Fine blanking steel strip Cold rolled steel strip suitable for high volume component manufacture and presswork Pallets, crates or boxes 1 metre square
Case hardening steel strip Cold rolled mild steel strip suitable for subsequent casehardening. Supplied to all internationally recognised standards: british standard, euronorm, nfa, din, aisi, jis etc... Pallets, crates or boxes
Mild steel strip Previously manufactured to British standard we can supply this product to all internationally recognized specifications: euro norm, nfa, din, aisi, jis etc.. Pallets, crates or boxes normally 1 metre square
High carbon spring steel strip High carbon spring steel strip manufactured to internationally recognised standards: british standard, euronorm, nfa, din, aisi, jis etc... Gauges: 0.457-6.00mm Widths: 6.00-450.00mm Pallets, crates or boxes normally 1 metre square
1. Regarding of stainless strip in coil, we are very specializing in csp, b/a (cold strip for spring - hard tempered) -1.4310(aisi301), 1.4301(aisi304), 1.4307(aisi304l) and ep11(1% nickel). ** thickness : 0.07mm ~1.50mm ** width : 7mm ~ 400mm 2. Now, we would like to introduce our new substitute item of aisi 301. Our new item is a sk-5 (t/s 2000 ~ 2400n/mm2 - for power spring) for seat belt, clock and vacuum cleaner spring. We already developed and tested the item with posco We are sure that you will be satisfied with our quality. ** thickness for power spring : 0.10mm ~0.40mm ** width : 7mm ~ 290mm ** t/s : min 2, 000n/mm2 ** thickness for gerneral application : 0.50mm ~ 1.70mm ** width : 30mm ~ 400mm ** soft tempered : hv190 max, hard tempered : hv260 max
Steel strip
Narrow cold rolled steel strips
Hot Rolled Steel Strip Specifications: 1) Thickness:1.5-5mm 2) Width: less than 720mm 3) Steel Grade: Q195, Q215, Q235, SPHC, SPHD, 08AL, SS300, SS400, SAE1006, SAE1008, S235JR 4) Internal Diameter: 508mm, or 610mm 5) Coil Weight: usually 2~8 tons per roll, we can produce as per customer's requests 6) Thickness tolerance: +/- 0.18mm 7) Width tolerance: +/- 0.5mm 8) Packaging: Standard export packing Standard Export Seaworthy Packing
Galvanized steel Prime cold rolled galvanized steel sheet in coils: Thickness :(0.23-1.2)mm, width 1000mm/1200mm/1250mm, Specification: jis g3302 sgcc Prime cold rolled galvanized steel strips in coils Size:(0.23-0.4)mmx(32-450)mmxc , (0.4-2.0)mmx(32-650)mmxc Specification: q195 Zinc coating: z08 and up Seaworthy package
Steel strips As per buyer's requirements
Hot rolled steel strips:material:q195.Q195l.Q215.Q235 width:145mm-355mm, thickness:2.5mm-4.0mm, output:1200000mt per year, standard:gb/t 3524-2005. Cold roll steel strip :material:q195.Q195l Width:27mm-520mm Thickness:0.3mm-2.0mm Output:300000mt per year Tolerance:width +/-0.2mm thickness +/- 0.015mm
Hr strips Commodity: hot rolled strips Grade: q195, q215, q235 Size(mm) : 1.5-2.0*174-183*c, or 2.5and above*145-204*c Quantity(mt): 1000-2000 Price: usd393/mt , or usd415/mt fob, subjected to final comfirmation Mill standard export packing
Item Specification Materials: Cold rolled steel strips slit edge, non-skinpassed Size: 0.6-1.5 mmf-323 mm max Grade: Q195 black surface finish or bright surface finish Coil weight: 400kgs min each coil. 2 - 4mt per pallet Coil id: 500-580 mm Thickness tolerance: +/-0.02 mm Mill's standard export packing by pallets
Hardened & tempered strip steel Dimension (mm) Thickness 0.3mm to 2.5mm Width : 2.8mm to 260mm The strips are careful packed on skids in corrugated board boxes or wooden boxes and strapped with steel band.
Plastic clad steel strip
Spring steel strips We make this strips in c55, c65, c75, c80 grades Surface finish we can offer is grey, bright, blue, golden Edges we can offer is slitted , deburred, rounded Depends on size
Steel strap in seawoorthy packing
With enriched industrial experience and knowledge, we are providing an excellent range of Mild Steel Strip.
1. PRODUCT OVERVIEW VHR steel strip-seal joint made by Vinh Hung Investment and Production Co., Ltd (Vinh Hung IP) comprises of two steel rails with anchor bars connected to embedded bars in the pier cap of headwall of abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrink mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joint identified by the cross section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2. PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movements if any. Simple in design and installation, high load capacity and durability. Designed suitably for flush curb and central reverse. Totally water-tight. To ensure the long-lasting durability, VHR steel strip expansion joints are protected from corrosion with methods such as: 2-component epoxy coating, PU-based painting (Polyurethane), hot dip galvanization according to ASTM A123 standards and especially the Al â?? Mg spraying method (at the ratio of 5% Al and 95% Mg) which ensures anti-corrosion durability of up to 100 years, proven by salt-spraying test in 6000 hours (8-hour dry-wet cycle repetition) under ASTM B117 standards. MATERIAL PARAMETERS 1. PROPERTIES OF METAL ELEMENTS ITEMS Tensile strength, min Yield strength, min Elongation, min NO. 1 2 3 REQUIREMENTS 450 345 23 UNIT MPa MPa % STANDARD ASTM A709M PROPERTIES OF RUBBER SEAL UNIT REQUIREMENTS Point Mpa 1 2 3 4 5 Hardness Tensile strength, min Ozone resistance, content of ozone in the air 100pphm, 20% deformed at 40o C x 70h Elongation at break, min Hot air aging test in 70 hours at 100o C Tensile strength change, max Elongation change, max Hardness change 65 ± 5 7 No crack 250 - 20 - 40 0 - 15 STANDARD ASTM D2240 ASTM D412 ASTM D1149 ASTM D412 ASTM D573 ASTM D573 ASTM D573 ASTM D573 Installation of joints is critical to ensure the lifespan of the expansion joint and smooth traffic. Careful preparation of machinery, equipment, and highly specialized human resources is required for the installation of high quality expansion joints. The installation method shall be strictly followed to guarantee the actual performance of the product in service. 1. After finishing pavement, cut and clean he trend, adjust embedded bars, laym reinforcement bars on site 2 . Fix the deformed bars, install the fabricated joints, add distribution bars, anchoring bars to embedded bars. 3. Cure concrete, install rubber seal, allow traffic when concrete 4. Install formworks and pour non-shrink mortar or high-strength concrete to transition section, check the leveling of surface.
We offer cold rolled hardened and tempered steel strips in various grade and specifications. do let us know your requirement.