INCONEL 22 is extremely resistant to water and general corrosion, crevice corrosion, intergranular attack, pitting and stress corrosion cracking, tough and versatile even at high temperatures. A nickel base with 22% chromium, Inconel 22 is completely austenitic. This means it is non-magnetic and will not harden with heat treatment. Nickel also helps protect the alloy from corrosion by halides such as chloride and fluoride when subjected to extreme heat. In addition to nickel and chromium, Inconel 22 contains 14% molybdenum and 3% tungsten. These two metals make the alloy resistant to wet reducing media such as iron, copper salts and nitric acid. Combined with chromium's resistance to wet oxidizing media such as iron salts, copper salts and nitric acid, this makes Inconel 22 particularly suitable for use in highly corrosive environments where safety is paramount.
American standard designation: UNS N06022, Specifications: ASTM B564, ASTM B574, ASTM B462, ASTM B335, ASTM B622, ASTM B626, ASTM B366, ASTM B574, ASTM B622, ASTM B619, ASTM B775, ASTM B462, ASTM B564, ASTM B472, ASTM B775, ASTM B829.
German standard designation: W.Nr. 2.4602, Specifications: DIN 17744, DIN 17750, DIN 17751, DIN 17752, DIN 17754.
Japanese standard designation: JIS NW6022, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907.
Chinese standard designation: GH3030, Specifications: GB/T 15007, GB/T 15008, GB/T 15009, GB/T 15010, GB/T 15011, GB/T 15012.
We can provide the following the form:Inconel22 alloy coil; Inconel22 alloy strip;Inconel22 alloy plate; Inconel22 alloy sheets; Inconel22 alloy tube; Inconel22 alloy pipe;
Inconel22 alloy flat; Inconel22 alloy bar
GB:GH3030;JIS:NW6022;UNS:N06022;W.Nr:2.4602
Pollution control (flue gas desulfurization), waste treatment, power generation, pulp and paper processing, marine applications, and chemical and petrochemical processing.
Steel Deck is used as composite floor system. The steel deck profile sheet has a ribbed profile with embossment to interlock with concrete slabs, creating a reinforced concrete slab that serves dual purpose of permanent form and positive reinforcement.
Deck profile sheet is offered in Zinc coated and precoated steel, zinc ranging from 120 to 275 gsm which gives better resistance against corrosion.
Steel Deck is widely used in multi-storey buildings. Storage facilities, industrial sheds, shopping malls, ware houses.
Specification
Galvalume as per IS 15965 or equivalent grades like ASTM A 792, AS 1397, EN10147/EN10142/DIN 17162/JIS G3302/ASTM A653
Thickness (mm)
0.15 to 1.6
Width(mm)
100 -1500
Coating
Acrylic coating (Hexavalent /Trivalent), Antifinger Print
Yield strength (MPA)
240,340 ,550.
Temper
Soft /Hard /Extra Soft
Coil weight (MT)
3-20 Max
Al- Zn Coating
AZ 40-AZ 150
Sheet piles are used in foundation and construction projects, both in tertiary and marine contexts, to form a wall that is either earth or watertight. Applications often pertain to retaining walls, cofferdams, bulkheads, and seawalls.
SGA rolls are widely used in intermediate stands and finishing stands, due to it's stable quality, and better strength, toughness and wear resistance. In normal steel rolling process, it has no rolling accident, no breakage, in most of severe situation, mills used for replacing AIC rolls.
Material C Si Mn Cr Ni Mo
SGAâ? 2.90~3.60 1.20~2.20 0.20~0.80 0.20~1.00 3.01~3.50 0.50~1.00
SGAâ?¡ 2.90~3.60 1.00~2.00 0.20~0.80 0.30~1.50 3.51~4.50 0.50~1.00
Adamite is a material that has both high strength and toughness of cast steel and good wear-resistance and hardness of cast iron. Due to its alloy elements such as Si, Ni, Cr, Mo etc, and some amount of carbides in the matrix, through a certain of special heat treatment technology, making it has a good wear-resistance and toughness. AD roll also has small amount of hardness drop and deep cutting depth.
These kind of rolls are mainly for grain and oil, foodstuff, with special alloy content in white iron and grey iron, makes it good for applications, our manufacturer has participated in grain rolls standard drafts and compiles, which has good experience and high cost performance.
1, Cold Rolled Steel Sheet Metal Parts have been available for many, many years, and have been successfully used for a multitude of applications. Today's Cold Rolled Steel Sheet Metal Parts are much improved over those used in the past. They offer better control of thickness, shape, width, surface finish, and other special quality features that compliment the emerging need for highly engineered end use applications.
2.Product Feature for Cold Rolled Steel Sheet Metal Parts
A.Strength: Cold rolled steel is 20% stronger than hot rolled steel
B,High-quality finish
C,Cold rolled steel has a tighter tolerance, meaning it can be rolled thinner by up to 50%
3.Product Details for Cold Rolled Steel Sheet Metal Parts
Shbury offers a variety of cold rolled steel sheet metal products and value-added services to meet customer needs. Shbury cold rolled steel service capabilities include slitting, shearing, blanking, leveling, degreasing and brushing and metallurgical support.
Cold rolled steel is rolled at room temperature, below its recrystallization temperature, which enables better control over finished product shape, thickness, dimensions and surface finish.
1, Galvanized steel sheet metal bending parts or galvanealed steel, which is galvanized then annealed.
Galvanization is the process of applying a protective zinc coating to steel in order to prevent rust and corrosion. Annealing is a heat treatment process that alters the microstructure of a material to change its mechanical or electrical properties, typically reducing the hardness and increasing the ductility for easier fabrication.
2.Product Feature for Galvanized Steel Sheet Metal Bending Parts
3.Product Details for Galvanized Steel Sheet Metal Bending Parts
Why Galvanized Steel Sheet Metal Bending Parts?
Depending on the application, sheet metal offers advantages, not just over non-metal alternatives but over other types of metal fabrication as well. Compared to machining, it generally has a significantly lower material cost.
Rather than starting with a block of material, much of which will be machined away, sheet metal lets you buy what you need and use what you need. The remainder of a metal sheet is still usable, while swarf the shavings removed in machining must be recycled.
Hot Rolled Steel in Sheets
Sizes : Min 1,00 Mm & Max 25.00 Mm
Width : Min 900 Mm & Max 1250 Mm
Length : Min 1000 Mm & Max 6000 Mm
Qualities : S235jr / S275jr / S355jr / Dd11 / Dd12 / S420mc / S315mc / S355mc / S500mc
Grade : Acc to En10025-2004 Type (3.1) / en 10025-2 / en 10051
6167 Steel Sheets Suppliers
Short on time? Let Steel Sheets sellers contact you.
