Offer: ASTM A202 Grade A|A202GRA|ASTM A202 GradeB|A202GRB Pressure Vessel Steel Sheet Steel Name: ASTM GradeA|A202GRA|ASTM A202 GradeB|A202GRB|Boiler steel plate Main Application: ASTM A202 Grade A|A202GRA|ASTM A202 GradeB|A202GRB| Pressure Vessel And Boiler Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project. Steel Standard: ASTM A202/A202M ASTM A20/A20M Rolling Size: Thickness*Width*Length 5-200mm*1220-4200mm*5000-18000mm Notes: 1.Payment Item: T/T,L/C 2.Trade Terms:CIF,FOB,CFR,CNF 3.Delivery Time: 10-30days 4.Heat Treatment: AR,TMCP,N,Q+T, 5:Steel Services: UT ,Charpy V-Notch Impact Test,HIC test, NDT , PWHT,NACE0175 ,The Third Party Test (Such as SGS Test),Cutting, Coated or Shot Blasting and Painting, Z Direction Test
Supply:ASTM A299 GRA,A299 GradeA Steel Plate,A299 GradeB Pressure Vessel And Boiler Steel Sheet Steel Name:ASTM A299 GradeA,A299 GRA,A299 GRB, Boiler steel plate,Storage Tanks Steel Sheet. Main Application: ASTM A299 Grade A,A299 GRA,A299 GRB,Heat Exchanger Steel Plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project. Steel Standard:ASTM A299 /A299M ASTM A20/A20M Rolling Size: Thickness*Width*Length 5-200mm*1220-4200mm*5000-18000mm Notes: 1.Payment Item: T/T,L/C 2.Trade Terms:CIF,FOB,CFR,CNF 3.Delivery Time: 10-30days 4.Heat Treatment: AR,TMCP,N,Q+T, 5:Steel Services: UT ,Charpy V-Notch Impact Test,HIC test, NDT , PWHT,NACE0175 ,The Third Party Test ,Cutting, Coated or Shot Blasting and Painting, Z Direction Test
Offer: ASTM A302 GRA|A302 GRB|A302 GRC|A302 GRD|Steel Plate|Pressure Steel Sheet Steel Name: ASTM A302 GRA|A302 GRB|A302 GRC|A302 GRD|A203 GradeA|Boiler steel plate Main Application: ASTM A302GRA|A302GRB|ASTM GradeC|A302GRD|Storage Tanks Steel plate are used in Pressure Vessel,Boiler,Storage Tanks and Heat Exchanger in Oil,Gas Project. Steel Standard:ASTM A302 /A302M ASTM A20/A20M Rolling Size: Thickness*Width*Length 5-200mm*1220-4200mm*5000-18000mm Notes: 1.Payment Item: T/T,L/C 2.Trade Terms:CIF,FOB,CFR,CNF 3.Delivery Time: 10-30days 4.Heat Treatment: AR,TMCP,N,Q+T, 5:Steel Services: UT ,Charpy V-Notch Impact Test,HIC test, NDT , PWHT,NACE0175 ,The Third Party Test (Such as SGS Test),Cutting, Coated or Shot Blasting and Painting,Z Direction Test.
The trapezoidal sheets leb -deck 920, 1000, 1060 and the leb tile used in roof coverings and wall covering buildings in single sheets or in the form of composite construction with two sheets and some form of insulation (e.G., wool, polystyrene, etc.) there between them. The leb-deck 1000 may be combined perfectly in the same construction as leb cover panels. On curves coatings will special calculation must be made whether the sheets can follow the curvature of the building. The trapezoidal leb-deck sheets are manufactured in galvanized steel, aluzinc or prepainted. The metal tile leb tile can be perfectly combined in the same construction as the leb tile panel and leb tile panel delux which is actually the outer sheet of the leb tile panel.
we supply and export of high quality steel fasteners like nuts, bolts, washer, screws.
Provide:GL-A|shipbuilding-offshore-steel-sheets|steel-plate. GL-A|is mainly used to Ship Project and Ocean Offshore Structural Project. 1.Grade:GL-A|steel-plate 2.Steel standard:GL,GL Rules or LR,BV,NK,RINA,KR,ABS. 3:Rolling Size:Thickness*Width*Length 3-200mm*1220-4200mm*5000-18000mm 4:Additional Condition: UT (Ultrasonic examination),AR(As Hot Rolled only),TMCP(Thermal Mechanical Control Processing), N(Normalized),Q+T(Quenched and Tempered),Z Direction Test(Z15,Z25,Z35) , Charpy V-Notch Impact Test,The Third Party Test (such as SGS Test), Coated or Shot Blasting and Painting 5:Trading terms:CIF,CNF,FOB,CFR 6:Delivery time:7-30 days 7.Payment:T/T,L/C
Dnv d500-dnv d550 shipbuilding-offshore-steel-sheets|steel-plate is mainly used to ship project and ocean offshore structural project. 1.Steel grade:dnv d500-dnv d550 2:steel standard:dnv or dnv rules or gl, rina 3:rolling size:thickness*width*length 3-200mm*1220-4200mm*5000-18000mm 4.Heat treatment:tmcp(thermal mechanical control processing), n(normalized), q+t(quenched and tempered) 5:steel services:ut (ultrasonic examination), ar(as hot rolled only), z direction test(z15, z25, z35) , Charpy v-notch impact test, the third party test (such as sgs test), coated or shot blasting and painting. 7:trading terms:cif, cnf, fob, cfr 8:delivery time:7-30 days 9:payment:t/t, l/c Henan hzz iron and steel co.Ltd is the largest agent of hbis. It had cooperate with shouqin mill, tang mill, Wuyang mill more than twenty years. At the same time, there are 32 steel warehouse in zhengzhou, anyang, wuxi, kunshan, Tianjin, shanghai, nanjing and jinan city. And support welding, shot blasting, painting and other relevant machining work.
Provide abs-dh36-shipbuilding-offshore-steel-sheets|steel-plate. Abs-dh36-shipbuilding-offshore-steel-sheets|steel-plate is mainly used to ship project and ocean offshore structural project. 1.Steel grade:abs dh36-steel-sheets 2:steel standard:abs or absrules|bv, nk, kr, rina, gl 3:rolling size:thickness*width*length 3-200mm*1220-4200mm*5000-18000mm 4.Heat treatment:tmcp(thermal mechanical control processing), n(normalized), q+t(quenched and tempered) 5:steel services:ut (ultrasonic examination), ar(as hot rolled only), z direction test(z15, z25, z35) , Charpy v-notch impact test, the third party test (such as sgs test), coated or shot blasting and painting. 6:chemical composition: C:0.18 mn=0.90-1.60 si:0.10-0.50 p:0.035 s:0.035 7:mechanical property: Tensile strength(mpa):400-590 yield strength(mpa):315 % elongation in 2 in.(50mm) min:22 8:trading terms:cif, cnf, fob, cfr 9:delivery time:7-30 days 10:payment:t/t, l/c Henan hzz iron and steel co.Ltd is the largest agent of hbis. It had cooperate with shouqin mill, tang mill, Wuyang mill more than twenty years. At the same time, there are 32 steel warehouse in zhengzhou, anyang, wuxi, kunshan, Tianjin, shanghai, nanjing and jinan city. And support welding, shot blasting, painting and other relevant machining work. -
Standard: ASTM, AISI,GB,JIS,DIN, Thickness:0.08-20 mm Width:less than or equal to 3000 mm Length:sheet,belt or custom made according to client’s demands Mirror surface finishing grade:No.8, Super No.8 Surface roughness:Ra 0.007-0.03 um Certificate:the third party testing, SGS, ITS, BV PVD coating: 80-300nm (film thickness) PVD coated film hardness: HV2000-4000 Application: Architectural decoration,Furniture decoration ,Kitchen decoration,Elevator decoration.
Standard:Astm, jis, gb, aisi, din, bs Grade Sgcc. Sgch. Dx51d. Jis g3302 Certification: Iso, sgs, iso9001:2008, sai, bv, sgs, ciq Audited certificates: Bv, sgs, iso, ciq Type Steel coil Zinc coating 40-275g/m2 Coil id 508mm/610mm Coil weight: 3-5 mt Spangle: Zero, mini, regular, big, skin pass Edge: Mill edge Technique Cold rolled Surface treatment Galvanized Thickness: 0.125mm-0.8mm, Width:750mm-1250mm Coil id 508mm/610mm Coil weight: 3-5 mt
Hot-Rolled Sheet Metal is obtained after the rolling process at a temperature above the recrystallization temperature of the steel 1700 F and above
Standards ASTM / ASME A240 / SA240 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching. Finish Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
Standards ASTM / ASME A240 / SA240 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching. Finish Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
Standards ASTM / ASME B575, B333, B435 / SB575, SB333, SB435 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Standards ASTM / ASME B409 / SB409 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Standards ASTM / ASME B463 / SB463 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Standards ASTM / ASME B127 / SB127, AMS 4544, DIN 17750, BS 3072NA1, BS 3076NA13 Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Finish Hot rolled (HR), Cold rolled (CR) Form Coils, Foils, Rolls, Plain Sheet, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Thickness 0.1mm to 12 mm Thk Sheet/Plate Size 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm Coil Width 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc. Coil Length 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc. Surface 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching. Finish Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
Steel Sheet, Blanks & Coil For Transportation The transportation industry encompasses a wide range of different vehicles and modes of transportation that get from point A to point B. This can include public transportation, trains, buses, airplanes, semi-trailer trucks, and more. Hunter Special Steel is an experienced supplier that has been supplying steel to the transportation industry for many years, ensuring that we have exactly what you need. Contact us today. Steel Plates for Transportation A wide range of different processes, grades and shapes of steel are available for the transportation industry. We can provide the following services: Types of steel processed Hot rolled pickled and oiled coils Cold rolled coils Hot-dip galvanized Steel grades Duplex Duplex Advanced High Strength Steels Ultra High Strength Steels Multi-Phase High Strength Low Alloy Steels Shapes Steel plate Coil Blanks Fine Blanking Configuration Blank
Cold Rolled Carbon Steel Sheets Cold rolled carbon steel is hot rolled steel that has been further processed. Hot-rolled steel is cooled (usually to or below its recrystallization point), then annealed and re-rolled at room temperature to obtain more accurate thicknesses, higher strength and hardness, and better surface quality. In addition to changing mechanical properties, the cold rolling process produces steel with tighter tolerances and higher dimensional accuracy than hot rolled steel. It also tends to be better suited to lighter gauges and is better suited to applications that require a more visually appealing surface finish. Types of Cold Rolled Carbon Steel Cold rolled carbon steel is available in a variety of carbon content levels: Low carbon steel - also known as soft steel, contains less than 0.3% carbon. It is highly formable, making it effective for applications that require a lot of bending and forming. Medium Carbon Steel - Carbon content ranges from 0.3% to 0.6%, which makes it stronger and more durable for applications such as automotive manufacturing. High-carbon steel - contains 0.61% to 1.5% carbon, which significantly alters its physical properties. With higher carbon content, the steel becomes stronger and harder than mild steel; however, this material is less ductile.
