We can offer the following steel pipes:
OD 530 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 550 USD
OD 630 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 570 USD
OD 720 mm x WT 7-9mm. Quantity 3000 tn. FOB Novorossijsk 525 USD
OD 820 mm x WT 8-9mm. Quantity 2000 tn. FOB Novorossijsk 540 USD
OD 1020 mm x WT 10-12mm. Quantity 1000 tn. FOB Novorossijsk 570 USD
OD 1220 mm x WT 12-13mm. Quantity 1000 tn. FOB Novorossijsk 570 USD
OD 1420 mm x WT 15.7-16.8mm. Quantity 3000 tn. FOB Novorossijsk 590 USD
Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
Steel pipes 1020mm x10-12mm
We can supply steel pipe OD 1020 mm x WT 10-12mm. Quantity 1000 tn.
FOB Novorossijsk 570 USD.
Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
For more information can write directly to . I can offer delivery pricing.
We can offer the following steel pipes:
OD 530 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 550 USD.
Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
11037 Steel Pipes Suppliers
Short on time? Let Steel Pipes sellers contact you.
We can supply used steel pipe OD 720 mm x WT 7-9mm. Quantity 3000 tn.
FOB Novorossijsk 525 USD.
Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
We can supply used steel pipe OD 820 mm x WT 8-9mm. Quantity 2000 tn.
FOB Novorossijsk 540 USD.
Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
1. NBK(+N) of seamless pipe
after cold forming, eventually above phase transition point, in a protective atmosphere of annealing oxidation medium
2. GBK(+A) of seamless pipe
after cold forming, annealing in non oxidizing medium protective gas
3. BK(+C) of seamless pipe
the final heat treatment after cold forming, therefore small steel pipe plastically, the plastically degree does not guarantee
4. BKW(+LC) of seamless pipe
after final heat treatment, a tiny cold drawing deformation, continue again when machining steel pipe allowed inside certain limits cold deformation(bending, flaring)
5. BKS(+SR) of seamless pipe
have a stress relief after cold forming, heat treatment, carbon steel pipe can be carried out within a certain limit in the appropriate processing again
Company & workshop:
Yantai Xinpeng Steel Pipe Co., Ltd,established in Dec 1992, with registered capital of 5 million Yuan, we have more than 20 years experience in manufacturing and exporting seamless carbon steel pipe. Our company mainly produces various specifications of cold finished carbon steel pipe, which are widely used in hydraulic Pneumatic cylinder for automobile, engineering machinery, textile machinery, hydraulic breaker, elevator buffer, printing machinery, oil drilling and other field.
What we can provide are carbon steel tube, seamless steel tube, cold drawn steel tube, cold rolled steel tube, honed steel tube, skived and roller burnished steel tube, polished steel tube, skived and roller burnished steel tube, hydraulic steel tube, cylinder steel tube, and so on.
seamless tube, seamless pipe, carbon tube, cold drawn tube, cold rolled tube, honed tube, hydraulic tube, cylinder tube, hydraulic cylinder tube.......
Our company are equipped with JLB250T hydraulic cold drawn set,LED120 cold rolling set, annealing surface, strong honed machine, polishing machine, lathe, saws CNC skived and roller burnished machine, kinds of testing machine. Strictly comply with ISO9001 System, assure the best quality of carbon steel tube and seamless steel tube.
Tubing
Tubing
1) Size: O.D. 1.900", 2-3/8", 2-7/8", 3-1/2", 4-1/2"
2) Grade: J55, N80, L80, C90, T95, P110
3) Wall thickness: 3.18 - 10.54mm
4) Length: R1,R2,R3
5) Thread: 8RD and 10RD
6) All our Tubing accord with API SPEC 5CT standard, and we get the right to use the API 5CT LOGO.
Size Desination Weight Desination Outside Diameter Wall Thickness Type of End Finish
Grade
T&C Non-Upset T&C External Upset in mm in mm J55 K55 L80 N80 C90 T95 P110
1.900 2.40 - 1.900 48.26 0.125 3.18 PI - - - - -
2.75 2.90 0.145 3.68 PNUI PNUI PNUI PNUI PNUI -
3.65 3.73 0.200 5.08 PU PU PU PU PU PU
4.42 - 0.250 6.35 - P - P P -
5.15 - 0.300 7.62 - P - P P -
2 3/8 4.00 - 2.375 60.3 0.167 4.24 PN PN PN PN PN -
4.00 4.70 0.190 4.83 PNU PNU PNU PNU PNU PNU
5.80 5.95 0.254 6.45 - PNU PNU PNU PNU PNU
6.60 - 0.259 7.49 P P P P P -
7.35 7.45 0.336 8.53 PU PU PU PU PU -
2 7/8 6.40 6.50 2.875 73.02 0.217 5.51 PNU PNU PNU PNU PNU PNU
7.80 7.90 0.276 7.01 - PNU PNU PNU PNU PNU
8.60 8.70 0.308 7.82 - PNU PNU PNU PNU PNU
9.35 9.45 0.340 8.64 - PU - PU PU -
10.50 - 0.392 9.96 - P - P P -
11.50 - 0.440 11.18 - P - P P -
3 1/2 7.70 - 3.500 88.9 0.216 5.49 PN PN PN PN PN -
9.20 9.30 0.254 6.45 PUN PUN PUN PNU PNU PUN
10.20 - 0.289 7.34 PN PN PN PN PN -
12.70 12.95 0.375 9.53 - PUN PUN PNU PNU PUN
14.30 - 0.430 10.92 - P - P P -
15.50 - 0.476 12.00 - P - P P -
17.00 - 0.530 13.46 - P - P P -
4 9.50 - 4.00 101.6 0.226 5.74 PN PN PN PN PN PN
10.70
11.00 0.262 6.65 PU PU PU PU PU PU
4 1/2 12.60 12.75 4.500 114.3 0.271 6.88 PNU PNU PNU PNU PNU -
15.20 - 0.337 8.56 - P - P P -
17.00 - 0.380 9.65 - P - P P -
18.90 - 0.430 10.92 - P - P P -
21.50 - 0.500 12.70 - P - P P -
23.70 - 0.560 14.22 - P - P P -
26.10 - 0.630 16.00 - P - P P -
Steel pipes 1420mm x15.7-16.8mm
We can supply steel pipe OD 1420 mm x WT 15.7-16.8mm. Quantity 3000 tn.
FOB Novorossijsk 590 USD.
Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
Steel pipes 1220mm x10-12mm
We can supply steel pipe OD 1220 mm x WT 12-13mm. Quantity 1000 tn.
FOB Novorossijsk 570 USD.
Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
For more information can write directly to . I can offer delivery pricing.
We can offer the following steel pipes:
OD 530 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 550 USD
OD 630 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 570 USD
OD 720 mm x WT 7-9mm. Quantity 3000 tn. FOB Novorossijsk 525 USD
OD 820 mm x WT 8-9mm. Quantity 2000 tn. FOB Novorossijsk 540 USD
OD 1020 mm x WT 10-12mm. Quantity 1000 tn. FOB Novorossijsk 570 USD
OD 1220 mm x WT 12-13mm. Quantity 1000 tn. FOB Novorossijsk 570 USD
OD 1420 mm x WT 15.7-16.8mm. Quantity 3000 tn. FOB Novorossijsk 590 USD
Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
We can offer the following steel pipes:
OD 630 mm x WT 7-8mm. Quantity 1000 tn. FOB Novorossijsk 570 USD.
Pipes are LSAW (straight seam) , steel grade -3SP5, beveled ends, restored/shot-blasted. Previously were used under gas and oil products.
1 technical specification (standard):
Dl t5030-1996 technical specification for concrete structures of centrifugal thin-walled pipe
Dl t646-1998 transmission line steel pipe manufacturing technology conditions
2 (1)centrifugal thin-walled steel structure characteristics:
A:reduce steel consumption, saving the cost of more than 20%
B:good appearance, improve the local stability of the structure, increasing the section stiffness, reducing distortion.
C:not easy to transport due to great mass.
(2)steel pole features: (circular, polygonal):
A:light weight
B:good appearance.
C:easy to install
3 the scope of application:
10kv-220kv various rod-type, but the thin-walled steel centrifugal concrete structure itself brought a large weight on transportation and installation difficulties. Bearing capacity of the structure is too complicated or too much, should adopt steel structure.
4 tower form and code:
Single circuit. Straight line z, strain is n, corner of j, a branch of f
Double-circuit, line for sz, strain for sn, corner of sj.
5 flange bolt connection type, common type, the cup insert type. Roof welded base.
6 tower type number:
Eg:110kva down the line tower type number
7 the technical parameters of the sample provided for reference only, the specific design should be calculated according to the actual conditions of the load, the technical parameters of anchor bolt weight not included.
8 connecting rod segment forms: flange connection, socket type, spot welding (15m or less the whole rod can transport, without live connection)
Product Introduce:
Hot dipping plastic steel protecting pipe is made of high quality steel, high mechanical strength, bearing capacity is strong, Electrical insulation performance, High hardness and smooth surface inside and outside, Small friction coefficient, Good flame retardant.
Product Application:
Use for Electricity, communications, transportation, municipal administration, mine, petroleum, chemical industry pipeline system construction, etc.
Product Features:
1, Superior antistatic performance
2, Fame retardant performance
3, Strong coating adhesion
4, Superior mechanical properties
5, Corrosion resistance, No scaling, Fluid resistance is small
6, Self lubrication
with high quality China manufacturer ssaw steel line pipe
OD:219mm-3040mm
Wall thickness: 5.0-25mm
Standard:API 5L,ASTM A53,ASTM A252,EN10217
payment terms:LC/TT
Product
with high quality China manufacturer ssaw steel line pipe
Specification
Section shape: round
Thickness: 5.0mm to 25mm
Outer diameter: 219mm to 3040mm
Standard
BS1387,GB3091,ASTMA53, B36.10, BS EN1029, API 5L, GB/T9711 etc
Material
Q195, Q235, Q345; ASTM A53 GrA,GrB; STKM11,ST37,ST52, 16Mn,etc.
Fabrication
Plain ends, cutting, threading, etc
Surface Treatment
1. Galvanized
2. PVC,black and color painting
3. Transparent oil,anti-rust oil
4. According to clients requirement
Package
1. Bundle
2. Bulk
3. Plastic bags ,etc
Min order
10 tons, more quantity price will be lower
Payment terms
T/T, L/C at sight, western union etc.
Deliver time
Within 7-30 days after deposit, ASAP
Product introduction
The normal valve that is widely used in the market for a long time,which has the problem of leaking and easy to rust.Our company adopt soft sealing gate valve that produced by foreign advanced technology,overcome the shortage of normal gate valves,including poor sealing,elastic fatique and easy to rust.It's the update production of tradition valves.it takes advantage of compensation effect that comes out from mircoscale transformation of flexible disc,achieving good sealing effect.It has the remarkable virtue of switch convenient,reliable seal,better elatic memory,long lifetime and etc.It's utillized as the controlling and checking equipment in tap water, construction, food, electric,medicine,metallurgy,light textile,waste water,energy system and so on fluid pipeline.
Structure and characteristic
1.Entirety rubber coating valve core which skeleton is nodular cast iron,high performance rubber and lastest vulcanization technology clads all the inside and outside machine body,tight fit,excellent elastic seal to reach "0"leak.
2.Three o-rings design,firm tight,fictional resistance decrease largely and environment sanitary,change the rubber gasket withou stop the water.
3.Corrosion resistance,inside and outside is painted by epoxy resin,the inner parts ads stainless steel and copper alloy to prevent rust and fluid corrosion.Can directly uses in domestic water,medicine and etc business.
Hebei Guanlin Vales Manufacturing Co.,Ltd is located in No.2 road of botou economic developing zone,hebei,which is famous as the name of "town of the casting",Facing the challenge of economic globalization,our company is determined to make valves and pipe bigger and stronger, with the goal of producing high quality productions.With 26 million CNY additional capital,update from three ways including equipment and scientific research,at the same time coorperate with Shanghai Tongji University.Invent the next generation locked valve(patent number 201220400904.X),invent anti-off tube in 2013(patent number 201320812627.8).
Main products are soft seal gate valves,new type the next generation locked valves,leak stopper,flange type two join-three direct links,water meter flexible filter,flexiblity unions malleable,soft flexibility expansion pipe,vertical connecting pipe,water diversion lip, fastener anti theft well lid, water power control valves,check valves,air release valves,ductile iron pipe and etc series products,widely used in all kinds of pipeline and device for the business of tap water,drainage,coal,gas,fire control, chemical,mine,railway.
Product Description:
our principal product is galvanized steel pipe which can adapt to different types of situations no matter wet or sunny spell. As we all know, there is a zinc layer on the surface of galvanized steel pipe. For the layer of zinc, our company can customize it according to your requests. So before purchasing steel pipes, you should assess the environment of your project. For pre galvanized steel pipe, it is prevail in arid zones with little rain. While in hot and humid environment, hot dip galvanized steel pipe take more advantage over pre galvanized steel pipe. All in all, we are meticulous about zinc layer.
Product Feature:
We have a professional pipe production & processing team. Our workers are all rich in practical experience for many years. Our company will regularly organize a variety of professional production training and skills assessment activities, in order to strengthen the professional skills of employees and their integrated professional quality. Moreover, our company has a series of practically perfect systems from the production to the organization so as to secure the stability of the product quality as well as to ensure the ultimate effectiveness of different pipes for actual purposes in life.
Application:
for consigning and packing, we are always taking it into serious consideration. During the process of packing, we load products with great careful in order to prevent steel pipes from scratching. We put customers' interests on the first place, so we adopt special packing methods such as inserting small pipes into large pipes with a determination to reduce space occupation. With smaller occupation of container space, the cost of consigning is reduced which is in accordance with the interest of customers. You can also put forward other requirements about packing or consigning.
11037 Steel Pipes Suppliers
Short on time? Let Steel Pipes sellers contact you.
