered steel building manufacturers to ensure that our systems meet international requirements for both industrial and commercial usage. All our buildings must pass stringent quality testing procedures and all the design and manufacturing facilities we use adhere to ISO 9001:2000 procedures.
Project development and Static Analysis of construction project, manufacturing steel building components, assembly work at construction site.
