Carbon steel seamless pipe is a kind of long steel with hollow cross section and no joint around. It has a hollow cross section, a large number of used for conveying fluid pipelines, such as conveying oil, natural gas, gas, water and some solid materials pipelines. Compared with solid steel such as round steel, carbon steel seamless pipe has the same bending and torsional strength and is light in weight. It is an economic cross-section steel, widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipe, automobile drive shaft, bicycle frame and steel scaffolding used in construction, etc. Product name: Line line, Seamless steel pipe API 5L; Standard: API 5L PSL2; Grades: B, X42, X52, X56, X60, X65, X70 and S (S for sour service, for example X70QS or NS); Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless; Wall thickness: SCH 10, SCH 20, SCH 30, SCH 40, STD, XS, SCH 60, SCH 80, SCH 100, SCH120, SCH160, XXS; Length Range: 20 FT (6 meter), 40FT (12 meter)or customized; Ends Type: Beveled ends, Plain ends; End Protection: plastic Caps or iron Caps; Surface Coatings: Natural, Varnished, Black painting, 3PP, FBE and 3PE, Cladding and Lined etc.
Carbon seamless steel pipe is made by perforating ingot or solid tube billet and then hot rolling, cold rolling or cold drawing. Carbon seamless steel pipe occupies an important position in Chinese steel pipe industry. Carbon seamless steel pipes transport water, oil, gas or other chemical fluids. The performance of� seamless steel pipe� is very good, and it has a wide range of applications, and has good corrosion resistance, practicability is indeed guaranteed, and the service life is also very long. Moreover, many construction parties need to purchase steel pipes in large quantities. Material: GR.B,ST52, ST35, ST42, ST45,X42, X46, X52, X56, X60, X65, X70,SS304. Standard: API5L , ASTM A106 Gr.B, ASTM A53 Gr.B,ANSI A210-1996, ANSI B36.10M-2004 , ASTM A1020-2002,ASTM A179-1990 ,BS 3059-2,DIN 17175 ,DIN 1630 ,DIN 2448. Certificates: ISO 9001:2008, SGS,. Dimensional specification: ANSI/ASME B36.19M, ANSI/ASME B36.10M. Size: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless. . Length Range: 20 FT (6 meter), 40FT (12 meter)or customized. End Protection: plastic Caps or iron Caps. Surface Coatings: Natural, Black painting, 3PP, 3PE and FBE, Cladding and Lined etc. Shapes: Round, Rectangle. Schedule Thickness Range: SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS. Packaging: Loose package; Packaged in bundles(2Ton Max); bundled pipes with two slings at the both end for easy loading and discharging.
Steel Line Pipe API 5L supply scope: Standard: API SPEC 5L 2018. Grades: API 5L X52NS. Steel Pipe Dimensions: 1/2 inch to 12 inch, 14 inch, 16 inch, 18 inch, 20 inch, and 24 inch for seamless. Wall Thickness: SCH 10. SCH 20, SCH 40, SCH STD, SCH 80, SCH XS, to SCH 160 Ends Type: Beveled ends, Plain ends Length Range: 20 FT (6 meter), 40FT (12 meter)or customized End Protection: plastic Caps or iron Caps. Surface: Natural, Varnished, Black painting, FBE and 3PE, Cladding and Lined etc
DIN 2448 ST37 Pipes Manufacturers in Mumbai, DIN 2448 ST37 Pipes Suppliers in Mumbai, DIN 2448 ST37 Pipes Stockists in Mumbai, DIN 2448 ST37 Pipes Exporters in Mumbai Specifications DIN 2448 is a standard that given for flawless carbon steel pipes and tubes including conventional clump per unit length, breadth, couplings in addition to weights. They are replaced by EN 10210, as the DIN 2448 Seamless Steel Tubes could be hot formed either with or minus the consequent heat treatment. DIN 1629 ST 37 Seamless Pipe equators are ranges between 11,3mm to about 108 mm with the wall consistence being up to 13,6mm in the case of cold drawn pipes. DIN 2391 ST 37 Steel Pipe closeness is checked , the steel grade needs to be subject to water testing at 7 Mpa. Grade of DIN 2448 ST 37 Seamless Steel Tubes is meant to be used for pressure and thermal purposes. Carbon brand grade line ST37.0 DIN1629 Hydraulic Pipe has good aspects at a specified room temperature. The DIN 2448 Seamless Steel Tubes is used in fair all sectors of prismatic sedulity. As variations are there in the types and sizes in DIN 2448 ST 52 Pipe, these Four square pipes will also be used in general purposes. This carbon sword specified Din 2448 ST52.3 sword pipe could be manufactured are worked either through the hot rolling process or it could be made through cold sketch. All Chhajed products are manufactured under strict process control and monitored throughout the production process. They go through several checks to ensure that the product delivered is of finest quality! Specification Schedule of DIN 2448 ST37 Pipes Standard Specification DIN 2391 EN 10305 ST 37 Codes and Standards ANSI, ASME, ASTM, API, SAE, BS, AGA, AWWA, ISO, DIN Dimensions ASME/ ANSI B36.10 / 19 Standard Size 1/2" NB to 36" NB (LSAW, SSAW, HSAW) Wall Thickness 3-12mm Pipes schedules SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH XS Producing techniques Seamless / ERW / Welded / Fabricated / CDW / EFW Available Shapes Round, Half Round, Square, Rectangular or Custom shape Length 3 to Max18 Meters or custom Pipe Ends Beveled End, Plain End, Treaded Test Certificate EN 10204 3.1 B Chemical Properties of DIN 2448 ST37 Pipes Country DIN/EN Steel Grade (Steel number) C Mn P S N Cu Thickness (d) (mm) Method of deoxidation Germany DIN 17100: 1980 St37-2 (1.0037) 0.17 0.050 0.050 0.009 16 Optional 0.20 16
We are in a strong Position to Supply you Hot Rolled Steel Sheets Direct from Chinese Factory CIF Price for European and Asian Sea Ports :------- 0,4mm @ USD: 820 /TON CIF your European Sea Port 0,8mm @ USD: 780 /TON 1,0mm @ USD : 770 /TON 2,5mm @ USD 785 /TON 3mm @ USD: 820 /TON 4mm @ USD: 720 /TON PACKING : 28 MT in 20 Foot one Container. Payment is against L / C.
EN 10083-2 C45E Carbon Steel Pipes We are suppliers of piping and tubing material that are applicable in industry and construction purposes. EN 10083-2 C45 is a Euronorm Standards Quenched and tempered steels. It is one such variant that delivers different piping requirements in different industries and has proven its worth through its substantial quality and ability to be used in multiple applications. It is easy to spot and distinguish as it has a dull appearance similar to a matte finish. It looks like a cast iron pot and is not shiny. It composition is made of iron and carbon but it has more of carbon content and this higher carbon content gives it unique characteristics, which includes more malleability and durability. It also has a better heat distribution and lower melting point. All these features make it useful in a number of industries and has a number of commercial applications in different industrial sectors.
Chhajed Steel And Alloys Pvt Ltd is a provider of ASTM A672 Carbon Steel Gr CC65 Pipes. Our products are manufactured under strict process control and monitored throughout the production process. At Chhajed Steel & Alloy Pvt Ltd, we manufacture ASTM A672 CC65 specified pipe. Under the standard ASTM A671, the specification requirements are covered for electric fusion welded steel ASTM A671 Gr CC65 EFW Pipe. Welding operations can be carried out on this specified ASTM A671 CC65 Electric Fusion Welded Pipe with the addition of a filler metal. It is important to note that these steel grade ASTM A671 Gr CC65 Cl22 EFW Pipes have been designed to be used for applications involving not only atmospheric temperatures, but also for lower temperature environments.
Galvanised steel pipes, which are resistant to and all kinds of wear such as corrosion etc. compared to black pipes, are manufactured as pre-insulated to prevent heat loss when used in service water installations, fire hydrant lines and boiler lines.
The steel pipes used in the manufacturing of pre-insulated pipes are manufactured longitudinally welded (ERW) or spirally welded (SAW) in accordance with the norms required by the standard TS EN 253 or customer demands. Pipes comprise three basic materials. Carrier pipes are established as steel, copper or plastic based according to the properties of the carried fluids. Casing pipes are manufactured from high density polyethylene (HDPE) raw material, with UV resistance, 100% waterproof and with online corona. PUR ( POLYURETHANE INSULATION MATERIAL) that is injected between the carrier pipe and casing pipe provides heat insulation besides enabling two pipes operating as one pipe by bonding them together.
Unit Pipe Length 6 meter Size/Diameter 150mm Grade C Material Heavy Thickness 6mm Shape Round Brand Apollo Color Silver GI Pipes Galvanised Iron (GI) Pipes are manufactured using mild steel strips of Low Carbon Steel Coils. The strips are passed through a series of fin rolls to give them a circular shape. The slit ends of the strips are then welded together by continuo Additional Information: Delivery Time: 24 Hour
BS EN 10210 Pipe Factory: EN 10210-1, EN 10210-2, S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H Steel Pipe, Hot Finished, for Railway Station. Product: EN 10210-1/2 Structural Steel Pipe. Grade: S235JRH, S275JOH, S275J2H, S355JOH, S355J2H, S355K2H. Manufacturing process: Hot finished. Size ranges: Round pipe: O.D 21.3-1219 mm; Thickness: 2.3-25 mm. Square pipe: O.D 40*40 mm-400*400 mm; Thickness: 2.6-20 mm. Rectangular pipe: O.D 50*30-500*300 mm; Thickness: 2.6-23.5 mm. Application: Applied to bridge, railway station, airport, bus station. etc.
ASTM A52 ERW Pipe Company: Cold Drawn ERW Pipe, Hot Dip Galvanized, ASME SA52, ASTM A52, API, BS, DIN, JIS, 1/2-10 Inch, THK 0.5-16 mm, Brown Painting. Product: ASME SA52 ERW Galvanized Pipe. Thickness: 0.5-16 mm. Standard: API, ASTM, BS, DIN, JIS. Material: ASTM A52 or ASME SA52. Finish: Brown painting. Outer Diameter: 1/2-10 IN. Treatment: hot dip galvanized. Length: 5.8, 6 meters. Manufacturing: Cold Drawn.
ASTM B423 Alloy Steel Pipe Supplier: ASTM B423 UNS N08825, N08221, N06845 Steel Pipes, Seamless, OD 1/8-30IN, WT SCH 5S, 10S, 40S, 80S, Cold, Hot Finish. Product: ASTM B423 Alloy Steel Pipe. Grades: UNS N08825, N08221, and N06845. Outer Diameter: NPS 1/8-30IN. Wall Thickness: SCH 5S, 10S, 40S, 80S. Manufacturing: cold and hot finish. Application: Used for general corrosive service.
Types: Galvanized welded steel pipe, galvanized seamless steel pipe Materials: Carbon steel Connection type: threaded Size range:1/8³-36³ Schedule: sch40, sch80, sch120, sch160, XH, XXH Length of the galvanized tubes - in diameter 4 16 mm 6000 + 100 mm - in diameter 18 42 mm 6000 + 50 mm Tolerances of the zinc coated tubes - tolerances of the outside diameter: - diameter between 4 30 mm ±0,08 mm - diameter between 35 38 mm ±0,15 mm - diameter up to 42 mm ±0,20 mm - tolerances of the inside diameter are according to EN 10305-4 - tolerance of the wall thickness ± 10% The Steel grades for the zinc coated tubes E 235+N and E 355+N Building and structural material .Mechanical and general engineering purposes Manufacturing of Bus Body, Railway Boogies In Telephone department as Conduit Pipes Material Inspection (Steel Pipe) Hanging Degreasing Rinsing Pickling Washing Dipping Fluxing Hot Air Drying Inside and Outside Hot-dipped Galvanizing Blow Cooling Passive and Rising Unloading Inspection and Trimming Type Identification Packaging and Storing and Transportation Size: OD: 21.3mm ~ 610mm;WT: 0.5mm ~ 20mm;LENGTH: 0.3mtr ~ 18mtr, Ramdon Length, Fixed Length, SRL, DRL Standard & Grade: GB/T 3091 Q195/Q215/Q235/Q345, BS 1387, EN 39, EN 1139 S235JR/S275JR, ASTM A53 GR. A/B/C, JIS G3444 STK 400/STK 500 Ends: Square Cut/Threaded, Burr Removed
Size: OD: 13.72-4064mm / WT: 1.65-40mm,Length: 0.5mtr-20mtr Standard & Grade : API5L,ASTM A106/A53, DIN2391, ASTM A179/A192, EN10210,EN10208 Ends: Square Ends/Plain Ends (straight cut, saw cut, torch cut), Beveled/Threaded Ends Carbon steel pipe is used for conveying oil , gas and other fluids. Standard: API SPEC 5L,ISO 3183,ASTM A 53M,ASTM A 106M,JIS G 3454,JIS G 3455, JIS G 3456 Standard: API SPEC 5L,ISO 3183,ASTM A 53M,ASTM A 106M,JIS G 3454,JIS G 3455, JIS G 3456 Uses: For conveying gas, water and oil either in the oil or natural gas industries Dimension: SMLS: 10.3~1016 1.7~52mm WELD: 219~2134 5~52mm
Seamless boiler tube and pipe sizes OUTER DIAMETER (OD) 10,2 139,7 mm (from 26.9 mm manufactured as hot rolled) WALL THICKNESS (WT) 0,5 â?? 16,0 mm (from 2.6 mm manufactured as hot rolled) EUROPEAN STANDARDS EN 10216-2, DIN 2448, BS 3059-1, BS 3059-2, BS 3602-1, BS 3604-1, NF A 49-211, NF A 49-213, UNI 4991, STN a �?SN 42 5715, STN a �?SN 42 5716, PN-H 74252 RUSSIAN STANDARDS GOST 8732 AMERICAN STANDARDS ANSI B36.10, ASME B36.10 Steel grades for tubes intended for pressure equipment Steel for pressure equipment, used at higher temperatures â?? Boiler tubes EN 10216-2 P195GH, P235GH, P265GH, 16Mo3, 14MoV6-3, 7CrWVMoNb9-6, 7CrMoVTiB10-10, 10CrMo5-5, 13CrMo4-5, 10CrMo9-10, 25CrMo4, X11CrMo5+I, X11CrMo5+NT1, X11CrMo5+NT2, X10CrMoVNb9-1 ASTM A 106 Grade A, Grade B, Grade C ASTM A 209 Grade T1, Grade T1a, Grade T1b ASTM A 210 Grade A-1, Grade C ASTM A 556 Grade A2, Grade B2, Grade C2 ASTM A 335 Grade T/P11, Grade T/P12, Grade T/P22, Grade T/P24 ASTM A 213 Grade T/P11, Grade T/P12, Grade T/P22, Grade T/P24 Steel for tubes intended for pressure equipment EN 10216-1 P195TR1, P235TR1, P265TR1, P195TR2, P235TR2, P265TR2. ASTM A 53 Grade A, Grade B Steel for tubes made from fine-grained steel EN 10216-3 P355N, P460N, P355NH, P460NH, P275NL1, P355NL1, P460NL1, P275NL2, P355NL2, P460NL2. Steel tubes for low temperatures EN 10216-4 P215NL, P265NL. ASTM A/SA 333 (A999) Grade 1, 3, 6, 7 ASTM A/SA 334 (A1016) Grade 1, Grade 6 ASTM A/SA 524 (A530) Grade II Steel comparison according to DIN and EN standards. The fine-grained steels are supplied in 4 types of qualities. DIN 17179 Type Marking Steel grades Basic StE 255, 285, 355, 420, 460 High â?? temperature WStE 255, 285, 355, 420, 460 Low â?? temperature TStE 255, 285, 355, 420, 460 Low â?? temperature custom EStE 255, 285, 355, 420, 460 EN 10216 â?? 3 Marking Steel grades Basic P-N 355, 460 High temperature P-NH 355, 460 Low temperature P-NL1 275, 355, 460 Low temperature custom P-NL2 275, 355, 460
Welded ERW Mild Steel MS Pipe / ERW Pipes / Circular Hollow Section in various thickness & size. Size range:'' ~ 10, Thickness 1.2~9.0mm. Length: 6M, 12M or as requested. Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested. Grade: S195T / L275 / S275J0H or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
Welded ERW Galvanized Pipes or Galvanized Tubes in various thicknesses and size. Size range: up to 10, Thickness 1.2~9.0mm. Length: 6M, 12M or as requested. Spec: BSEN10255 / BSEN10219 / ASTM A500 or equivalent / as per requested. Grade: S195T / L275 / S275J0H or equivalent / as per requested. Note: Price is indicative only, please contact with us for further discussion on the final quotation.
ASTM A106 Carbon Steel Pipe For High Temperature ASTM A106 / ASME SA106 pipes are seamless carbon steel pipes used for high tempertaure applications (up to 750 degrees F). These pipes are widely used in the oil & gas, petrochemical, power generation and ship-building industries (examples: refineries, downstream plants, vessels. boilers and towers). A106 pipes are particulary suited whenever the trasported fluid has either high temperature or high pressure (or both combined). ASTM A106 / SA106 pipes are available in size range from 1/2 to 28 inches, and in pipe schedules from 10 to 160. These pipes are supplied either in single random lenght (17-24') or double random lenght (36 -44'). In terms of material grades, A106 pipes are manufactured in grade A, B and C. NPS 1-1/2? and below are available in the hot finished or by cold drawn type. Pipes of NPS 2 inch and above are generally are hot rolled manufatured. A106 pipes are produced out of killed steel. The chemical composition and Machanical Property of the three grades of ASTM A106 is shown in the following table: Chemical composition: Chemical composition, % Element C Mn P S Si Cr Cu Mo Ni V max max max min max max max max max A106 Grade A 0.25 0.27-0.93 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 A106 Grade B 0.30 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 A106 Grade C 0.35 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 Machanical Property: ASTM A106 pipe Grade A Grade B Grade C Tensile Strength, min., psi 48,000 60,000 70,000 Yield Strength, min., psi 30,000 35,000 40,000 Hdrostatic Test of A106 pipes: The hydrotest shall apply a pressure equal to 60% of the minimum yield strenght for at least 5 seconds at atmospheric conditions. The maximum pressure shall not exceed 2500 psi for pipes up to 3 inches, and 2800 for larger sizes. If additional, non standard, tests are executed, the pipe shall bear an "S" mark on each lenght or pipe bundle. Pipe marking:Each lenght of pipe (or bundle for smaller diameters) shall have the following markings applied: Manufacturer name Material grade(ASTM A106 A / B / C ) Diameter and ANSI schedule (from 10 to 160 and XXS) Pipe lenght Heat number Hydrostatic test pressure or NDE Weight / foot
ASTM A106 Carbon Steel Pipe For High Temperature ASTM A106 / ASME SA106 pipes are seamless carbon steel pipes used for high tempertaure applications (up to 750 degrees F). These pipes are widely used in the oil & gas, petrochemical, power generation and ship-building industries (examples: refineries, downstream plants, vessels. boilers and towers). A106 pipes are particulary suited whenever the trasported fluid has either high temperature or high pressure (or both combined). ASTM A106 / SA106 pipes are available in size range from 1/2 to 28 inches, and in pipe schedules from 10 to 160. These pipes are supplied either in single random lenght (17-24') or double random lenght (36 -44'). In terms of material grades, A106 pipes are manufactured in grade A, B and C. NPS 1-1/2? and below are available in the hot finished or by cold drawn type. Pipes of NPS 2 inch and above are generally are hot rolled manufatured. A106 pipes are produced out of killed steel. The chemical composition and Machanical Property of the three grades of ASTM A106 is shown in the following table: Chemical composition: Chemical composition, % Element C Mn P S Si Cr Cu Mo Ni V max max max min max max max max max A106 Grade A 0.25 0.27-0.93 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 A106 Grade B 0.30 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 A106 Grade C 0.35 0.29-1.06 0.035 0.035 0.10 0.40 0.40 0.15 0.40 0.08 Machanical Property: ASTM A106 pipe Grade A Grade B Grade C Tensile Strength, min., psi 48,000 60,000 70,000 Yield Strength, min., psi 30,000 35,000 40,000 Hdrostatic Test of A106 pipes: The hydrotest shall apply a pressure equal to 60% of the minimum yield strenght for at least 5 seconds at atmospheric conditions. The maximum pressure shall not exceed 2500 psi for pipes up to 3 inches, and 2800 for larger sizes. If additional, non standard, tests are executed, the pipe shall bear an "S" mark on each lenght or pipe bundle. Pipe marking:Each lenght of pipe (or bundle for smaller diameters) shall have the following markings applied: Manufacturer name Material grade(ASTM A106 A / B / C ) Diameter and ANSI schedule (from 10 to 160 and XXS) Pipe lenght Heat number Hydrostatic test pressure or NDE Weight / foot
