Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance.
Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries.
Production process:
The first stage: pickling and decontamination of the whole roll of strip steel to make the surface bright and clean.
The second stage: after pickling, it is cleaned in ammonium chloride or zinc chloride aqueous solution or mixed ammonium chloride and zinc chloride aqueous solution tank, and then sent to the hot dip tank for galvanizing.
The third stage: after the strip steel is galvanized, it is rolled up and put into storage. The galvanized layer can generally not be less than 500g/m2 according to the customer's needs, and any sample shall not be less than 480g/m2.
Post treatment of galvanized strip steel includes passivation, pre phosphating and oiling. First of all, passivation treatment should be carried out on the galvanized strip steel, which can improve the surface structure and luster of the zinc coating, improve the corrosion resistance and service life of the zinc coating, and improve the adhesion between the coating and the base metal.
Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance.
DX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc.
Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries.
* Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance.
* DX51D galvanized sheet material is a non-ferrous alloy mainly composed of zinc as the matrix and other elements. The main alloy elements are aluminum, copper, magnesium, etc. Zinc alloy has low melting point, good fluidity, easy plastic processing and welding, and is resistant to atmospheric corrosion. According to the manufacturing process, it can be divided into cast zinc alloy and deformed zinc alloy. The commonly used cast zinc alloy is zinc aluminum copper magnesium alloy. Its casting process performance is good, and the cooling rate has little impact on the mechanical properties. It is mainly used to manufacture mechanical parts, toys, decorations, household appliances, etc.
* Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries.
* Galvanized strip steel is a kind of raw material called (zinc), which is used to coat the long and narrow strip steel which is cold-rolled or hot-rolled to varying degrees. Hot dip galvanizing has the advantages of even coating, strong adhesion and long service life. Complex physical and chemical reactions occur between the hot-dip galvanized steel pipe substrate and the molten plating solution, forming a corrosion resistant zinc iron alloy layer with compact structure. The alloy layer is integrated with the pure zinc layer and the strip steel matrix. Therefore, it has strong corrosion resistance.
Use of galvanized strip steel: strip steel is widely used in the production of welded steel pipes, as the blank of cold bending section steel, and in the manufacture of bicycle frames, rims, clamps, washers, spring blades, saw blades, hardware products and blades. The use of high hot dip galvanized strip steel is naturally associated with the application of galvanized strip steel in construction, light industry, automobile, agriculture, animal husbandry, fishery, commerce and other industries.
Processing Service : Bending, Welding, Decoiling, Cutting, Punching, Welding
Invoicing : by actual weight
Delivery Time : 7-15 days
Technique : Hot Rolled Based, Cold Rolled
Port:
Tianjin Qingdao or according to your requirement
Packaging Details : in bundles, in bulk, customized packing.
Production process:
The first stage: pickling and decontamination of the whole roll of strip steel to make the surface bright and clean.
The second stage: after pickling, it is cleaned in ammonium chloride or zinc chloride aqueous solution or mixed ammonium chloride and zinc chloride aqueous solution tank, and then sent to the hot dip tank for galvanizing.
The third stage: after the strip steel is galvanized, it is rolled up and put into storage. The galvanized layer can generally not be less than 500g/m2 according to the customer's needs, and any sample shall not be less than 480g/m2.
StandardASTMROSHAISIDINENGBJIS
LengthCustomized
Thickness 005300mm
Width Customized
Surface 2BBANO3NO4HLNO1Mirror
Material 3040Cr18Ni9A182F304SUSF30414301
Hardness 14H12H34HHO
Chemical Composition
Grade C Si Mn P S Ni Cr Mo Cu N Ti
SUS304 008
100
200
0045
0030
80100 1820
Mechanical Properties
Grade State Hardness HV Yield Strength Tensile Strength Enlongation
SUS304 ANN 200
205
520
40
14H 200250 225
550
35
12H 250310 470
780
6
34H 310370 665
930
3
H 370430 880
1130
Surfce Finish Definition Application
2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster
Medical equipmentFood industryConstruction materialKitchen utensils
BA Those processed with bright heat treament after cold rolling
Kitchen utensilsElectric equipmentBuilding construction
NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001
Kitchen utensilsBuilding construction
NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
Kitchen utensilsBuilding constructionMedical equipment
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
Building construction
NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling
Chemical tankpipe
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Product Specification and Steel Grade
ASTM
JIS AISI EN Mill\'s Standard
S30100
SUS301
301
1.4310
S44500
SUS430J1L
- -
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
Cold Rolled Strip Available Size
Width: 4.0~609.6 mm
Thickness: 0.1~3.0 mm
Available Steel Grade: 201, 202, 204 Cu3, 301, 304, 304L, 310S, 316L, 321, 409L, 410S, 420J2, 430, 439, 441, 444, 445
Surface Finish: 2B, 2D, BA, No.3, No.4, No.5, SB, HL
Tolerance of Width
W < 100 mm
100 mm �?�?�?�¢?�?�?�?�¦ W < 1000 mm
�?�??�?�?�?�± 0.10 mm
Grade C Si Mn P S Ni Cr Mo Cu N Ti
SUS301 015
100
200
0045
0030
6080 1618 025
Mechanical Properties
Grade State Hardness HV Yield Strength Tensile Strength Enlongation
SUS301 ANN 250
205
520
40
14H 250310 470
780
35
12H 310370 510
930
10
34H 370430 745
1130
5
H 430490 1030
1320
3
EN 490550
1275
1570
Surface Finish
Surface Finish Definition Application
2B Those finishedafter cold rollingby heat treatmentpicking or other equivalent treatment and lastly by cold rolling to given appropriate luster
Medical equipmentFood industryConstruction materialKitchen utensils
BA Those processed with bright heat treament after cold rolling
Kitchen utensilsElectric equipmentBuilding construction
NO3 Those finished by polishing with No100 to No120 abrasives specified in JIS R6001
Kitchen utensilsBuilding construction
NO4 Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
Kitchen utensilsBuilding constructionMedical equipment
HL Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size
Building construction
NO1 The surface finished by heat treatment and picking or processes corresponding there to after hot rolling
Chemical tankpipe
430 Stainless Steel Strip Specifications
Grade: 430
Standard: ASTM/EN/JIS
Thickness: 0.03mm-5.0 mm
Width: 8.5mm-600 mm
Length: coil type or it can be produced as customer requirements
Surface Finish: NO.1, 2B, 2H(Rerolled Bright), BA, No.4, 8K (Mirror), HL (Hairline), Polishing Bright, etc
Edge: Mill Edge, Slit Edge, Deburred Edge, Round Edge, V Type Edge
430 Stainless Steel Strip Introductions
430 stainless steel strip is a general purpose stainless steel with good corrosion resistance.
It has better thermal conductivity than austenite grade stainless steel strip, a smaller thermal expansion coefficient than austenite strip, heat fatigue resistance.
Due to addition of stabilizing element titanium, it has good mechanical properties of welding.
Because of its chromium content, it is also called 18/0 or 18-0. Compared with 18/8 and 18/10, it contains slightly less chromium, and the hardness is correspondingly lower.
430 Stainless Steel Strip Applications
430 stainless steel strip is widely used for building decoration, fuel heating parts, hot water supply systems, household appliances, banding systems, home appliance parts and hareware.
430 Stainless Steel Strip Chemical Composition
The chemical components of grade 430 stainless steel strip is summarized in the following table:
Grade Standard C Si Mn P S Cr Ni Mo
430 ASTM A240 0.12 0.75 1.00 0.040 0.030 16.00-18.00 0.75
Stainless Steel Strip
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
Stainless Steel Strip
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
Stainless Steel Strip
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
Stainless Steel Strip
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
Stainless Steel Strip
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
Stainless Steel Strip
The properties of stainless steel are corrosion resistance, high ductility, attractive appearance and low maintenance.
Stainless steel contains chromium which provides the properties of corrosion resistance at high temperatures. Stainless steel can withstand corrosive or chemical environments due to its smooth surface. Stainless steel products are safe for long-term use with excellent resistance of corrosion fatigue.
Other specifications are also available up to request
Hot Rolled Strip Available Size
Width: 16.0~609.6 mm
Thickness: 2.5~10.0 mm
Available Steel Grade: 304, 304L, 316L
Surface Finish: No.1
65Mn CK67 high carbon cold rolled spring steel strip
Hardened and Tempered Steel Strip
Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties
Standard AISI, ASTM, BS, DIN, GB, JIS
Place of Origin China
Material Hot Rolled
Surface Polished
Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade
Brand Name HENSON
Width 2.0mm-300.0mm
Length Customize
Tolerance +/-10%
Hardness 40-55HRC
Surface nature, blue, yellow, white, polish
Edge Slit,Round,Square
MOQ 1000KGS
Tolerance thickness+/-0.01mm max,width +/-0.05mm max
Type strip,coil,sheet
Coil ID 300-500 mm
Tensile Strength 540-1575N/mm2
Yield Strength 370-1475N/mm2
1346 Steel Strips Suppliers
Short on time? Let Steel Strips sellers contact you.
